[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZsYXvvhNxmXQAIVo@lizhi-Precision-Tower-5810>
Date: Wed, 21 Aug 2024 12:37:18 -0400
From: Frank Li <Frank.li@....com>
To: Conor Dooley <conor@...nel.org>
Cc: Pavel Machek <pavel@....cz>, Lee Jones <lee@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Dan Murphy <dmurphy@...com>,
"open list:LED SUBSYSTEM" <linux-leds@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>, imx@...ts.linux.dev
Subject: Re: [PATCH v2 1/1] dt-bindings: leds: convert leds-lm3692x to yaml
format
On Wed, Aug 21, 2024 at 04:15:34PM +0100, Conor Dooley wrote:
> On Tue, Aug 20, 2024 at 02:35:43PM -0400, Frank Li wrote:
> > Convert binding doc leds-lm3592x to yaml format.
> > Additional change
> > - Add ref to common.yaml for child node
> > - Add i2c node at example
> >
> > Fix below warning:
> > arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@...us@...00000/i2c@...40000/backlight@36:
> > failed to match any schema with compatible: ['ti,lm36922']
> >
> > Signed-off-by: Frank Li <Frank.Li@....com>
> > diff --git a/Documentation/devicetree/bindings/leds/ti.lm36922.yaml b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> > new file mode 100644
> > index 0000000000000..ac98547b78bd2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
> > @@ -0,0 +1,100 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Texas Instruments - LM3692x Highly Efficient White LED Driver
> > +
> > +maintainers:
> > + - Dan Murphy <dmurphy@...com>
> > +
> > +description: |
> > + The LM3692x is an ultra-compact, highly efficient,
> > + white-LED driver designed for LCD display backlighting.
> > +
> > + The main difference between the LM36922 and LM36923 is the number of
> > + LED strings it supports. The LM36922 supports two strings while the LM36923
> > + supports three strings.
> > +
> > + For more product information please see the link below:
> > + https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - ti,lm36922
> > + - ti,lm36923
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + enable-gpios:
> > + description: gpio pin to enable/disable the device.
>
> I think the description could be replaced with just marking the property
> as "true", both here and for the supply. The descriptions are statements
> of the obvious.
>
> > +
> > + vled-supply:
> > + description: LED supply
> > +
> > + ti,ovp-microvolt:
> > + description: Overvoltage protection.
> > + default: 29000000
> > + enum: [17000000, 21000000, 25000000, 29000000]
> > +
> > +patternProperties:
> > + '^led@[0-9a-f]+$':
>
> There's no need for such a permissive pattern here, since reg is limited
I am confused about it. I think it at least need led@X pattern. Do
you means
'^led@[0-3]+$'
Frank
> to the range 0-3. Additionally, I would add an
> allOf:
> - if:
> properties:
> compatible:
> contains:
> const: ti,lm36922
> then:
> properties:
> led@3: false
>
> or similar to restrict the third entry instead of doing so in prose.
>
> Thanks,
> Conor.
>
> > + type: object
> > + $ref: common.yaml
> > + properties:
> > + reg:
> > + enum: [0, 1, 2, 3]
> > + description: |
> > + 0 - Will enable all LED sync paths
> > + 1 - Will enable the LED1 sync
> > + 2 - Will enable the LED2 sync
> > + 3 - Will enable the LED3 sync (LM36923 only)
> > +
> > + unevaluatedProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - "#address-cells"
> > + - "#size-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + #include <dt-bindings/leds/common.h>
> > +
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + led-controller@36 {
> > + compatible = "ti,lm36922";
> > + reg = <0x36>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> > + vled-supply = <&vbatt>;
> > + ti,ovp-microvolt = <29000000>;
> > +
> > + led@0 {
> > + reg = <0>;
> > + function = LED_FUNCTION_BACKLIGHT;
> > + color = <LED_COLOR_ID_WHITE>;
> > + linux,default-trigger = "backlight";
> > + led-max-microamp = <20000>;
> > + };
> > + };
> > + };
> > +
> > --
> > 2.34.1
> >
Powered by blists - more mailing lists