[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <52bee8b1-1d42-441d-ba90-b7d6eb9163b8@csgroup.eu>
Date: Fri, 23 Aug 2024 10:12:12 +0200
From: Christophe Leroy <christophe.leroy@...roup.eu>
To: Herve Codina <herve.codina@...tlin.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Qiang Zhao <qiang.zhao@....com>,
Li Yang <leoyang.li@....com>, Mark Brown <broonie@...nel.org>
Cc: linuxppc-dev@...ts.ozlabs.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v2 27/36] soc: fsl: cpm1: qmc: Introduce
qmc_{init,exit}_xcc() and their CPM1 version
Le 08/08/2024 à 09:11, Herve Codina a écrit :
> Current code handles the CPM1 version of QMC and initialize the QMC used
> SCC. The QUICC Engine (QE) version uses an UCC (Unified Communication
> Controllers) instead of the SCC (Serial Communication Controllers) used
> in the CPM1 version. These controllers serve the same purpose and are
> used in the same way but their inializations are slightly different.
>
> In order to prepare the support for QE version of QMC, introduce
> qmc_init_xcc() to initialize theses controllers (UCC in QE and SCC in
> CPM1) and isolate the CPM1 specific SCC initialization in a specific
> function.
>
> Also introduce qmc_exit_xcc() for consistency to revert operations done
> in qmc_init_xcc().
>
> Signed-off-by: Herve Codina <herve.codina@...tlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@...roup.eu>
> ---
> drivers/soc/fsl/qe/qmc.c | 66 +++++++++++++++++++++++++++-------------
> 1 file changed, 45 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
> index eacc7dd2be53..b95227378f97 100644
> --- a/drivers/soc/fsl/qe/qmc.c
> +++ b/drivers/soc/fsl/qe/qmc.c
> @@ -1621,6 +1621,41 @@ static int qmc_init_resources(struct qmc *qmc, struct platform_device *pdev)
> return qmc_cpm1_init_resources(qmc, pdev);
> }
>
> +static int qmc_cpm1_init_scc(struct qmc *qmc)
> +{
> + u32 val;
> + int ret;
> +
> + /* Connect the serial (SCC) to TSA */
> + ret = tsa_serial_connect(qmc->tsa_serial);
> + if (ret)
> + return dev_err_probe(qmc->dev, ret, "Failed to connect TSA serial\n");
> +
> + /* Init GMSR_H and GMSR_L registers */
> + val = SCC_GSMRH_CDS | SCC_GSMRH_CTSS | SCC_GSMRH_CDP | SCC_GSMRH_CTSP;
> + qmc_write32(qmc->scc_regs + SCC_GSMRH, val);
> +
> + /* enable QMC mode */
> + qmc_write32(qmc->scc_regs + SCC_GSMRL, SCC_GSMRL_MODE_QMC);
> +
> + /* Disable and clear interrupts */
> + qmc_write16(qmc->scc_regs + SCC_SCCM, 0x0000);
> + qmc_write16(qmc->scc_regs + SCC_SCCE, 0x000F);
> +
> + return 0;
> +}
> +
> +static int qmc_init_xcc(struct qmc *qmc)
> +{
> + return qmc_cpm1_init_scc(qmc);
> +}
> +
> +static void qmc_exit_xcc(struct qmc *qmc)
> +{
> + /* Disconnect the serial from TSA */
> + tsa_serial_disconnect(qmc->tsa_serial);
> +}
> +
> static int qmc_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> @@ -1711,29 +1746,18 @@ static int qmc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - /* Connect the serial (SCC) to TSA */
> - ret = tsa_serial_connect(qmc->tsa_serial);
> - if (ret) {
> - dev_err(qmc->dev, "Failed to connect TSA serial\n");
> + /* Init SCC */
> + ret = qmc_init_xcc(qmc);
> + if (ret)
> return ret;
> - }
>
> - /* Init GMSR_H and GMSR_L registers */
> - qmc_write32(qmc->scc_regs + SCC_GSMRH,
> - SCC_GSMRH_CDS | SCC_GSMRH_CTSS | SCC_GSMRH_CDP | SCC_GSMRH_CTSP);
> -
> - /* enable QMC mode */
> - qmc_write32(qmc->scc_regs + SCC_GSMRL, SCC_GSMRL_MODE_QMC);
> -
> - /* Disable and clear interrupts, set the irq handler */
> - qmc_write16(qmc->scc_regs + SCC_SCCM, 0x0000);
> - qmc_write16(qmc->scc_regs + SCC_SCCE, 0x000F);
> + /* Set the irq handler */
> irq = platform_get_irq(pdev, 0);
> if (irq < 0)
> - goto err_tsa_serial_disconnect;
> + goto err_exit_xcc;
> ret = devm_request_irq(qmc->dev, irq, qmc_irq_handler, 0, "qmc", qmc);
> if (ret < 0)
> - goto err_tsa_serial_disconnect;
> + goto err_exit_xcc;
>
> /* Enable interrupts */
> qmc_write16(qmc->scc_regs + SCC_SCCM,
> @@ -1761,8 +1785,8 @@ static int qmc_probe(struct platform_device *pdev)
> err_disable_intr:
> qmc_write16(qmc->scc_regs + SCC_SCCM, 0);
>
> -err_tsa_serial_disconnect:
> - tsa_serial_disconnect(qmc->tsa_serial);
> +err_exit_xcc:
> + qmc_exit_xcc(qmc);
> return ret;
> }
>
> @@ -1776,8 +1800,8 @@ static void qmc_remove(struct platform_device *pdev)
> /* Disable interrupts */
> qmc_write16(qmc->scc_regs + SCC_SCCM, 0);
>
> - /* Disconnect the serial from TSA */
> - tsa_serial_disconnect(qmc->tsa_serial);
> + /* Exit SCC */
> + qmc_exit_xcc(qmc);
> }
>
> static const struct qmc_data qmc_data_cpm1 = {
Powered by blists - more mailing lists