[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<TY3PR01MB1134676C8A4FE7BBC89E13701868F2@TY3PR01MB11346.jpnprd01.prod.outlook.com>
Date: Thu, 22 Aug 2024 14:21:23 +0000
From: Biju Das <biju.das.jz@...renesas.com>
To: Rong Qianfeng <rongqianfeng@...o.com>, Wolfram Sang
<wsa+renesas@...g-engineering.com>, Andi Shyti <andi.shyti@...nel.org>, Paul
Cercueil <paul@...pouillou.net>, "linux-renesas-soc@...r.kernel.org"
<linux-renesas-soc@...r.kernel.org>, "linux-i2c@...r.kernel.org"
<linux-i2c@...r.kernel.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-mips@...r.kernel.org"
<linux-mips@...r.kernel.org>
CC: "opensource.kernel@...o.com" <opensource.kernel@...o.com>
Subject: RE: [PATCH v2 3/3] i2c: jz4780: Use devm_clk_get_enabled() helpers
Hi Rong Qianfeng,
Thanks for the patch
> -----Original Message-----
> From: Rong Qianfeng <rongqianfeng@...o.com>
> Sent: Thursday, August 22, 2024 3:04 PM
> Subject: [PATCH v2 3/3] i2c: jz4780: Use devm_clk_get_enabled() helpers
>
> The devm_clk_get_enabled() helpers:
> - call devm_clk_get()
> - call clk_prepare_enable() and register what is needed in order to
> call clk_disable_unprepare() when needed, as a managed resource.
>
> This simplifies the code and avoids the calls to clk_disable_unprepare().
>
> While at it, no more special handling needed here, remove the goto label "err:".
>
> Signed-off-by: Rong Qianfeng <rongqianfeng@...o.com>
> Acked-by: Paul Cercueil <paul@...pouillou.net>
> ---
> drivers/i2c/busses/i2c-jz4780.c | 21 ++++++---------------
> 1 file changed, 6 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c index
> 4aafdfab6305..f5362c5dfb50 100644
> --- a/drivers/i2c/busses/i2c-jz4780.c
> +++ b/drivers/i2c/busses/i2c-jz4780.c
> @@ -792,26 +792,22 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, i2c);
>
> - i2c->clk = devm_clk_get(&pdev->dev, NULL);
> + i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
> if (IS_ERR(i2c->clk))
> return PTR_ERR(i2c->clk);
>
> - ret = clk_prepare_enable(i2c->clk);
> - if (ret)
> - return ret;
> -
> ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
> &clk_freq);
> if (ret) {
> dev_err(&pdev->dev, "clock-frequency not specified in DT\n");
> - goto err;
> + return ret;
Nitpick:
Leaving it to you.
If needed, you could send another patch to use dev_err_probe
if (ret)
return dev_err_probe(&pdev->dev, ret, "clock-frequency not specified in DT\n");
> }
>
> i2c->speed = clk_freq / 1000;
> if (i2c->speed == 0) {
> ret = -EINVAL;
> dev_err(&pdev->dev, "clock-frequency minimum is 1000\n");
return dev_err_probe(&pdev->dev, -EINVAL, "clock-frequency minimum is 1000\n ");
Cheers,
Biju
> - goto err;
> + return ret;
> }
> jz4780_i2c_set_speed(i2c);
>
> @@ -827,29 +823,24 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
>
> ret = platform_get_irq(pdev, 0);
> if (ret < 0)
> - goto err;
> + return ret;
> i2c->irq = ret;
> ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
> dev_name(&pdev->dev), i2c);
> if (ret)
> - goto err;
> + return ret;
>
> ret = i2c_add_adapter(&i2c->adap);
> if (ret < 0)
> - goto err;
> + return ret;
>
> return 0;
> -
> -err:
> - clk_disable_unprepare(i2c->clk);
> - return ret;
> }
>
> static void jz4780_i2c_remove(struct platform_device *pdev) {
> struct jz4780_i2c *i2c = platform_get_drvdata(pdev);
>
> - clk_disable_unprepare(i2c->clk);
> i2c_del_adapter(&i2c->adap);
> }
>
> --
> 2.39.0
Powered by blists - more mailing lists