| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240821082845.11792-5-friday.yang@mediatek.com>
Date: Wed, 21 Aug 2024 16:26:52 +0800
From: friday.yang <friday.yang@...iatek.com>
To: Krzysztof Kozlowski <krzk@...nel.org>, Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Brugger
<matthias.bgg@...il.com>, AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
CC: Yong Wu <yong.wu@...iatek.com>, Philipp Zabel <p.zabel@...gutronix.de>,
Friday Yang <friday.yang@...iatek.com>, <linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: [PATCH 4/4] reset: mediatek: Add reset control driver for SMI
Add a reset-controller driver for performing reset management of
SMI LARBs on MediaTek platform. This driver uses the regmap
frameworks to actually implement the various reset functions
needed when SMI LARBs apply clamp operations.
Signed-off-by: friday.yang <friday.yang@...iatek.com>
---
drivers/reset/Kconfig | 9 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-mediatek-smi.c | 152 +++++++++++++++++++++++++++++
3 files changed, 162 insertions(+)
create mode 100644 drivers/reset/reset-mediatek-smi.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 67bce340a87e..e984a5a332f1 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -154,6 +154,15 @@ config RESET_MESON_AUDIO_ARB
This enables the reset driver for Audio Memory Arbiter of
Amlogic's A113 based SoCs
+config RESET_MTK_SMI
+ bool "MediaTek SMI Reset Driver"
+ depends on MTK_SMI
+ help
+ This option enables the reset controller driver for MediaTek SMI.
+ This reset driver is responsible for managing the reset signals
+ for SMI larbs. Say Y if you want to control reset signals for
+ MediaTek SMI larbs. Otherwise, say N.
+
config RESET_NPCM
bool "NPCM BMC Reset Driver" if COMPILE_TEST
default ARCH_NPCM
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 27b0bbdfcc04..241777485b40 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
+obj-$(CONFIG_RESET_MTK_SMI) += reset-mediatek-smi.o
obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
obj-$(CONFIG_RESET_NUVOTON_MA35D1) += reset-ma35d1.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
diff --git a/drivers/reset/reset-mediatek-smi.c b/drivers/reset/reset-mediatek-smi.c
new file mode 100644
index 000000000000..ead747e80ad5
--- /dev/null
+++ b/drivers/reset/reset-mediatek-smi.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Reset driver for MediaTek SMI module
+ *
+ * Copyright (C) 2024 MediaTek Inc.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/reset/mt8188-resets.h>
+
+#define to_mtk_smi_reset_data(_rcdev) \
+ container_of(_rcdev, struct mtk_smi_reset_data, rcdev)
+
+struct mtk_smi_larb_reset {
+ unsigned int offset;
+ unsigned int value;
+};
+
+static const struct mtk_smi_larb_reset rst_signal_mt8188[] = {
+ [MT8188_SMI_RST_LARB10] = { 0xC, BIT(0) }, /* larb10 */
+ [MT8188_SMI_RST_LARB11A] = { 0xC, BIT(0) }, /* larb11a */
+ [MT8188_SMI_RST_LARB11C] = { 0xC, BIT(0) }, /* larb11c */
+ [MT8188_SMI_RST_LARB12] = { 0xC, BIT(8) }, /* larb12 */
+ [MT8188_SMI_RST_LARB11B] = { 0xC, BIT(0) }, /* larb11b */
+ [MT8188_SMI_RST_LARB15] = { 0xC, BIT(0) }, /* larb15 */
+ [MT8188_SMI_RST_LARB16B] = { 0xA0, BIT(4) }, /* larb16b */
+ [MT8188_SMI_RST_LARB17B] = { 0xA0, BIT(4) }, /* larb17b */
+ [MT8188_SMI_RST_LARB16A] = { 0xA0, BIT(4) }, /* larb16a */
+ [MT8188_SMI_RST_LARB17A] = { 0xA0, BIT(4) }, /* larb17a */
+};
+
+struct mtk_smi_larb_plat {
+ const struct mtk_smi_larb_reset *reset_signal;
+ const unsigned int larb_reset_nr;
+};
+
+struct mtk_smi_reset_data {
+ const struct mtk_smi_larb_plat *larb_plat;
+ struct reset_controller_dev rcdev;
+ struct regmap *regmap;
+};
+
+static const struct mtk_smi_larb_plat mtk_smi_larb_mt8188 = {
+ .reset_signal = rst_signal_mt8188,
+ .larb_reset_nr = ARRAY_SIZE(rst_signal_mt8188),
+};
+
+static int mtk_smi_larb_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct mtk_smi_reset_data *data = to_mtk_smi_reset_data(rcdev);
+ const struct mtk_smi_larb_plat *larb_plat = data->larb_plat;
+ const struct mtk_smi_larb_reset *larb_rst = larb_plat->reset_signal + id;
+ int ret;
+
+ ret = regmap_set_bits(data->regmap, larb_rst->offset, larb_rst->value);
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(data->regmap, larb_rst->offset, larb_rst->value);
+
+ return ret;
+}
+
+static int mtk_smi_larb_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct mtk_smi_reset_data *data = to_mtk_smi_reset_data(rcdev);
+ const struct mtk_smi_larb_plat *larb_plat = data->larb_plat;
+ const struct mtk_smi_larb_reset *larb_rst = larb_plat->reset_signal + id;
+ int ret;
+
+ ret = regmap_set_bits(data->regmap, larb_rst->offset, larb_rst->value);
+ if (ret)
+ dev_err(rcdev->dev, "[%s] Failed to shutdown larb %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int mtk_smi_larb_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct mtk_smi_reset_data *data = to_mtk_smi_reset_data(rcdev);
+ const struct mtk_smi_larb_plat *larb_plat = data->larb_plat;
+ const struct mtk_smi_larb_reset *larb_rst = larb_plat->reset_signal + id;
+ int ret;
+
+ ret = regmap_clear_bits(data->regmap, larb_rst->offset, larb_rst->value);
+ if (ret)
+ dev_err(rcdev->dev, "[%s] Failed to reopen larb %d\n", __func__, ret);
+
+ return ret;
+}
+
+static const struct reset_control_ops mtk_smi_reset_ops = {
+ .reset = mtk_smi_larb_reset,
+ .assert = mtk_smi_larb_reset_assert,
+ .deassert = mtk_smi_larb_reset_deassert,
+};
+
+static int mtk_smi_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct mtk_smi_larb_plat *larb_plat = of_device_get_match_data(dev);
+ struct device_node *np = dev->of_node, *reset_node;
+ struct mtk_smi_reset_data *data;
+ struct regmap *regmap;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ reset_node = of_parse_phandle(np, "mediatek,larb-rst-syscon", 0);
+ if (!reset_node)
+ return -EINVAL;
+
+ regmap = device_node_to_regmap(reset_node);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ data->larb_plat = larb_plat;
+ data->regmap = regmap;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.ops = &mtk_smi_reset_ops;
+ data->rcdev.of_node = np;
+ data->rcdev.nr_resets = larb_plat->larb_reset_nr;
+ data->rcdev.dev = dev;
+ platform_set_drvdata(pdev, data);
+
+ return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct of_device_id mtk_smi_larb_reset_of_match[] = {
+ { .compatible = "mediatek,smi-reset-mt8188", .data = &mtk_smi_larb_mt8188 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mtk_smi_larb_reset_of_match);
+
+static struct platform_driver mtk_smi_reset_driver = {
+ .probe = mtk_smi_reset_probe,
+ .driver = {
+ .name = "mediatek-smi-reset",
+ .of_match_table = mtk_smi_larb_reset_of_match,
+ },
+};
+module_platform_driver(mtk_smi_reset_driver);
+
+MODULE_AUTHOR("Friday.Yang@...iatek.com");
+MODULE_DESCRIPTION("MediaTek SMI Reset Driver");
+MODULE_LICENSE("GPL");
--
2.46.0
Powered by blists - more mailing lists