| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZsTL1QQgYjVdfzqj@fan>
Date: Tue, 20 Aug 2024 10:01:09 -0700
From: Fan Ni <nifan.cxl@...il.com>
To: Dave Jiang <dave.jiang@...el.com>
Cc: ira.weiny@...el.com, Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Navneet Singh <navneet.singh@...el.com>, Chris Mason <clm@...com>,
Josef Bacik <josef@...icpanda.com>, David Sterba <dsterba@...e.com>,
Petr Mladek <pmladek@...e.com>,
Steven Rostedt <rostedt@...dmis.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Sergey Senozhatsky <senozhatsky@...omium.org>,
Jonathan Corbet <corbet@....net>,
Andrew Morton <akpm@...ux-foundation.org>,
Dan Williams <dan.j.williams@...el.com>,
Davidlohr Bueso <dave@...olabs.net>,
Alison Schofield <alison.schofield@...el.com>,
Vishal Verma <vishal.l.verma@...el.com>,
linux-btrfs@...r.kernel.org, linux-cxl@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
nvdimm@...ts.linux.dev, "Li, Ming" <ming4.li@...el.com>
Subject: Re: [PATCH v3 06/25] cxl/mem: Read dynamic capacity configuration
from the device
On Fri, Aug 16, 2024 at 02:45:47PM -0700, Dave Jiang wrote:
>
>
> On 8/16/24 7:44 AM, ira.weiny@...el.com wrote:
> > From: Navneet Singh <navneet.singh@...el.com>
> >
> > Devices which optionally support Dynamic Capacity (DC) are configured
> > via mailbox commands. CXL 3.1 requires the host to issue the Get DC
> > Configuration command in order to properly configure DCDs. Without the
> > Get DC Configuration command DCD can't be supported.
> >
> > Implement the DC mailbox commands as specified in CXL 3.1 section
> > 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration
> > information. Disable DCD if DCD is not supported. Leverage the Get DC
> > Configuration command supported bit to indicate if DCD support.
> >
> > Linux has no use for the trailing fields of the Get Dynamic Capacity
> > Configuration Output Payload (Total number of supported extents, number
> > of available extents, total number of supported tags, and number of
> > available tags). Avoid defining those fields to use the more useful
> > dynamic C array.
> >
> > Cc: "Li, Ming" <ming4.li@...el.com>
> > Signed-off-by: Navneet Singh <navneet.singh@...el.com>
> > Co-developed-by: Ira Weiny <ira.weiny@...el.com>
> > Signed-off-by: Ira Weiny <ira.weiny@...el.com>
> >
> > ---
> > Changes:
> > [Li, Ming: Fix bug in total_bytes calculation]
> > [iweiny: update commit message]
> > [Jonathan: fix formatting]
> > [Jonathan: Define block line size]
> > [Jonathan/Fan: use regions returned field instead of macro in get config]
> > [Jørgen: Rename memdev state range variables]
> > [Jonathan: adjust use of rc in cxl_dev_dynamic_capacity_identify()]
> > [Jonathan: white space cleanup]
> > [fan: make a comment about the trailing configuration output fields]
> > ---
> > drivers/cxl/core/mbox.c | 171 +++++++++++++++++++++++++++++++++++++++++++++++-
> > drivers/cxl/cxlmem.h | 64 +++++++++++++++++-
> > drivers/cxl/pci.c | 4 ++
> > 3 files changed, 237 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> > index 8eb196858abe..68c26c4be91a 100644
> > --- a/drivers/cxl/core/mbox.c
> > +++ b/drivers/cxl/core/mbox.c
> > @@ -1157,7 +1157,7 @@ int cxl_dev_state_identify(struct cxl_memdev_state *mds)
> > if (rc < 0)
> > return rc;
> >
> > - mds->total_bytes =
> > + mds->static_bytes =
> > le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER;
> > mds->volatile_only_bytes =
> > le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER;
> > @@ -1264,6 +1264,159 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd)
> > return rc;
> > }
> >
> > +static int cxl_dc_save_region_info(struct cxl_memdev_state *mds, u8 index,
> > + struct cxl_dc_region_config *region_config)
> > +{
> > + struct cxl_dc_region_info *dcr = &mds->dc_region[index];
> > + struct device *dev = mds->cxlds.dev;
> > +
> > + dcr->base = le64_to_cpu(region_config->region_base);
> > + dcr->decode_len = le64_to_cpu(region_config->region_decode_length);
> > + dcr->decode_len *= CXL_CAPACITY_MULTIPLIER;
> > + dcr->len = le64_to_cpu(region_config->region_length);
> > + dcr->blk_size = le64_to_cpu(region_config->region_block_size);
> > + dcr->dsmad_handle = le32_to_cpu(region_config->region_dsmad_handle);
> > + dcr->flags = region_config->flags;
> > + snprintf(dcr->name, CXL_DC_REGION_STRLEN, "dc%d", index);
> > +
> > + /* Check regions are in increasing DPA order */
> > + if (index > 0) {
> > + struct cxl_dc_region_info *prev_dcr = &mds->dc_region[index - 1];
> > +
> > + if ((prev_dcr->base + prev_dcr->decode_len) > dcr->base) {
> > + dev_err(dev,
> > + "DPA ordering violation for DC region %d and %d\n",
> > + index - 1, index);
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + if (!IS_ALIGNED(dcr->base, SZ_256M) ||
> > + !IS_ALIGNED(dcr->base, dcr->blk_size)) {
> > + dev_err(dev, "DC region %d invalid base %#llx blk size %#llx\n",
> > + index, dcr->base, dcr->blk_size);
> > + return -EINVAL;
> > + }
> > +
> > + if (dcr->decode_len == 0 || dcr->len == 0 || dcr->decode_len < dcr->len ||
> > + !IS_ALIGNED(dcr->len, dcr->blk_size)) {
> > + dev_err(dev, "DC region %d invalid length; decode %#llx len %#llx blk size %#llx\n",
> > + index, dcr->decode_len, dcr->len, dcr->blk_size);
> > + return -EINVAL;
> > + }
> > +
> > + if (dcr->blk_size == 0 || dcr->blk_size % CXL_DCD_BLOCK_LINE_SIZE ||
> > + !is_power_of_2(dcr->blk_size)) {
> > + dev_err(dev, "DC region %d invalid block size; %#llx\n",
> > + index, dcr->blk_size);
> > + return -EINVAL;
> > + }
> > +
> > + dev_dbg(dev,
> > + "DC region %s base %#llx length %#llx block size %#llx\n",
> > + dcr->name, dcr->base, dcr->decode_len, dcr->blk_size);
> > +
> > + return 0;
> > +}
> > +
> > +/* Returns the number of regions in dc_resp or -ERRNO */
> > +static int cxl_get_dc_config(struct cxl_memdev_state *mds, u8 start_region,
> > + struct cxl_mbox_get_dc_config_out *dc_resp,
> > + size_t dc_resp_size)
> > +{
> > + struct cxl_mbox_get_dc_config_in get_dc = (struct cxl_mbox_get_dc_config_in) {
> > + .region_count = CXL_MAX_DC_REGION,
> > + .start_region_index = start_region,
> > + };
> > + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) {
> > + .opcode = CXL_MBOX_OP_GET_DC_CONFIG,
> > + .payload_in = &get_dc,
> > + .size_in = sizeof(get_dc),
> > + .size_out = dc_resp_size,
> > + .payload_out = dc_resp,
> > + .min_out = 1,
> > + };
> > + struct device *dev = mds->cxlds.dev;
> > + int rc;
> > +
> > + rc = cxl_internal_send_cmd(mds, &mbox_cmd);
> > + if (rc < 0)
> > + return rc;
> > +
> > + dev_dbg(dev, "Read %d/%d DC regions\n",
> > + dc_resp->regions_returned, dc_resp->avail_region_count);
> > + return dc_resp->regions_returned;
> > +}
> > +
> > +/**
> > + * cxl_dev_dynamic_capacity_identify() - Reads the dynamic capacity
> > + * information from the device.
> > + * @mds: The memory device state
> > + *
> > + * Read Dynamic Capacity information from the device and populate the state
> > + * structures for later use.
> > + *
> > + * Return: 0 if identify was executed successfully, -ERRNO on error.
> > + */
> > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds)
> > +{
> > + size_t dc_resp_size = mds->payload_size;
> > + struct device *dev = mds->cxlds.dev;
> > + u8 start_region, i;
> > +
> > + for (i = 0; i < CXL_MAX_DC_REGION; i++)
> > + snprintf(mds->dc_region[i].name, CXL_DC_REGION_STRLEN, "<nil>");
> > +
> > + if (!cxl_dcd_supported(mds)) {
> > + dev_dbg(dev, "DCD not supported\n");
> > + return 0;
> > + }
>
> This should happen before you pre-format the name string? I would assume that if DCD is not supported then the dcd name sysfs attribs would be not be visible?
>
> > +
> > + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) =
> > + kvmalloc(dc_resp_size, GFP_KERNEL);
> > + if (!dc_resp)
> > + return -ENOMEM;
> > +
> > + start_region = 0;
> > + do {
> > + int rc, j;
> > +
> > + rc = cxl_get_dc_config(mds, start_region, dc_resp, dc_resp_size);
> > + if (rc < 0) {
> > + dev_dbg(dev, "Failed to get DC config: %d\n", rc);
> > + return rc;
> > + }
> > +
> > + mds->nr_dc_region += rc;
> > +
> > + if (mds->nr_dc_region < 1 || mds->nr_dc_region > CXL_MAX_DC_REGION) {
> > + dev_err(dev, "Invalid num of dynamic capacity regions %d\n",
> > + mds->nr_dc_region);
> > + return -EINVAL;
> > + }
> > +
> > + for (i = start_region, j = 0; i < mds->nr_dc_region; i++, j++) {
>
> This should be 'j < mds->nr_dc_region'? Otherwise if your start region say is '3' and you have '2' DC regions, you never enter the loop. Or does that not happen? I also wonder if you need to check if 'start_region + mds->nr_dc_region > CXL_MAX_DC_REGION'.
>
That can not happen, start_region was updated to the number of regions
has returned till now (not counting the current call), while
nr_dc_region is the total number of regions returned till now (including
the current call) as we update it above, so start_region should never be larger
than nr_dc_region.
> > + rc = cxl_dc_save_region_info(mds, i, &dc_resp->region[j]);
> > + if (rc) {
> > + dev_dbg(dev, "Failed to save region info: %d\n", rc);
I am not sure why we sometimes use dev_err and sometimes we use dev_dbg
here, if dcd is supported, error from getting dc configuration is an
error to me.
Fan
> > + return rc;
> > + }
> > + }
> > +
> > + start_region = mds->nr_dc_region;
> > +
> > + } while (mds->nr_dc_region < dc_resp->avail_region_count);
> > +
> > + mds->dynamic_bytes =
> > + mds->dc_region[mds->nr_dc_region - 1].base +
> > + mds->dc_region[mds->nr_dc_region - 1].decode_len -
> > + mds->dc_region[0].base;
> > + dev_dbg(dev, "Total dynamic range: %#llx\n", mds->dynamic_bytes);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(cxl_dev_dynamic_capacity_identify, CXL);
> > +
> > static int add_dpa_res(struct device *dev, struct resource *parent,
> > struct resource *res, resource_size_t start,
> > resource_size_t size, const char *type)
> > @@ -1294,8 +1447,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
> > {
> > struct cxl_dev_state *cxlds = &mds->cxlds;
> > struct device *dev = cxlds->dev;
> > + size_t untenanted_mem;
> > int rc;
> >
> > + mds->total_bytes = mds->static_bytes;
> > + if (mds->nr_dc_region) {
> > + untenanted_mem = mds->dc_region[0].base - mds->static_bytes;
> > + mds->total_bytes += untenanted_mem + mds->dynamic_bytes;
> > + }
> > +
> > if (!cxlds->media_ready) {
> > cxlds->dpa_res = DEFINE_RES_MEM(0, 0);
> > cxlds->ram_res = DEFINE_RES_MEM(0, 0);
> > @@ -1305,6 +1465,15 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
> >
> > cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes);
> >
> > + for (int i = 0; i < mds->nr_dc_region; i++) {
> > + struct cxl_dc_region_info *dcr = &mds->dc_region[i];
> > +
> > + rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->dc_res[i],
> > + dcr->base, dcr->decode_len, dcr->name);
> > + if (rc)
> > + return rc;
> > + }
> > +
> > if (mds->partition_align_bytes == 0) {
> > rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
> > mds->volatile_only_bytes, "ram");
> > diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> > index f2f8b567e0e7..b4eb8164d05d 100644
> > --- a/drivers/cxl/cxlmem.h
> > +++ b/drivers/cxl/cxlmem.h
> > @@ -402,6 +402,7 @@ enum cxl_devtype {
> > CXL_DEVTYPE_CLASSMEM,
> > };
> >
> > +#define CXL_MAX_DC_REGION 8
> > /**
> > * struct cxl_dpa_perf - DPA performance property entry
> > * @dpa_range: range for DPA address
> > @@ -431,6 +432,8 @@ struct cxl_dpa_perf {
> > * @dpa_res: Overall DPA resource tree for the device
> > * @pmem_res: Active Persistent memory capacity configuration
> > * @ram_res: Active Volatile memory capacity configuration
> > + * @dc_res: Active Dynamic Capacity memory configuration for each possible
> > + * region
> > * @serial: PCIe Device Serial Number
> > * @type: Generic Memory Class device or Vendor Specific Memory device
> > */
> > @@ -445,10 +448,22 @@ struct cxl_dev_state {
> > struct resource dpa_res;
> > struct resource pmem_res;
> > struct resource ram_res;
> > + struct resource dc_res[CXL_MAX_DC_REGION];
> > u64 serial;
> > enum cxl_devtype type;
> > };
> >
> > +#define CXL_DC_REGION_STRLEN > +struct cxl_dc_region_info {
> > + u64 base;
> > + u64 decode_len;
> > + u64 len;
> > + u64 blk_size;
> > + u32 dsmad_handle;
> > + u8 flags;
> > + u8 name[CXL_DC_REGION_STRLEN];
> > +};
>
> Does this need kdoc comments?
>
>
> > +
> > /**
> > * struct cxl_memdev_state - Generic Type-3 Memory Device Class driver data
> > *
> > @@ -466,7 +481,9 @@ struct cxl_dev_state {
> > * @dcd_cmds: List of DCD commands implemented by memory device
> > * @enabled_cmds: Hardware commands found enabled in CEL.
> > * @exclusive_cmds: Commands that are kernel-internal only
> > - * @total_bytes: sum of all possible capacities
> > + * @total_bytes: length of all possible capacities
> > + * @static_bytes: length of possible static RAM and PMEM partitions
> > + * @dynamic_bytes: length of possible DC partitions (DC Regions)
>
> Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'?
> > * @volatile_only_bytes: hard volatile capacity
> > * @persistent_only_bytes: hard persistent capacity
> > * @partition_align_bytes: alignment size for partition-able capacity
> > @@ -476,6 +493,8 @@ struct cxl_dev_state {
> > * @next_persistent_bytes: persistent capacity change pending device reset
> > * @ram_perf: performance data entry matched to RAM partition
> > * @pmem_perf: performance data entry matched to PMEM partition
> > + * @nr_dc_region: number of DC regions implemented in the memory device
> > + * @dc_region: array containing info about the DC regions
> Did this get added to the wrong struct comment header? 'cxl_dev_state' instead of 'cxl_memdev_state'?
>
> DJ
>
> > * @event: event log driver state
> > * @poison: poison driver state info
> > * @security: security driver state info
> > @@ -496,6 +515,8 @@ struct cxl_memdev_state {
> > DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX);
> > DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
> > u64 total_bytes;
> > + u64 static_bytes;
> > + u64 dynamic_bytes;
> > u64 volatile_only_bytes;
> > u64 persistent_only_bytes;
> > u64 partition_align_bytes;
> > @@ -507,6 +528,9 @@ struct cxl_memdev_state {
> > struct cxl_dpa_perf ram_perf;
> > struct cxl_dpa_perf pmem_perf;
> >
> > + u8 nr_dc_region;
> > + struct cxl_dc_region_info dc_region[CXL_MAX_DC_REGION];
> > +
> > struct cxl_event_state event;
> > struct cxl_poison_state poison;
> > struct cxl_security_state security;
> > @@ -709,6 +733,32 @@ struct cxl_mbox_set_partition_info {
> >
> > #define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0)
> >
> > +/* See CXL 3.1 Table 8-163 get dynamic capacity config Input Payload */
> > +struct cxl_mbox_get_dc_config_in {
> > + u8 region_count;
> > + u8 start_region_index;
> > +} __packed;
> > +
> > +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */
> > +struct cxl_mbox_get_dc_config_out {
> > + u8 avail_region_count;
> > + u8 regions_returned;
> > + u8 rsvd[6];
> > + /* See CXL 3.1 Table 8-165 */
> > + struct cxl_dc_region_config {
> > + __le64 region_base;
> > + __le64 region_decode_length;
> > + __le64 region_length;
> > + __le64 region_block_size;
> > + __le32 region_dsmad_handle;
> > + u8 flags;
> > + u8 rsvd[3];
> > + } __packed region[];
> > + /* Trailing fields unused */
> > +} __packed;
> > +#define CXL_DYNAMIC_CAPACITY_SANITIZE_ON_RELEASE_FLAG BIT(0)
> > +#define CXL_DCD_BLOCK_LINE_SIZE 0x40
> > +
> > /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */
> > struct cxl_mbox_set_timestamp_in {
> > __le64 timestamp;
> > @@ -832,6 +882,7 @@ enum {
> > int cxl_internal_send_cmd(struct cxl_memdev_state *mds,
> > struct cxl_mbox_cmd *cmd);
> > int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> > +int cxl_dev_dynamic_capacity_identify(struct cxl_memdev_state *mds);
> > int cxl_await_media_ready(struct cxl_dev_state *cxlds);
> > int cxl_enumerate_cmds(struct cxl_memdev_state *mds);
> > int cxl_mem_create_range_info(struct cxl_memdev_state *mds);
> > @@ -845,6 +896,17 @@ void cxl_event_trace_record(const struct cxl_memdev *cxlmd,
> > enum cxl_event_log_type type,
> > enum cxl_event_type event_type,
> > const uuid_t *uuid, union cxl_event *evt);
> > +
> > +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds)
> > +{
> > + return test_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds);
> > +}
> > +
> > +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds)
> > +{
> > + clear_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds);
> > +}
> > +
> > int cxl_set_timestamp(struct cxl_memdev_state *mds);
> > int cxl_poison_state_init(struct cxl_memdev_state *mds);
> > int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len,
> > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> > index 3a60cd66263e..f7f03599bc83 100644
> > --- a/drivers/cxl/pci.c
> > +++ b/drivers/cxl/pci.c
> > @@ -874,6 +874,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> > if (rc)
> > return rc;
> >
> > + rc = cxl_dev_dynamic_capacity_identify(mds);
> > + if (rc)
> > + cxl_disable_dcd(mds);
> > +
> > rc = cxl_mem_create_range_info(mds);
> > if (rc)
> > return rc;
> >
Powered by blists - more mailing lists