| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0d0d69b9-6c46-4d7b-9ae7-2a8970f89555@molgen.mpg.de> Date: Mon, 26 Aug 2024 14:05:17 +0200 From: Paul Menzel <pmenzel@...gen.mpg.de> To: Jarkko Nikula <jarkko.nikula@...ux.intel.com> Cc: linux-i2c@...r.kernel.org, LKML <linux-kernel@...r.kernel.org> Subject: Re: irq/51-DLL075B:01 in D state without touchpad usage, interrupts increase Dear Jarkko, Sorry for the late reply. Am 23.02.24 um 11:09 schrieb Jarkko Nikula: > On 2/22/24 17:59, Paul Menzel wrote: >> Am 22.02.24 um 16:16 schrieb Jarkko Nikula: >> >>> On 2/20/24 18:15, Paul Menzel wrote: >> >>>> On a Dell XPS 13 9360 with Debian sid/unstable and Linux 6.8-rc4+ >>>> (and probably before), I sometimes notice the fan spinning up, and >>>> trying to figure out why, I noticed that `top` showed `irq/51- >>>> DLL075B:01` in state D (uninterruptible sleep (usually IO)). That is >>>> without using the touchpad. I am using an external USB keyboard and >>>> an external USB mouse. >>>> >>>> >>>> $ sudo dmesg | grep -e "DMI:" -e "Linux version" -e microcode >>>> [ 0.000000] Linux version 6.8.0-rc4+ (build@...emianrhapsody.molgen.mpg.de) (gcc (Debian 13.2.0-13) 13.2.0, GNU ld (GNU Binutils for Debian) 2.42) #25 SMP PREEMPT_DYNAMIC Sat Feb 17 05:39:03 CET 2024 >>>> [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022 >>>> [ 0.367292] microcode: Current revision: 0x000000f4 >>>> [ 0.367293] microcode: Updated early from: 0x000000f0 >>>> >>>> $ sudo dmesg | grep DLL075B >>>> [ 0.967975] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2 >>>> [ 0.968302] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3 >>>> [ 0.968569] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 >>>> [ 19.753775] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input17 >>>> [ 19.753950] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input18 >>>> [ 19.754654] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 >>>> >>>> From `top`: >>>> >>>> 206 root -51 0 0 0 0 D 1,7 0,0 8:45.46 irq/51-DLL075B:01 >>>> >>>> $ ps aux | grep 'irq/51' >>>> root 206 0.2 0.0 0 0 ? D Feb17 12:11 [irq/51-DLL075B:01] >>>> >>>> The interrupts increase though by around 610 per second (without >>>> using the device): >>>> >>>> $ for i in $(seq 1 10); do LANG= date; sudo grep -e '17:' -e '51:' /proc/interrupts; sleep 1; done >>>> Tue Feb 20 17:04:23 CET 2024 >>>> 17: 1631256120 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25255617 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:27 CET 2024 >>>> 17: 1631295844 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25256229 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:28 CET 2024 >>>> 17: 1631335618 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25256843 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:29 CET 2024 >>>> 17: 1631375224 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25257454 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:30 CET 2024 >>>> 17: 1631415636 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25258076 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:31 CET 2024 >>>> 17: 1631455174 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25258687 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:32 CET 2024 >>>> 17: 1631494990 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25259300 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:33 CET 2024 >>>> 17: 1631534944 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25259915 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:34 CET 2024 >>>> 17: 1631574647 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25260527 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> Tue Feb 20 17:04:35 CET 2024 >>>> 17: 1631613552 0 0 6452384 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 >>>> 51: 25261130 109943 0 0 IR-IO-APIC 51-fasteoi DLL075B:01 >>>> >>>> The D state increases the load average. >>>> >>>> Is that the expected behavior? >>> >>> No this is not. Touchpad appears to be firing interrupt line 51 >>> continuously and then drivers/hid/i2c-hid/i2c-hid-core.c: >>> i2c_hid_irq() is trying to read input from touchpad over I2C bus. >>> >>> Not sure is this HW failure or system FW error (there are bad ACPI >>> tables out there misconfiguring things etc). >> >> It normally works, and I have no idea, if this even contributed to the >> laggy system. Right now, the interrupts do not increase when *not* >> using the touchpad or touchscreen. > > Ah, so it triggers randomly? Often I only notice it after resuming from ACPI S3 with an USB-C multi-port adapter connected, so not using the touchpad at all. > When it happens does the situation remain or does it recover back to > normal somehow, e.g. after touching the touchpad, unloading and > loading the i2c_hid[_acpi] module, suspend/ resume cycle, etc? After touching the touchpad, the interrupt storm stops. >> If it helps, the output of `acpidump` is attached to the (unrelated) >> Linux Kernel Bugzilla issue *Linux warning `usb: port power management >> may be unreliable` on Dell XPS 13 9360* [1]. >> >> Do you have a suggestion, what I can do next time, this happens? > > I'd try to see is it possible to recover back to normal or is reboot > required. That might give ideas what might trigger the situation. > >> Could Linux detect this situation and log something? >> > Don't know. Perhaps difficult to differentiate from normal touchpad use. Interrupt 17 seems to be fired almost 40.000 times per second. Could this be an indicator? Kind regards, Paul
Powered by blists - more mailing lists