| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5a91ea63-2229-4c21-8caa-ca0912b1b8da@linaro.org>
Date: Sat, 24 Aug 2024 16:19:05 +0300
From: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
To: Depeng Shao <quic_depengs@...cinc.com>, rfoss@...nel.org,
todor.too@...il.com, bryan.odonoghue@...aro.org, mchehab@...nel.org,
robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org
Cc: linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
kernel@...cinc.com, Yongsheng Li <quic_yon@...cinc.com>
Subject: Re: [PATCH 12/13] media: qcom: camss: Add CSID Gen3 support for
sm8550
On 8/12/24 17:41, Depeng Shao wrote:
> The CSID in sm8550 is gen3, it has new register offset and new
> functionality. The buf done irq,register update and reset are
> moved to CSID gen3.
>
> The sm8550 also has a new block is named as CSID top, CSID can
> connect to VFE or SFE(Sensor Front End), the connection is controlled
> by CSID top.
>
> Co-developed-by: Yongsheng Li <quic_yon@...cinc.com>
> Signed-off-by: Yongsheng Li <quic_yon@...cinc.com>
> Signed-off-by: Depeng Shao <quic_depengs@...cinc.com>
> ---
> drivers/media/platform/qcom/camss/Makefile | 1 +
> .../platform/qcom/camss/camss-csid-gen3.c | 339 ++++++++++++++++++
> .../platform/qcom/camss/camss-csid-gen3.h | 26 ++
> .../media/platform/qcom/camss/camss-csid.c | 46 ++-
> .../media/platform/qcom/camss/camss-csid.h | 10 +
> drivers/media/platform/qcom/camss/camss.c | 91 +++++
> drivers/media/platform/qcom/camss/camss.h | 2 +
> 7 files changed, 503 insertions(+), 12 deletions(-)
> create mode 100644 drivers/media/platform/qcom/camss/camss-csid-gen3.c
> create mode 100644 drivers/media/platform/qcom/camss/camss-csid-gen3.h
>
> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
> index e636968a1126..c336e4c1a399 100644
> --- a/drivers/media/platform/qcom/camss/Makefile
> +++ b/drivers/media/platform/qcom/camss/Makefile
> @@ -7,6 +7,7 @@ qcom-camss-objs += \
> camss-csid-4-1.o \
> camss-csid-4-7.o \
> camss-csid-gen2.o \
> + camss-csid-gen3.o \
> camss-csiphy-2ph-1-0.o \
> camss-csiphy-3ph-1-0.o \
> camss-csiphy.o \
> diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen3.c b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
> new file mode 100644
> index 000000000000..d96bc126f0a9
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
> @@ -0,0 +1,339 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * camss-csid-gen3.c
> + *
> + * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
> + *
> + * Copyright (c) 2024 Qualcomm Technologies, Inc.
> + */
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +
> +#include "camss.h"
> +#include "camss-csid.h"
> +#include "camss-csid-gen3.h"
> +
> +#define CSID_TOP_IO_PATH_CFG0(csid) (0x4 * (csid))
> +#define OUTPUT_IFE_EN 0x100
> +#define INTERNAL_CSID 1
> +
> +#define CSID_RST_CFG 0xC
> +#define RST_MODE 0
> +#define RST_LOCATION 4
> +
> +#define CSID_RST_CMD 0x10
> +#define SELECT_HW_RST 0
> +#define SELECT_SW_RST 1
> +#define SELECT_IRQ_RST 2
> +
> +#define CSID_CSI2_RX_IRQ_STATUS 0x9C
> +#define CSID_CSI2_RX_IRQ_MASK 0xA0
> +#define CSID_CSI2_RX_IRQ_CLEAR 0xA4
> +#define CSID_CSI2_RX_IRQ_SET 0xA8
> +
> +#define CSID_CSI2_RDIN_IRQ_STATUS(rdi) (0xEC + 0x10 * (rdi))
> +
> +#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi) (0xF4 + 0x10 * (rdi))
> +#define CSID_CSI2_RDIN_IRQ_SET(rdi) (0xF8 + 0x10 * (rdi))
> +
> +#define CSID_TOP_IRQ_STATUS 0x7C
The list of macros shall be sorted by register offset value.
> +#define TOP_IRQ_STATUS_RESET_DONE 0
> +
> +#define CSID_TOP_IRQ_MASK 0x80
> +#define CSID_TOP_IRQ_CLEAR 0x84
> +#define CSID_TOP_IRQ_SET 0x88
> +
> +#define CSID_IRQ_CMD 0x14
> +#define IRQ_CMD_CLEAR 0
> +#define IRQ_CMD_SET 4
> +
> +#define CSID_REG_UPDATE_CMD 0x18
> +
> +#define CSID_BUF_DONE_IRQ_STATUS 0x8C
> +#define BUF_DONE_IRQ_STATUS_RDI_OFFSET (csid_is_lite(csid) ? 1 : 14)
> +#define CSID_BUF_DONE_IRQ_MASK 0x90
> +#define CSID_BUF_DONE_IRQ_CLEAR 0x94
> +#define CSID_BUF_DONE_IRQ_SET 0x98
> +
> +#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
> +
> +#define CSID_CSI2_RX_CFG0 0x200
> +#define CSI2_RX_CFG0_NUM_ACTIVE_LANES 0
> +#define CSI2_RX_CFG0_DL0_INPUT_SEL 4
> +#define CSI2_RX_CFG0_PHY_NUM_SEL 20
> +
> +#define CSID_CSI2_RX_CFG1 0x204
> +#define CSI2_RX_CFG1_ECC_CORRECTION_EN 0
> +#define CSI2_RX_CFG1_VC_MODE 2
> +
> +#define CSID_RDI_CFG0(rdi) (0x500 + 0x100 * (rdi))
> +#define RDI_CFG0_TIMESTAMP_EN 6
> +#define RDI_CFG0_TIMESTAMP_STB_SEL 8
> +#define RDI_CFG0_DECODE_FORMAT 12
> +#define RDI_CFG0_DT 16
> +#define RDI_CFG0_VC 22
> +#define RDI_CFG0_DT_ID 27
> +#define RDI_CFG0_EN 31
> +
> +#define CSID_RDI_CFG1(rdi) (0x510 + 0x100 * (rdi))
> +#define RDI_CFG1_DROP_H_EN 5
> +#define RDI_CFG1_DROP_V_EN 6
> +#define RDI_CFG1_CROP_H_EN 7
> +#define RDI_CFG1_CROP_V_EN 8
> +#define RDI_CFG1_PIX_STORE 10
> +#define RDI_CFG1_PACKING_FORMAT 15
> +
> +#define CSID_RDI_CTRL(rdi) (0x504 + 0x100 * (rdi))
Sorted by register offset please.
> +#define RDI_CTRL_START_CMD 0
> +
> +#define CSID_RDI_IRQ_SUBSAMPLE_PATTERN(rdi) (0x548 + 0x100 * (rdi))
> +#define CSID_RDI_IRQ_SUBSAMPLE_PERIOD(rdi) (0x54C + 0x100 * (rdi))
> +
> +static inline int reg_update_rdi(struct csid_device *csid, int n)
> +{
> + return BIT(n + 4) + BIT(20 + n);
Taking as unshifted bit BIT(4) is RUP and BIT(20) is AUP, add
corresponding macros for them, then
return (... | ...) << n;
> +}
> +#define REG_UPDATE_RDI reg_update_rdi
> +
--
Best wishes,
Vladimir
Powered by blists - more mailing lists