lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c26c0761-def7-48a1-973d-2c918689902d@ti.com>
Date: Thu, 22 Aug 2024 17:42:54 +0530
From: "Anwar, Md Danish" <a0501179@...com>
To: Roger Quadros <rogerq@...nel.org>, MD Danish Anwar <danishanwar@...com>,
        Dan Carpenter <dan.carpenter@...aro.org>, Andrew Lunn <andrew@...n.ch>,
        Jan
 Kiszka <jan.kiszka@...mens.com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Javier Carrasco <javier.carrasco.cruz@...il.com>,
        Jacob Keller
	<jacob.e.keller@...el.com>,
        Diogo Ivo <diogo.ivo@...mens.com>, Simon Horman
	<horms@...nel.org>,
        Richard Cochran <richardcochran@...il.com>,
        Paolo Abeni
	<pabeni@...hat.com>, Jakub Kicinski <kuba@...nel.org>,
        Eric Dumazet
	<edumazet@...gle.com>,
        "David S. Miller" <davem@...emloft.net>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <srk@...com>
Subject: Re: [PATCH net-next v2 1/7] net: ti: icssg-prueth: Enable IEP1



On 8/22/2024 4:57 PM, Roger Quadros wrote:
> 
> 
> On 22/08/2024 08:52, MD Danish Anwar wrote:
>>
>>
>> On 21/08/24 5:23 pm, Roger Quadros wrote:
>>>
>>>
>>> On 21/08/2024 14:33, Anwar, Md Danish wrote:
>>>> Hi Roger,
>>>>
>>>> On 8/21/2024 4:57 PM, Roger Quadros wrote:
>>>>> Hi,
>>>>>
>>>>> On 13/08/2024 10:42, MD Danish Anwar wrote:
>>>>>> IEP1 is needed by firmware to enable FDB learning and FDB ageing.
>>>>>
>>>>> Required by which firmware?
>>>>>
>>>>
>>>> IEP1 is needed by all ICSSG firmwares (Dual EMAC / Switch / HSR)
>>>>
>>>>> Does dual-emac firmware need this?
>>>>>
>>>>
>>>> Yes, Dual EMAC firmware needs IEP1 to enabled.
>>>
>>> Then this need to be a bug fix?
>>
>> Correct, this is in fact a bug. But IEP1 is also needed by HSR firmware
>> so I thought of keeping this patch with HSR series. As HSR will be
>> completely broken if IEP1 is not enabled.
>>
>> I didn't want to post two patches one as bug fix to net and one part of
>> HSR to net-next thus I thought of keeping this patch in this series only.
> 
> Bug fixes need to be posted earlier as they can get accepted sooner and
> even back-ported to stable. You also need to add the Fixes tag.
> 

Yes I understand that. The problem was I will need to send the patch
twice once as bug fix to net/main, once as part of this series to
net-next/main and drop it from this series once the patch gets merged to
net and is synced to net-next. Since I cannot post this series without
this patch as the HSR feature will get broken.

Or I need to post this to net/main and wait for it to be part of
net-next and then only I can re-post this series. So to avoid all these
I thought of only posting it as part of this series. This is not a major
bug and it will be okay from feature perspective if this bug gets merged
via net-next.

What do you suggest now? Should I post the bug fix to net/main and post
this seires without this patch or wait for the bug fix to sync then only
post this series?

>>
>>> What is the impact if IEP1 is not enabled for dual emac.
>>>
>>
>> Without IEP1 enabled, Crash is seen on AM64x 10M link when connecting /
>> disconnecting multiple times. On AM65x IEP1 was always enabled because
> 
> In that ase you need to enable quirk_10m_link_issue for AM64x platform.

Correct. But since for all ICSSG supported platform quirk_10m_link_issue
 needs to be enabled. Which in turn will enable IEP1. I think it's
better enable IEP1 directly without any condition.

IEP1 is also needed for Switch and HSR firmwares so I thought directly
enabling it instead of enabling it inside the if check
`prueth->pdata.quirk_10m_link_issue` would be better idea.

What do you suggest here? Will setting `quirk_10m_link_issue` as true
for AM64x will be a better approach or always enabling IEP1 without any
if check will be better approach for this?

> I understand that IEP1 is not required for 100M/1G.
> 
>> `prueth->pdata.quirk_10m_link_issue` was true. FDB learning and FDB
>> ageing will also get impacted if IEP1 is not enabled.
> 
> Is FDB learning and ageing involved in dual Emac mode?
> 

Yes FDB learning and ageing is involved in dual EMAC mode as well.

>>
>>>>
>>>>>> Always enable IEP1
>>>>>>
>>>>>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>>>>>> ---
>>>
>>
> 

-- 
Thanks and Regards,
Md Danish Anwar

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ