[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <0c7f2c8d68408e39c28e3e81addce09cc0ee3969.1724800328.git.quic_nguyenb@quicinc.com>
Date: Tue, 27 Aug 2024 16:14:13 -0700
From: "Bao D. Nguyen" <quic_nguyenb@...cinc.com>
To: <quic_cang@...cinc.com>, <quic_nitirawa@...cinc.com>, <bvanassche@....org>,
<avri.altman@....com>, <peter.wang@...iatek.com>,
<manivannan.sadhasivam@...aro.org>, <adrian.hunter@...el.com>,
<martin.petersen@...cle.com>
CC: <linux-scsi@...r.kernel.org>, "Bao D. Nguyen" <quic_nguyenb@...cinc.com>,
Alim Akhtar <alim.akhtar@...sung.com>,
"James E.J. Bottomley"
<jejb@...ux.ibm.com>,
Bean Huo <beanhuo@...ron.com>, ChanWoo Lee
<cw9316.lee@...sung.com>,
Maramaina Naresh <quic_mnaresh@...cinc.com>,
"open
list" <linux-kernel@...r.kernel.org>
Subject: [PATCH v1 1/1] scsi: ufs: core: Remove ufshcd_urgent_bkops()
The ufshcd_urgent_bkops() is a wrapper function.
It only calls the ufshcd_bkops_ctrl(). Remove it to
simplify the ufs core driver. Replace any references
to ufshcd_urgent_bkops() with ufshcd_bkops_ctrl().
In addition, remove the second parameter in the
ufshcd_bkops_ctrl() because the information can be
retrieved from the first parameter.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@...cinc.com>
---
drivers/ufs/core/ufshcd.c | 32 +++++++-------------------------
1 file changed, 7 insertions(+), 25 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 21429ee..a52c95b 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5895,12 +5895,11 @@ static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status)
/**
* ufshcd_bkops_ctrl - control the auto bkops based on current bkops status
* @hba: per-adapter instance
- * @status: bkops_status value
*
* Read the bkops_status from the UFS device and Enable fBackgroundOpsEn
* flag in the device to permit background operations if the device
- * bkops_status is greater than or equal to "status" argument passed to
- * this function, disable otherwise.
+ * bkops_status is greater than or equal to the "hba->urgent_bkops_lvl",
+ * disable otherwise.
*
* Return: 0 for success, non-zero in case of failure.
*
@@ -5908,11 +5907,11 @@ static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status)
* to know whether auto bkops is enabled or disabled after this function
* returns control to it.
*/
-static int ufshcd_bkops_ctrl(struct ufs_hba *hba,
- enum bkops_status status)
+static int ufshcd_bkops_ctrl(struct ufs_hba *hba)
{
- int err;
+ enum bkops_status status = hba->urgent_bkops_lvl;
u32 curr_status = 0;
+ int err;
err = ufshcd_get_bkops_status(hba, &curr_status);
if (err) {
@@ -5934,23 +5933,6 @@ static int ufshcd_bkops_ctrl(struct ufs_hba *hba,
return err;
}
-/**
- * ufshcd_urgent_bkops - handle urgent bkops exception event
- * @hba: per-adapter instance
- *
- * Enable fBackgroundOpsEn flag in the device to permit background
- * operations.
- *
- * If BKOPs is enabled, this function returns 0, 1 if the bkops in not enabled
- * and negative error value for any other failure.
- *
- * Return: 0 upon success; < 0 upon failure.
- */
-static int ufshcd_urgent_bkops(struct ufs_hba *hba)
-{
- return ufshcd_bkops_ctrl(hba, hba->urgent_bkops_lvl);
-}
-
static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status)
{
return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
@@ -9801,7 +9783,7 @@ static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
* allow background operations if bkops status shows
* that performance might be impacted.
*/
- ret = ufshcd_urgent_bkops(hba);
+ ret = ufshcd_bkops_ctrl(hba);
if (ret) {
/*
* If return err in suspend flow, IO will hang.
@@ -9990,7 +9972,7 @@ static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
* If BKOPs operations are urgently needed at this moment then
* keep auto-bkops enabled or else disable it.
*/
- ufshcd_urgent_bkops(hba);
+ ufshcd_bkops_ctrl(hba);
if (hba->ee_usr_mask)
ufshcd_write_ee_control(hba);
--
2.7.4
Powered by blists - more mailing lists