[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAK+PMK62crXQurf1R3vQ=4mtC3pLCKUjA3Vw-qZggcK2ucdrBQ@mail.gmail.com>
Date: Tue, 27 Aug 2024 09:48:39 -0600
From: Jett Rink <jettrink@...omium.org>
To: LKML <linux-kernel@...r.kernel.org>
Cc: linux-security-module@...r.kernel.org, Jarkko Sakkinen <jarkko@...nel.org>,
Jason Gunthorpe <jgg@...pe.ca>, Peter Huewe <peterhuewe@....de>, linux-integrity@...r.kernel.org
Subject: Re: [PATCH v5] tpm: Add new device/vendor ID 0x50666666
I just wanted to follow up to ensure this patch got accepted. Is there
anything else I need to do?
-Jett
On Tue, Aug 6, 2024 at 10:51 AM Jett Rink <jettrink@...omium.org> wrote:
>
> Accept another DID:VID for the next generation Google TPM. This TPM
> has the same Ti50 firmware and fulfills the same interface.
>
> Suggested-by: Jarkko Sakkinen <jarkko@...nel.org>
> Signed-off-by: Jett Rink <jettrink@...omium.org>
> ---
>
> Changes in v5:
> Correct Suggested-by tag form.
>
> Changes in v4:
> Add Suggested-by tag. Sorry that I forget.
>
> Changes in v3:
> Refactor ternary operators into helper method.
>
> Changes in v2:
> Patchset 2 applies cleanly
>
> drivers/char/tpm/tpm_tis_i2c_cr50.c | 30 ++++++++++++++++++++++++++---
> 1 file changed, 27 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> index adf22992138e..1f83cfe2724c 100644
> --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> @@ -31,7 +31,8 @@
> #define TPM_CR50_TIMEOUT_SHORT_MS 2 /* Short timeout during transactions */
> #define TPM_CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */
> #define TPM_CR50_I2C_DID_VID 0x00281ae0L /* Device and vendor ID reg value */
> -#define TPM_TI50_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> +#define TPM_TI50_DT_I2C_DID_VID 0x504a6666L /* Device and vendor ID reg value */
> +#define TPM_TI50_OT_I2C_DID_VID 0x50666666L /* Device and vendor ID reg value */
> #define TPM_CR50_I2C_MAX_RETRIES 3 /* Max retries due to I2C errors */
> #define TPM_CR50_I2C_RETRY_DELAY_LO 55 /* Min usecs between retries on I2C */
> #define TPM_CR50_I2C_RETRY_DELAY_HI 65 /* Max usecs between retries on I2C */
> @@ -668,6 +669,27 @@ static const struct of_device_id of_cr50_i2c_match[] = {
> MODULE_DEVICE_TABLE(of, of_cr50_i2c_match);
> #endif
>
> +/**
> + * tpm_cr50_vid_to_name() - Maps VID to name.
> + * @vendor: Vendor identifier to map to name
> + *
> + * Return:
> + * A valid string for the vendor or empty string
> + */
> +static const char *tpm_cr50_vid_to_name(u32 vendor)
> +{
> + switch (vendor) {
> + case TPM_CR50_I2C_DID_VID:
> + return "cr50";
> + case TPM_TI50_DT_I2C_DID_VID:
> + return "ti50 DT";
> + case TPM_TI50_OT_I2C_DID_VID:
> + return "ti50 OT";
> + default:
> + return "";
> + }
> +}
> +
> /**
> * tpm_cr50_i2c_probe() - Driver probe function.
> * @client: I2C client information.
> @@ -741,14 +763,16 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
> }
>
> vendor = le32_to_cpup((__le32 *)buf);
> - if (vendor != TPM_CR50_I2C_DID_VID && vendor != TPM_TI50_I2C_DID_VID) {
> + if (vendor != TPM_CR50_I2C_DID_VID &&
> + vendor != TPM_TI50_DT_I2C_DID_VID &&
> + vendor != TPM_TI50_OT_I2C_DID_VID) {
> dev_err(dev, "Vendor ID did not match! ID was %08x\n", vendor);
> tpm_cr50_release_locality(chip, true);
> return -ENODEV;
> }
>
> dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> - vendor == TPM_TI50_I2C_DID_VID ? "ti50" : "cr50",
> + tpm_cr50_vid_to_name(vendor),
> client->addr, client->irq, vendor >> 16);
> return tpm_chip_register(chip);
> }
> --
> 2.46.0.rc2.264.g509ed76dc8-goog
>
Powered by blists - more mailing lists