[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240825142509.201943-1-amadeus@jmu.edu.cn>
Date: Sun, 25 Aug 2024 22:25:09 +0800
From: Chukun Pan <amadeus@....edu.cn>
To: detlev.casanova@...labora.com
Cc: airlied@...il.com,
alchark@...il.com,
amadeus@....edu.cn,
andi.shyti@...nel.org,
andyshrk@....com,
broonie@...nel.org,
cl@...k-chips.com,
conor+dt@...nel.org,
daniel@...ll.ch,
devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
dsimic@...jaro.org,
efectn@...tonmail.com,
finley.xiao@...k-chips.com,
gregkh@...uxfoundation.org,
heiko@...ech.de,
honyuenkwun@...il.com,
jagan@...eble.ai,
jamie@...ieiles.com,
jic23@...nel.org,
jirislaby@...nel.org,
jonas@...boo.se,
jszhang@...nel.org,
kernel@...labora.com,
krzk+dt@...nel.org,
lars@...afoo.de,
lee@...nel.org,
linux-arm-kernel@...ts.infradead.org,
linux-i2c@...r.kernel.org,
linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
linux-serial@...r.kernel.org,
linux-spi@...r.kernel.org,
linux-watchdog@...r.kernel.org,
linux@...ck-us.net,
maarten.lankhorst@...ux.intel.com,
macromorgan@...mail.com,
megi@....cz,
michael.riesch@...fvision.net,
mripard@...nel.org,
robh@...nel.org,
tim@...thertop.org,
tzimmermann@...e.de,
ulf.hansson@...aro.org,
wim@...ux-watchdog.org
Subject: Re: [PATCH v2 12/12] arm64: dts: rockchip: Add rk3576-armsom-sige5 board
Hi,
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
> ...
> + leds: leds {
> + compatible = "gpio-leds";
Maybe there should be a blank line.
> + work_led: work-led {
> + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
Is the color missing?
> ...
> + vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_3v3_rtc_s5";
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_5v0_sys>;
> + };
Missing blank line.
> + vcc_1v8_s0: regulator-vcc-1v8-s0 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_1v8_s0";
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc_1v8_s3>;
> + };
> ...
> +&gmac0 {
> + phy-mode = "rgmii-rxid";
Can we use "rgmii-id" and remove tx_delay here?
> ...
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> + max-frequency = <200000000>;
> + no-sdio;
> + no-mmc;
> + non-removable;
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc_3v3_s3>;
Indentation error.
> + vqmmc-supply = <&vccio_sd_s0>;
> + status = "okay";
> +};
> ...
Thanks,
Chukun
--
2.25.1
Powered by blists - more mailing lists