[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240819123400.GU3468552@ziepe.ca>
Date: Mon, 19 Aug 2024 09:34:00 -0300
From: Jason Gunthorpe <jgg@...pe.ca>
To: Baolu Lu <baolu.lu@...ux.intel.com>
Cc: Vasant Hegde <vasant.hegde@....com>, Joerg Roedel <joro@...tes.org>,
Will Deacon <will@...nel.org>, Robin Murphy <robin.murphy@....com>,
Kevin Tian <kevin.tian@...el.com>, Yi Liu <yi.l.liu@...el.com>,
iommu@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/1] iommu/vt-d: Move PCI PASID enablement to probe path
On Mon, Aug 19, 2024 at 03:09:00PM +0800, Baolu Lu wrote:
> On 2024/8/19 14:34, Vasant Hegde wrote:
> > On 8/16/2024 6:39 PM, Baolu Lu wrote:
> > > On 2024/8/16 20:16, Vasant Hegde wrote:
> > > > On 8/16/2024 4:19 PM, Lu Baolu wrote:
> > > > > Currently, PCI PASID is enabled alongside PCI ATS when an iommu domain is
> > > > > attached to the device and disabled when the device transitions to block
> > > > > translation mode. This approach is inappropriate as PCI PASID is a device
> > > > > feature independent of the type of the attached domain.
> > > > Reading through other thread, I thought we want to enable both PASID and PRI in
> > > > device probe path. Did I miss something?
> > > PRI is different. PRI should be enabled when the first iopf-capable
> > > domain is attached to device or its PASID, and disabled when the last
> > > such domain is detached.
> > Right. That's what AMD driver also does (We enable it when we attach IOPF
> > capable domain). But looking into pci_enable_pri() :
> >
> >
> > 202 /*
> > 203 * VFs must not implement the PRI Capability. If their PF
> > 204 * implements PRI, it is shared by the VFs, so if the PF PRI is
> > 205 * enabled, it is also enabled for the VF.
> > 206 */
> > 207 if (pdev->is_virtfn) {
> > 208 if (pci_physfn(pdev)->pri_enabled)
> > 209 return 0;
> > 210 return -EINVAL;
> > 211 }
> > 212
> >
> >
> > If we try to enable PRI for VF without first enabling it in PF it will fail right?
> >
> > Now if PF is attached to non-IOPF capable domain (like in AMD case attaching to
> > domain with V1 page table) and we try to attach VF to IOPF capable domain (say
> > AMD v2 page table -OR- nested domain) it will fail right?
>
> Yeah! So, the iommu driver should basically control the PRI switch on
> the PF whenever someone wants to use it on a VF.
PRI enable sounds like PASID enable to me.
The ATS control is per VF/PF, and PRI does nothing unless ATS returns
a non-present indication.
Like PASID, it seems the purpose of PRI caps is to negotiate if the
CPU can process PRI TLPs globally.
So, I'd guess that just like PASID we should turn it on at PF probe
time if the IOMMU can globall handle PRI.
Enabling ATS will cause PRI TLPs to be sent.
Probably more of this code should be lifted out of the iommu drivers..
Jason
Powered by blists - more mailing lists