linux-kernel - [PATCH v5 0/5] Verify devices transition from D3cold to D0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240823154023.360234-1-superm1@kernel.org>
Date: Fri, 23 Aug 2024 10:40:18 -0500
From: Mario Limonciello <superm1@...nel.org>
To: Bjorn Helgaas <bhelgaas@...gle.com>,
	Mathias Nyman <mathias.nyman@...el.com>,
	Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc: "open list : PCI SUBSYSTEM" <linux-pci@...r.kernel.org>,
	open list <linux-kernel@...r.kernel.org>,
	"open list : USB XHCI DRIVER" <linux-usb@...r.kernel.org>,
	Daniel Drake <drake@...lessos.org>,
	Gary Li <Gary.Li@....com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
	Mario Limonciello <mario.limonciello@....com>
Subject: [PATCH v5 0/5] Verify devices transition from D3cold to D0

From: Mario Limonciello <mario.limonciello@....com>

Gary has reported that when a dock is plugged into a system at the same
time the autosuspend delay has tripped that the USB4 stack malfunctions.

Messages show up like this:

```
thunderbolt 0000:e5:00.6: ring_interrupt_active: interrupt for TX ring 0 is already enabled
```

Furthermore the USB4 router is non-functional at this point.

Those messages happen because the device is still in D3cold at the time
that the PCI core handed control back to the USB4 connection manager
(thunderbolt).

The issue is that it takes time for a device to enter D3cold and do a
conventional reset, and then more time for it to exit D3cold.

This appears not to be a new problem; previously there were very similar
reports from Ryzen XHCI controllers.  Quirks were added for those.
Furthermore; adding extra logging it's apparent that other PCI devices
in the system can take more than 10ms to recover from D3cold as well.

This series add a wait into pci_power_up() specifically for D3cold exit and
then drops the quirks that were previously used for the Ryzen XHCI controllers.

Mario Limonciello (5):
  PCI: Use an enum for reset type in pci_dev_wait()
  PCI: Check PCI_PM_CTRL instead of PCI_COMMAND in pci_dev_wait()
  PCI: Verify functions currently in D3cold have entered D0
  PCI: Allow Ryzen XHCI controllers into D3cold and drop delays
  PCI: Drop Radeon quirk for Macbook Pro 8.2

 drivers/pci/pci-driver.c    |  2 +-
 drivers/pci/pci.c           | 70 +++++++++++++++++++++++++++----------
 drivers/pci/pci.h           | 13 ++++++-
 drivers/pci/pcie/dpc.c      |  2 +-
 drivers/pci/quirks.c        | 25 -------------
 drivers/usb/host/xhci-pci.c | 11 ------
 6 files changed, 66 insertions(+), 57 deletions(-)

-- 
2.43.0