lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cecf4ff63f440b41fda3b7302be8ccc4e39436e1.camel@ew.tq-group.com>
Date: Tue, 27 Aug 2024 11:26:36 +0200
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: Logan Bristol <logan.bristol@...xas.edu>, Krzysztof Kozlowski
 <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Vignesh
 Raghavendra <vigneshr@...com>, Nishanth Menon <nm@...com>
Cc: Josua Mayer <josua@...id-run.com>, Matt McKee <mmckee@...tec.com>, Wadim
 Egorov <w.egorov@...tec.de>, linux@...tq-group.com,
 devicetree@...r.kernel.org,  linux-kernel@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2] arm64: dts: ti: k3-am64* Disable ethernet by default
 at SoC level

On Fri, 2024-08-09 at 08:57 -0500, Logan Bristol wrote:
> 
> External interfaces should be disabled at the SoC DTSI level, since
> the node is incomplete. Disable Ethernet switch and ports in SoC DTSI 
> and enable them in the board DTS. If the board DTS includes a SoM DTSI 
> that completes the node description, enable the Ethernet switch and ports 
> in SoM DTSI.
> 
> Reflect this change in SoM DTSIs by removing ethernet port disable.
> 
> Signed-off-by: Logan Bristol <logan.bristol@...xas.edu>

For the TQMa64xxL:

Acked-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>


> ---
> Changes since v1:
> - Enabled cpsw3g and cpsw_port1 in SoM DTSI instead of board DTS
> if board DTS included SoM DTSI
> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi               | 3 +++
>  arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi        | 6 ++----
>  arch/arm64/boot/dts/ti/k3-am642-evm.dts                | 3 +++
>  arch/arm64/boot/dts/ti/k3-am642-sk.dts                 | 3 +++
>  arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi            | 6 ++----
>  arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 6 ++----
>  6 files changed, 15 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index f8370dd03350..69c5af58b727 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -677,6 +677,7 @@ cpsw3g: ethernet@...0000 {
>  		assigned-clock-parents = <&k3_clks 13 9>;
>  		clock-names = "fck";
>  		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
>  
>  		dmas = <&main_pktdma 0xC500 15>,
>  		       <&main_pktdma 0xC501 15>,
> @@ -701,6 +702,7 @@ cpsw_port1: port@1 {
>  				phys = <&phy_gmii_sel 1>;
>  				mac-address = [00 00 00 00 00 00];
>  				ti,syscon-efuse = <&main_conf 0x200>;
> +				status = "disabled";
>  			};
>  
>  			cpsw_port2: port@2 {
> @@ -709,6 +711,7 @@ cpsw_port2: port@2 {
>  				label = "port2";
>  				phys = <&phy_gmii_sel 2>;
>  				mac-address = [00 00 00 00 00 00];
> +				status = "disabled";
>  			};
>  		};
>  
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> index ea7c58fb67e2..6bece2fb4e95 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> @@ -185,6 +185,7 @@ AM64X_IOPAD(0x0278, PIN_INPUT, 7)	/* (C19) EXTINTn.GPIO1_70 */
>  &cpsw3g {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&cpsw_rgmii1_pins_default>;
> +	status = "okay";
>  };
>  
>  &cpsw3g_mdio {
> @@ -208,10 +209,7 @@ cpsw3g_phy1: ethernet-phy@1 {
>  &cpsw_port1 {
>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&cpsw3g_phy1>;
> -};
> -
> -&cpsw_port2 {
> -	status = "disabled";
> +	status = "okay";
>  };
>  
>  &mailbox0_cluster2 {
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index 6bb1ad2e56ec..82da21bd9aea 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -616,17 +616,20 @@ &cpsw3g {
>  	bootph-all;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
> +	status = "okay";
>  };
>  
>  &cpsw_port1 {
>  	bootph-all;
>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&cpsw3g_phy0>;
> +	status = "okay";
>  };
>  
>  &cpsw_port2 {
>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&cpsw3g_phy3>;
> +	status = "okay";
>  };
>  
>  &cpsw3g_mdio {
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index 44ecbcf1c844..86369525259c 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -527,16 +527,19 @@ &usb0 {
>  &cpsw3g {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
> +	status = "okay";
>  };
>  
>  &cpsw_port1 {
>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&cpsw3g_phy0>;
> +	status = "okay";
>  };
>  
>  &cpsw_port2 {
>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&cpsw3g_phy1>;
> +	status = "okay";
>  };
>  
>  &cpsw3g_mdio {
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> index c19d0b8bbf0f..a5cec9a07510 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> @@ -177,6 +177,7 @@ vdd_mmc0: regulator-vdd-mmc0 {
>  &cpsw3g {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&rgmii1_default_pins>;
> +	status = "okay";
>  };
>  
>  &cpsw3g_mdio {
> @@ -210,10 +211,7 @@ ethernet_phy0: ethernet-phy@0 {
>  &cpsw_port1 {
>  	phy-mode = "rgmii-id";
>  	phy-handle = <&ethernet_phy0>;
> -};
> -
> -&cpsw_port2 {
> -	status = "disabled";
> +	status = "okay";
>  };
>  
>  &icssg1_mdio {
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
> index c40ad67cee01..8d7a0283c391 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
> @@ -119,15 +119,13 @@ reg_sd: regulator-sd {
>  &cpsw3g {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&cpsw_pins>;
> +	status = "okay";
>  };
>  
>  &cpsw_port1 {
>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&cpsw3g_phy0>;
> -};
> -
> -&cpsw_port2 {
> -	status = "disabled";
> +	status = "okay";
>  };
>  
>  &cpsw3g_mdio {

-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ