lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGXv+5HtjWi60OnMrjR3fnO3T=7uyMazr1aKBFjuPmWuE9NK6g@mail.gmail.com>
Date: Fri, 23 Aug 2024 16:40:36 +0800
From: Chen-Yu Tsai <wenst@...omium.org>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Rob Herring <robh@...nel.org>, Saravana Kannan <saravanak@...gle.com>, 
	Matthias Brugger <matthias.bgg@...il.com>, 
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, Wolfram Sang <wsa@...nel.org>, 
	Benson Leung <bleung@...omium.org>, Tzung-Bi Shih <tzungbi@...nel.org>, 
	Mark Brown <broonie@...nel.org>, Liam Girdwood <lgirdwood@...il.com>, 
	chrome-platform@...ts.linux.dev, devicetree@...r.kernel.org, 
	linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org, 
	linux-kernel@...r.kernel.org, Douglas Anderson <dianders@...omium.org>, 
	Johan Hovold <johan@...nel.org>, Jiri Kosina <jikos@...nel.org>, linux-i2c@...r.kernel.org
Subject: Re: [PATCH v5 06/10] i2c: Introduce OF component probe function

On Thu, Aug 22, 2024 at 10:02 PM Andy Shevchenko
<andriy.shevchenko@...ux.intel.com> wrote:
>
> On Thu, Aug 22, 2024 at 05:19:59PM +0800, Chen-Yu Tsai wrote:
> > Some devices are designed and manufactured with some components having
> > multiple drop-in replacement options. These components are often
> > connected to the mainboard via ribbon cables, having the same signals
> > and pin assignments across all options. These may include the display
> > panel and touchscreen on laptops and tablets, and the trackpad on
> > laptops. Sometimes which component option is used in a particular device
> > can be detected by some firmware provided identifier, other times that
> > information is not available, and the kernel has to try to probe each
> > device.
> >
> > This change attempts to make the "probe each device" case cleaner. The
> > current approach is to have all options added and enabled in the device
> > tree. The kernel would then bind each device and run each driver's probe
> > function. This works, but has been broken before due to the introduction
> > of asynchronous probing, causing multiple instances requesting "shared"
> > resources, such as pinmuxes, GPIO pins, interrupt lines, at the same
> > time, with only one instance succeeding. Work arounds for these include
> > moving the pinmux to the parent I2C controller, using GPIO hogs or
> > pinmux settings to keep the GPIO pins in some fixed configuration, and
> > requesting the interrupt line very late. Such configurations can be seen
> > on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based
> > Lenovo Thinkpad 13S.
> >
> > Instead of this delicate dance between drivers and device tree quirks,
> > this change introduces a simple I2C component probe. function For a
> > given class of devices on the same I2C bus, it will go through all of
> > them, doing a simple I2C read transfer and see which one of them responds.
> > It will then enable the device that responds.
> >
> > This requires some minor modifications in the existing device tree. The
> > status for all the device nodes for the component options must be set
> > to "failed-needs-probe". This makes it clear that some mechanism is
> > needed to enable one of them, and also prevents the prober and device
> > drivers running at the same time.
>
> ...
>
> > --- a/drivers/i2c/Makefile
> > +++ b/drivers/i2c/Makefile
> > @@ -9,6 +9,7 @@ i2c-core-objs                         := i2c-core-base.o i2c-core-smbus.o
> >  i2c-core-$(CONFIG_ACPI)              += i2c-core-acpi.o
> >  i2c-core-$(CONFIG_I2C_SLAVE)         += i2c-core-slave.o
> >  i2c-core-$(CONFIG_OF)                += i2c-core-of.o
> > +i2c-core-$(CONFIG_OF_DYNAMIC)        += i2c-core-of-prober.o
>
> Seems like all the above (except ACPI) have the same issue, i.e. TABs/spaces
> mixture.

I was lazy and just copied the previous line. I'll fix the new line for now.

> ...
>
> > +     ret = of_changeset_apply(ocs);
> > +     if (!ret) {
>
> Why not positive conditional?

No real reason. I suppose having the error condition come first is more
common. Not sure if it makes any difference in this case though?


Thanks
ChenYu


> > +             /*
> > +              * ocs is intentionally kept around as it needs to
> > +              * exist as long as the change is applied.
> > +              */
> > +             void *ptr __always_unused = no_free_ptr(ocs);
> > +     } else {
> > +             /* ocs needs to be explicitly cleaned up before being freed. */
> > +             of_changeset_destroy(ocs);
> > +     }
>
> --
> With Best Regards,
> Andy Shevchenko
>
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ