| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<TY3PR01MB11346FBA77256F2156D374ECF86882@TY3PR01MB11346.jpnprd01.prod.outlook.com>
Date: Fri, 23 Aug 2024 09:01:00 +0000
From: Biju Das <biju.das.jz@...renesas.com>
To: Claudiu.Beznea <claudiu.beznea@...on.dev>, "vkoul@...nel.org"
<vkoul@...nel.org>, "kishon@...nel.org" <kishon@...nel.org>,
"robh@...nel.org" <robh@...nel.org>, "krzk+dt@...nel.org"
<krzk+dt@...nel.org>, "conor+dt@...nel.org" <conor+dt@...nel.org>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>, "geert+renesas@...der.be"
<geert+renesas@...der.be>, "magnus.damm@...il.com" <magnus.damm@...il.com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"mturquette@...libre.com" <mturquette@...libre.com>, "sboyd@...nel.org"
<sboyd@...nel.org>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>
CC: "linux-phy@...ts.infradead.org" <linux-phy@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-renesas-soc@...r.kernel.org" <linux-renesas-soc@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-clk@...r.kernel.org"
<linux-clk@...r.kernel.org>, "linux-pm@...r.kernel.org"
<linux-pm@...r.kernel.org>, Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: RE: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to
initialize the bus
Hi Claudiu,
> -----Original Message-----
> From: claudiu beznea <claudiu.beznea@...on.dev>
> Sent: Friday, August 23, 2024 9:58 AM
-
> clk@...r.kernel.org; linux-pm@...r.kernel.org; Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> Subject: Re: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
>
> Hi, Biju,
>
> On 23.08.2024 10:35, Biju Das wrote:
> > Hi Claudiu,
> >
> >> -----Original Message-----
> >> From: Claudiu <claudiu.beznea@...on.dev>
> >> Sent: Thursday, August 22, 2024 4:28 PM
> >> Subject: [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to
> >> initialize the bus
> >>
> >> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> >>
> >> The Renesas RZ/G3S need to initialize the USB BUS before transferring data due to hardware
> limitation.
> >> As the register that need to be touched for this is in the address
> >> space of the USB PHY, and the UBS PHY need to be initialized before
> >> any other USB drivers handling data transfer, add support to initialize the USB BUS.
> >>
> >> As the USB PHY is probed before any other USB drivers that enables
> >> clocks and de-assert the reset signals and the BUS initialization is
> >> done in the probe phase, we need to add code to de-assert reset signal and runtime resume the
> device (which enables its clocks) before accessing the registers.
> >>
> >> As the reset signals are not required by the USB PHY driver for the
> >> other USB PHY hardware variants, the reset signals and runtime PM was handled only in the function
> that initialize the USB BUS.
> >>
> >> The PHY initialization was done right after runtime PM enable to have
> >> all in place when the PHYs are registered.
> >
> > There is no user for this patch. The first user is RZ/G3S and you
> > should merge this patch with next one.
>
> I think this is a matter of taste... This is how I usually format the patches (for scenarios like
> this) and got no request for squashing.
That is strange for trivial patches like this.
Cheers,
Biju
> >
> >>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> >> ---
> >> drivers/phy/renesas/phy-rcar-gen3-usb2.c | 50
> >> ++++++++++++++++++++++--
> >> 1 file changed, 47 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> >> b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> >> index 7594f64eb737..cf4299cea579 100644
> >> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> >> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> >> @@ -19,12 +19,14 @@
> >> #include <linux/platform_device.h>
> >> #include <linux/pm_runtime.h>
> >> #include <linux/regulator/consumer.h>
> >> +#include <linux/reset.h>
> >> #include <linux/string.h>
> >> #include <linux/usb/of.h>
> >> #include <linux/workqueue.h>
> >>
> >> /******* USB2.0 Host registers (original offset is +0x200) *******/
> >> #define USB2_INT_ENABLE 0x000
> >> +#define USB2_AHB_BUS_CTR 0x008
> >> #define USB2_USBCTR 0x00c
> >> #define USB2_SPD_RSM_TIMSET 0x10c
> >> #define USB2_OC_TIMSET 0x110
> >> @@ -40,6 +42,10 @@
> >> #define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */
> >> #define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */
> >>
> >> +/* AHB_BUS_CTR */
> >> +#define USB2_AHB_BUS_CTR_MBL_MASK GENMASK(1, 0)
> >> +#define USB2_AHB_BUS_CTR_MBL_INCR4 2
> >> +
> >> /* USBCTR */
> >> #define USB2_USBCTR_DIRPD BIT(2)
> >> #define USB2_USBCTR_PLL_RST BIT(1)
> >> @@ -111,6 +117,7 @@ struct rcar_gen3_chan {
> >> struct extcon_dev *extcon;
> >> struct rcar_gen3_phy rphys[NUM_OF_PHYS];
> >> struct regulator *vbus;
> >> + struct reset_control *rstc;
> >> struct work_struct work;
> >> struct mutex lock; /* protects rphys[...].powered */
> >> enum usb_dr_mode dr_mode;
> >> @@ -125,6 +132,7 @@ struct rcar_gen3_chan { struct rcar_gen3_phy_drv_data {
> >> const struct phy_ops *phy_usb2_ops;
> >> bool no_adp_ctrl;
> >> + bool init_bus;
> >> };
> >>
> >> /*
> >> @@ -650,6 +658,35 @@ static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
> >> return candidate;
> >> }
> >>
> >> +static int rcar_gen3_phy_usb2_init_bus(struct rcar_gen3_chan
> >> +*channel) {
> >> + struct device *dev = channel->dev;
> >> + int ret;
> >> + u32 val;
> >> +
> >> + channel->rstc = devm_reset_control_array_get_shared(dev);
> >> + if (IS_ERR(channel->rstc))
> >> + return PTR_ERR(channel->rstc);
> >> +
> >> + ret = pm_runtime_resume_and_get(dev);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + ret = reset_control_deassert(channel->rstc);
> >> + if (ret)
> >> + goto rpm_put;
> >> +
> >> + val = readl(channel->base + USB2_AHB_BUS_CTR);
> >> + val &= ~USB2_AHB_BUS_CTR_MBL_MASK;
> >> + val |= USB2_AHB_BUS_CTR_MBL_INCR4;
> >> + writel(val, channel->base + USB2_AHB_BUS_CTR);
> >> +
> >> +rpm_put:
> >> + pm_runtime_put(dev);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) {
> >> const struct rcar_gen3_phy_drv_data *phy_data; @@ -703,6 +740,15 @@
> >> static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
> >> goto error;
> >> }
> >>
> >> + platform_set_drvdata(pdev, channel);
> >> + channel->dev = dev;
> >> +
> >> + if (phy_data->init_bus) {
> >> + ret = rcar_gen3_phy_usb2_init_bus(channel);
> >> + if (ret)
> >> + goto error;
> >> + }
> >> +
> >> channel->soc_no_adp_ctrl = phy_data->no_adp_ctrl;
> >> if (phy_data->no_adp_ctrl)
> >> channel->obint_enable_bits = USB2_OBINT_IDCHG_EN; @@ -733,9 +779,6
> >> @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
> >> channel->vbus = NULL;
> >> }
> >>
> >> - platform_set_drvdata(pdev, channel);
> >> - channel->dev = dev;
> >> -
> >> provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
> >> if (IS_ERR(provider)) {
> >> dev_err(dev, "Failed to register PHY provider\n"); @@ -762,6
> >> +805,7 @@ static void rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
> >> if (channel->is_otg_channel)
> >> device_remove_file(&pdev->dev, &dev_attr_role);
> >>
> >> + reset_control_assert(channel->rstc);
> >> pm_runtime_disable(&pdev->dev);
> >> };
> >>
> >> --
> >> 2.39.2
> >
Powered by blists - more mailing lists