[<prev] [next>] [day] [month] [year] [list]
Message-ID: <6bbf4c9ff7f14cab99c39090d9fd9628@realtek.com>
Date: Wed, 21 Aug 2024 02:47:23 +0000
From: Max Chou <max.chou@...ltek.com>
To: Paul Menzel <pmenzel@...gen.mpg.de>
CC: Marcel Holtmann <marcel@...tmann.org>,
Luiz Augusto von Dentz
<luiz.dentz@...il.com>,
"linux-bluetooth@...r.kernel.org"
<linux-bluetooth@...r.kernel.org>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>,
Hilda Wu <hildawu@...ltek.com>,
"alex_lu@...lsil.com.cn" <alex_lu@...lsil.com.cn>,
KidmanLee
<kidman@...ltek.com>, Karen Hsu <karenhsu@...ltek.com>
Subject: RE: [PATCH V2 RESEND] Bluetooth: btrtl: Add the support for RTL8922A
Hi! Paul,
Thanks for your feedback.
I just send the V3 to fix auto build error because I did not rebase for the previous patch.
Please check my comment for the questions. Thanks.
> -----Original Message-----
> From: Paul Menzel [mailto:pmenzel@...gen.mpg.de]
> Sent: Tuesday, August 20, 2024 1:37 PM
> To: Max Chou <max.chou@...ltek.com>
> Cc: Marcel Holtmann <marcel@...tmann.org>; Luiz Augusto von Dentz
> <luiz.dentz@...il.com>; linux-bluetooth@...r.kernel.org;
> linux-kernel@...r.kernel.org; Hilda Wu <hildawu@...ltek.com>;
> alex_lu@...lsil.com.cn; KidmanLee <kidman@...ltek.com>; Karen Hsu
> <karenhsu@...ltek.com>
> Subject: Re: [PATCH V2 RESEND] Bluetooth: btrtl: Add the support for
> RTL8922A
>
>
> External mail.
>
>
>
> Dear Max,
>
>
> Thank you for your patch.
>
> Am 20.08.24 um 07:16 schrieb max.chou@...ltek.com:
> > From: Max Chou <max.chou@...ltek.com>
>
There're some different chips in RTL8922A series.
RTL8922AE and RTL8922AU are BT USB I/F, and this patch was committed for that.
RTL8922AE-VR is BT UART I/F.
I think " RTL8922A BT controller on USB interface." is more common.
There is the same description for the past patch as well.
> The article *the* in the commit message summary is uncommon. Maybe:
>
> Add support for RTL8922A
>
> > Add the support for RTL8922A BT controller on USB interface.
>
> Ditto.
>
> > The necessary firmware will be submitted to linux-firmware project.
>
For USB I/F, Realtek assigns the FW filename as rtlXXXXXu_fw.bin.
When this patch is merged, I will submit the FW file to linux-firmware.
> Maybe add the firmware file name `rtl8922au_fw`?
>
> If you could also document the device you tested with, that means which
> has that Bluetooth controller, that might be good to know too.
>
> > The device info from /sys/kernel/debug/usb/devices as below.
> >
> > T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> > D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> > P: Vendor=0bda ProdID=8922 Rev= 0.00
> > S: Manufacturer=Realtek
> > S: Product=Bluetooth Radio
> > S: SerialNumber=00E04C885A01
> > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> >
> > Signed-off-by: Max Chou <max.chou@...ltek.com>
> > ---
> > change:
> > v2: edit commit log
> > ---
> > drivers/bluetooth/btrtl.c | 16 ++++++++++++++++
> > drivers/bluetooth/btusb.c | 13 +++++++++++++
> > 2 files changed, 29 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> > index f2f37143c454..555c2964ec1b 100644
> > --- a/drivers/bluetooth/btrtl.c
> > +++ b/drivers/bluetooth/btrtl.c
> > @@ -30,6 +30,7 @@
> > #define RTL_ROM_LMP_8822B 0x8822
> > #define RTL_ROM_LMP_8852A 0x8852
> > #define RTL_ROM_LMP_8851B 0x8851
> > +#define RTL_ROM_LMP_8922A 0x8922
> > #define RTL_CONFIG_MAGIC 0x8723ab55
> >
> > #define RTL_VSC_OP_COREDUMP 0xfcff
> > @@ -69,6 +70,7 @@ enum btrtl_chip_id {
> > CHIP_ID_8852B = 20,
> > CHIP_ID_8852C = 25,
> > CHIP_ID_8851B = 36,
> > + CHIP_ID_8922A = 44,
> > CHIP_ID_8852BT = 47,
> > };
> >
> > @@ -309,6 +311,15 @@ static const struct id_table ic_id_table[] = {
> > .cfg_name = "rtl_bt/rtl8851bu_config",
> > .hw_info = "rtl8851bu" },
> >
> > + /* 8922A */
> > + { IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB),
> > + .config_needed = false,
> > + .has_rom_version = true,
> > + .has_msft_ext = true,
> > + .fw_name = "rtl_bt/rtl8922au_fw",
> > + .cfg_name = "rtl_bt/rtl8922au_config",
> > + .hw_info = "rtl8922au" },
> > +
>
The chip id is 44 for RTL8922A. I exactly sort it. (between 36 and 47)
> Why not sort it?
>
> > /* 8852BT/8852BE-VT */
> > { IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB),
> > .config_needed = false,
> > @@ -655,6 +666,7 @@ static int rtlbt_parse_firmware(struct hci_dev
> *hdev,
> > { RTL_ROM_LMP_8852A, 20 }, /* 8852B */
> > { RTL_ROM_LMP_8852A, 25 }, /* 8852C */
> > { RTL_ROM_LMP_8851B, 36 }, /* 8851B */
> > + { RTL_ROM_LMP_8922A, 44 }, /* 8922A */
> > { RTL_ROM_LMP_8852A, 47 }, /* 8852BT */
> > };
> >
> > @@ -1255,6 +1267,7 @@ int btrtl_download_firmware(struct hci_dev
> *hdev,
> > case RTL_ROM_LMP_8852A:
> > case RTL_ROM_LMP_8703B:
> > case RTL_ROM_LMP_8851B:
> > + case RTL_ROM_LMP_8922A:
> > err = btrtl_setup_rtl8723b(hdev, btrtl_dev);
> > break;
> > default:
> > @@ -1286,6 +1299,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct
> btrtl_device_info *btrtl_dev)
> > case CHIP_ID_8852B:
> > case CHIP_ID_8852C:
> > case CHIP_ID_8851B:
> > + case CHIP_ID_8922A:
> > case CHIP_ID_8852BT:
>
In rtlbt_parse_firmware(), chip id 44 is between 36(8851B) and 47(8852BT).
Hence, I just followed the sequence here as well.
> Why not sort it?
>
> > set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
> > set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
> > &hdev->quirks); @@ -1529,3 +1543,5 @@
> MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin");
> > MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
> > MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
> > MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
> > +MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin");
> > +MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin");
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index acdba5d77694..8f931cfbac11 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -540,6 +540,8 @@ static const struct usb_device_id quirks_table[] = {
> >
> BTUSB_WIDEBAND_SPEECH },
> > { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK |
> >
> > BTUSB_WIDEBAND_SPEECH },
> > + { USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK |
> > +
> > + BTUSB_WIDEBAND_SPEECH },
>
> Why not sort it?
>
> >
> > /* Realtek 8852BE Bluetooth devices */
> > { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |
> @@
> > -564,6 +566,17 @@ static const struct usb_device_id quirks_table[] = {
> > /* Realtek 8852BT/8852BE-VT Bluetooth devices */
> > { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
> >
> > BTUSB_WIDEBAND_SPEECH },
> > +
> > + /* Realtek 8922AE Bluetooth devices */
> > + { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
> > +
> BTUSB_WIDEBAND_SPEECH },
> > + { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK |
> > +
> BTUSB_WIDEBAND_SPEECH },
> > + { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK |
> > +
> > + BTUSB_WIDEBAND_SPEECH },
>
> Why not sort it?
>
> > + { USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK |
> > +
> > + BTUSB_WIDEBAND_SPEECH },
> > +
> > /* Realtek Bluetooth devices */
> > { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
> > .driver_info = BTUSB_REALTEK },
Powered by blists - more mailing lists