[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0d8b1322-cf15-4ed9-b958-06516bbb64c7@tuxon.dev>
Date: Fri, 23 Aug 2024 10:54:06 +0300
From: claudiu beznea <claudiu.beznea@...on.dev>
To: Conor Dooley <conor@...nel.org>
Cc: vkoul@...nel.org, kishon@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, p.zabel@...gutronix.de, geert+renesas@...der.be,
magnus.damm@...il.com, gregkh@...uxfoundation.org, mturquette@...libre.com,
sboyd@...nel.org, yoshihiro.shimoda.uh@...esas.com,
biju.das.jz@...renesas.com, ulf.hansson@...aro.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-usb@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-pm@...r.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add
#reset-cells for RZ/G3S
Hi, Conor,
On 22.08.2024 19:42, Conor Dooley wrote:
> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>
>> The RZ/G3S System controller has registers to control signals that need
>> to be de-asserted/asserted before/after different SoC areas are power
>> on/off. This signals are implemented as reset signals. For this document
>> the #reset-cells property.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>> ---
>> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
>> index 4386b2c3fa4d..6b0bb34485d9 100644
>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
>> @@ -42,12 +42,28 @@ properties:
>> - const: cm33stbyr_int
>> - const: ca55_deny
>>
>> + "#reset-cells":
>> + const: 1
>> +
>> required:
>> - compatible
>> - reg
>>
>> additionalProperties: false
>>
>> +allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: renesas,r9a08g045-sysc
>> + then:
>> + required:
>> + - "#reset-cells"
>
> Given this is new required property on an existing platform, I'd expect
> some mention of why it used to be okay to not have this but is now
> required. Did firmware or a bootloader stage take things out of reset?
On previous SoCs the SYS controller has no support for controlling the
signals going to different peripherals (USB, PCIE in case of RZ/G3S).
I'll add a note about this on next version.
Thank you,
Claudiu Beznea
>
>> + else:
>> + properties:
>> + "#reset-cells": false
>> +
>> examples:
>> - |
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> --
>> 2.39.2
>>
Powered by blists - more mailing lists