[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <6b147080-cd58-4430-a17c-4de4e29f1348@ti.com>
Date: Tue, 27 Aug 2024 14:18:24 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: Nishanth Menon <nm@...com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] arm64: dts: ti: k3-j722s-evm: Describe main_uart5
On 24/08/24 11:44 pm, Nishanth Menon wrote:
> On 11:05-20240822, Bhavya Kapoor wrote:
>> main_uart5 in J722S platform is used by the firmware. Thus,
> what platform? what firmware?
Hey Nishanth, it is used by system firmware for its logs
in J722S-EVM.
>
>> describe it for completeness, adding the pinmux and mark
>> it as reserved.
>>
>> Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
>> ---
>> arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>> index 24e9f2ea509b..5addf1c0afc2 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>> @@ -20,6 +20,7 @@ / {
>> aliases {
>> serial0 = &wkup_uart0;
>> serial2 = &main_uart0;
>> + serial3 = &main_uart5;
>> mmc0 = &sdhci0;
>> mmc1 = &sdhci1;
>> };
>> @@ -211,6 +212,13 @@ J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */
>> bootph-all;
>> };
>>
>> + main_uart5_pins_default: main-uart5-default-pins {
>> + pinctrl-single,pins = <
>> + J722S_IOPAD(0x0108, PIN_INPUT, 3) /* (J27) UART5_RXD */
>> + J722S_IOPAD(0x010c, PIN_OUTPUT, 3) /* (H27) UART5_TXD */
>> + >;
>> + };
>> +
>> vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
>> pinctrl-single,pins = <
>> J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */
>> @@ -330,6 +338,12 @@ &main_uart0 {
>> bootph-all;
>> };
>>
>> +&main_uart5 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&main_uart5_pins_default>;
> Document specifically why reserved.
Will send out v2 for this.
>
>> + status = "reserved";
>> +};
>> +
>> &mcu_pmx0 {
>>
>> mcu_mcan0_pins_default: mcu-mcan0-default-pins {
>> --
>> 2.34.1
>>
Powered by blists - more mailing lists