lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240822152801.602318-8-claudiu.beznea.uj@bp.renesas.com>
Date: Thu, 22 Aug 2024 18:27:52 +0300
From: Claudiu <claudiu.beznea@...on.dev>
To: vkoul@...nel.org,
	kishon@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	p.zabel@...gutronix.de,
	geert+renesas@...der.be,
	magnus.damm@...il.com,
	gregkh@...uxfoundation.org,
	mturquette@...libre.com,
	sboyd@...nel.org,
	yoshihiro.shimoda.uh@...esas.com,
	biju.das.jz@...renesas.com,
	ulf.hansson@...aro.org
Cc: linux-phy@...ts.infradead.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-renesas-soc@...r.kernel.org,
	linux-usb@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-clk@...r.kernel.org,
	linux-pm@...r.kernel.org,
	claudiu.beznea@...on.dev,
	Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array

From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>

Before accessing the USB area of the RZ/G3S SoC the PWRRDY bit of the
SYS_USB_PWRRDY register need to be cleared. When USB area is not used the
PWRRDY bit of the SYS_USB_PWRRDY register need to be set. This register is
in the SYSC controller address space and the assert/de-assert of the
signal handled by SYSC_USB_PWRRDY was implemented as a reset signal.

The USB modules available on the RZ/G3S SoC that need this bit set are:
- USB ch0 (supporting host and peripheral mode)
- USB ch2 (supporting host mode)
- USBPHY control

As the USBPHY control is the root device for all the other USB channels
(USB ch0, USB ch1) add support to set the PWRRDY for the USB area when
initializing the USBPHY control. As this is done though reset signals
get the reset array in the USBPHY control driver.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
---
 drivers/reset/reset-rzg2l-usbphy-ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
index 1cd157f4f03b..8b64c12f3bec 100644
--- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -132,7 +132,7 @@ static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	priv->rstc = devm_reset_control_array_get_exclusive(&pdev->dev);
 	if (IS_ERR(priv->rstc))
 		return dev_err_probe(dev, PTR_ERR(priv->rstc),
 				     "failed to get reset\n");
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ