[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240820085517.435566-4-quic_gokulsri@quicinc.com>
Date: Tue, 20 Aug 2024 14:25:16 +0530
From: Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
To: <andersson@...nel.org>, <krzk+dt@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <quic_viswanat@...cinc.com>, <quic_mmanikan@...cinc.com>,
<quic_varada@...cinc.com>, <quic_srichara@...cinc.com>
Subject: [PATCH 3/4] arm64: dts: qcom: ipq5332: add nodes to bringup q6
From: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
Enable nodes required for q6 remoteproc bring up.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 62 +++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 0a74ed4f72cc..ec93e7b64b9e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -145,6 +145,11 @@ smem@...00000 {
hwlocks = <&tcsr_mutex 3>;
};
+
+ q6_region: wcnss@...00000 {
+ reg = <0x0 0x4a900000 0x0 0x2b00000>;
+ no-map;
+ };
};
soc@0 {
@@ -476,6 +481,39 @@ frame@...8000 {
status = "disabled";
};
};
+
+ q6v5_wcss: remoteproc@...0000 {
+ compatible = "qcom,ipq5332-wcss-sec-pil";
+ reg = <0xd100000 0x4040>;
+ firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mdt";
+ interrupts-extended = <&intc GIC_SPI 421 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&gcc GCC_IM_SLEEP_CLK>;
+ clock-names = "im_sleep";
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+
+ memory-region = <&q6_region>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+ };
+ };
};
timer {
@@ -485,4 +523,28 @@ timer {
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ wcss: wcss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 418 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 9>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
};
--
2.34.1
Powered by blists - more mailing lists