| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFrX=PxHCrGX-NFLk57dH0AVY3foMKN+K7TSyaLwA_TVdg@mail.gmail.com> Date: Wed, 28 Aug 2024 16:36:03 +0200 From: Ulf Hansson <ulf.hansson@...aro.org> To: Victor Shih <victorshihgli@...il.com> Cc: Adrian Hunter <adrian.hunter@...el.com>, linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org, benchuanggli@...il.com, Lucas.Lai@...esyslogic.com.tw, HL.Liu@...esyslogic.com.tw, Greg.tu@...esyslogic.com.tw, takahiro.akashi@...aro.org, dlunev@...omium.org, Victor Shih <victor.shih@...esyslogic.com.tw> Subject: Re: [PATCH V18 00/22] Add support UHS-II for GL9755 and GL9767 On Tue, 27 Aug 2024 at 12:20, Victor Shih <victorshihgli@...il.com> wrote: > > Hi, Ulf > > Sorry for bothering you again and again. > I'm not sure if I'm missing something, or if there are any steps I > need to complete first. > I hope to get your opinions on this series of patches, > so that this series of patches can move forward to the next step. > Please help review this series of patches and let me know if there are > any that need to be modified. > I look forward to your reply. > > Thanks, Victor Shih Hi Victor, Basically I have been prioritizing my review bandwidth. I have already spent a lot of time reviewing and helping to move this series forward, but I am simply worried that I will be wasting bandwidth if/when I am looking into this again. That said, I will await for you to send another new version to address Adrian's final comments for the sdhci parts. Then I will try to review it one more time. Kind regards Uffe > > On Fri, Aug 23, 2024 at 8:45 PM Adrian Hunter <adrian.hunter@...el.com> wrote: > > > > On 22/08/24 17:58, Victor Shih wrote: > > > Hi, Ulf and Adrian > > > > > > Sorry for bothering you again, May I know the status of this series of patches? > > > Please help review this series of patches and let me know if there are > > > any that need to be modified. > > > I look forward to your reply. > > > > I noticed a few small things and replied to the relevent > > emails, but, as I wrote for V17, this is essentially OK from > > my point of view. > > > > Hi, Adrian > > Thank you for your feedback, I will correct it in the next version. > > Thanks, Victor Shih > > > > > > > Thanks, Victor Shih > > > > > > On Thu, Aug 15, 2024 at 6:26 PM Victor Shih <victorshihgli@...il.com> wrote: > > >> > > >> Hi, Ulf > > >> > > >> Sorry for bothering you. > > >> Please help review this series of patches. > > >> I hope to get your feedback to confirm whether there are any needs to > > >> be modified. > > >> If you already have a closer look at a paragraph in the series, could > > >> you let me know your opinions first. > > >> I look forward to your reply. > > >> > > >> Thanks, Victor Shih > > >> > > >> Hi, Adrian > > >> > > >> Please help review this series of patches. > > >> In this series of patches, I only patch#17 file and patch#22. > > >> I look forward to receiving your reply. > > >> > > >> Thanks, Victor Shih > > >> > > >> On Fri, Aug 2, 2024 at 6:22 PM Victor Shih <victorshihgli@...il.com> wrote: > > >>> > > >>> From: Victor Shih <victor.shih@...esyslogic.com.tw> > > >>> > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 and GL9767 > > >>> UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#7: for core > > >>> patch#8-#20: for sdhci > > >>> patch#21: for GL9755 > > >>> patch#22: for GL9767 > > >>> > > >>> Tests > > >>> ===== > > >>> Ran 'dd' command to evaluate the performance: > > >>> (SanDisk UHS-II card on GL9755 controller) > > >>> Read Write > > >>> UHS-II disabled (UHS-I): 83.9MB/s 48.6MB/s > > >>> UHS-II enabled : 199MB/s 74.3MB/s > > >>> (SanDisk UHS-II card on GL9767 controller) > > >>> Read Write > > >>> UHS-II disabled (UHS-I): 83.6MB/s 50.1MB/s > > >>> UHS-II enabled : 183MB/s 77.8MB/s > > >>> > > >>> Changes in v18 (August. 02, 2024) > > >>> * Rebase on latest mmc/next. > > >>> * Patch#17: Modify the judgment condition in sdhci_uhs2_reset_cmd_data() > > >>> and replace it from mmc_card_uhs2() > > >>> to host->mmc->uhs2_sd_tran flag. > > >>> * Patch#22: Add new register settings for gl9767. > > >>> Add card_event in the sdhci_ops for gl9767. > > >>> Add sdhci_gl9767_set_card_detect_debounce_time() > > >>> to configure the gl9767. > > >>> Adjust the sdhci_gl9767_reset() process for gl9767. > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240620104444.5862-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v17 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 and GL9767 > > >>> UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#7: for core > > >>> patch#8-#20: for sdhci > > >>> patch#21: for GL9755 > > >>> patch#22: for GL9767 > > >>> > > >>> Changes in v17 (June. 20, 2024) > > >>> * Rebase on latest mmc/next. > > >>> * Drop patch#8 of uhs2 patches series v16. > > >>> * Patch#11: Move the sdhci_uhs2_reset_cmd_data() to the other patch > > >>> it was used for the first time. > > >>> * Patch#12: Export sdhci_uhs2_set_power() function. > > >>> * Patch#16: Add new parameter to __sdhci_finish_data_common(). > > >>> * Patch#17: Add sdhci_uhs2_reset_cmd_data() and sdhci_uhs2_needs_reset() to > > >>> resolve the data error or cmd error. > > >>> * Patch#21: Rname gl9755_overcurrent_event_enable() to > > >>> sdhci_gli_overcurrent_event_enable(). > > >>> * Patch#22: Use mmc_card_uhs2() to simplify the code in the > > >>> sdhci_gl9767_reset(). > > >>> Use mmc_card_uhs2() to simplify the code in the > > >>> sdhci_gl9767_set_power(). > > >>> Add sdhci_gli_overcurrent_event_enable() to > > >>> sdhci_gl9767_set_power(). > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240522110909.10060-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v16 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 and GL9767 > > >>> UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#8: for core > > >>> patch#9-#21: for sdhci > > >>> patch#22: for GL9755 > > >>> patch#23: for GL9767 > > >>> > > >>> Changes in v16 (May. 22, 2024) > > >>> * rebased to the linux-kernel-v6.9.0-rc2 in Ulf Hansson next branch. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V14 00/21] Add support UHS-II for GL9755. > > >>> * Patch#8: Separate the Error Recovery mechanism from patch#7 to patch#8. > > >>> * Patch#16: Remove irrelevant definition in the sdhci_calc_timeout_uhs2(). > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240123062827.8525-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v15 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 and GL9767 > > >>> UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#7: for core > > >>> patch#8-#20: for sdhci > > >>> patch#21: for GL9755 > > >>> patch#22: for GL9767 > > >>> > > >>> Changes in v15 (April. 22, 2024) > > >>> * rebased to the linux-kernel-v6.9.0-rc2 in Ulf Hansson next branch. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V14 00/21] Add support UHS-II for GL9755. > > >>> * Patch#07: Move struct uhs2_command uhs2_cmd to struct mmc_request and > > >>> modify whatever other changers to make it work. > > >>> Refer the SD Host Controller Standard Specification > > >>> Section 3.10 to add Error Recovery mechanism to recover > > >>> the command error. > > >>> * Patch#11: Refer the SD Host Controller Standard Specification > > >>> Section 3.10 to add reset command data mechanism. > > >>> * Patch#15: Resolve merge conflicts and reduce unnecessary line breaks. > > >>> * Patch#16: Adjust the parameters used in the __sdhci_uhs2_finish_command() > > >>> to match changes in the Patch#7. > > >>> * Patch#21: Adjust gl9755_vendor_init() to the correct function. > > >>> * Patch#22: Add gl9767 to support uhs2 function. > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20240123062827.8525-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v14 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#7: for core > > >>> patch#8-#20: for sdhci > > >>> patch#21: for GL9755 > > >>> > > >>> Changes in v14 (January. 23, 2024) > > >>> * rebased to the linux-kernel-v6.7.0-rc4 in Ulf Hansson next branch. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V13 00/21] Add support UHS-II for GL9755. > > >>> * Patch#03: Move mmc_card_uhs2() to include/linux/mmc/host.h, so that > > >>> mmc_card_uhs2() can be available for host drivers. > > >>> * Patch#10: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the > > >>> sdhci_uhs2_dump_regs(). > > >>> * Patch#11: Since mmc_card_uhs2() is the same as sdhci_uhs2_mode(), so > > >>> drop sdhci_uhs2_mode() and use mmc_card_uhs2() instead of > > >>> sdhci_uhs2_mode(). > > >>> * Patch#13: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the > > >>> sdhci_uhs2_set_timeout(). > > >>> * Patch#14: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the > > >>> sdhci_uhs2_set_ios(). > > >>> * Patch#16: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the > > >>> sdhci_uhs2_request(). > > >>> * Patch#17: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the > > >>> sdhci_uhs2_complete_work(), sdhci_uhs2_irq() and > > >>> sdhci_uhs2_thread_irq(). > > >>> * Patch#18: Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the > > >>> __sdhci_uhs2_remove_host(). > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230915094351.11120-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v13 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#7: for core > > >>> patch#8-#20: for sdhci > > >>> patch#21: for GL9755 > > >>> > > >>> Changes in v13 (November. 17, 2023) > > >>> * rebased to the linux-kernel-v6.7.0-rc1 in Ulf Hansson next branch. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V12 00/23] Add support UHS-II for GL9755. > > >>> * according to the comments provided by Ulf Hansson to modify the > > >>> patches base on the [V12 00/23] Add support UHS-II for GL9755. > > >>> * Add new patch#6 to re-factoring the code. > > >>> * Patch#7: Separate __mmc_go_idle() into one patch for re-factorring the code. > > >>> Move mmc_decode_scr declaration to sd.h. > > >>> Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN. > > >>> Drop unnecessary comment. > > >>> * Patch#11: Use ios timing to stead MMC_UHS2_SUPPORT for indicate the UHS2 mode. > > >>> * Patch#12: Drop use vmmc2. > > >>> Modify comment message. > > >>> * Patch#13: Modify comment message. > > >>> * Patch#14: Add judgment condition for power mode in the __sdhci_uhs2_set_ios(). > > >>> Modify comment message. > > >>> * Patch#15: Merge Patch#15, Patch#16 and Patch#17 of v12 version into Patch#15 in v13 version. > > >>> Use definitions to simplify code. > > >>> Modify comment message. > > >>> * Patch#16: Re-order function to avoid declaration. > > >>> Remove unnecessary function. > > >>> * Patch#17: Re-order function to avoid declaration. > > >>> Remove unnecessary definitions. > > >>> * Patch#18: Re-order function to avoid declaration. > > >>> Use vqmmc2 to stead vmmc2. > > >>> * Patch#21: Ues uhs2_sd_tran to stead MMC_UHS2_SD_TRAN. > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230915094351.11120-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v12 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#22: for sdhci > > >>> patch#23: for GL9755 > > >>> > > >>> Changes in v12 (September. 15, 2023) > > >>> * rebased to the linux-kernel-v6.6.0-rc1 in Ulf Hansson next branch. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V11 00/23] Add support UHS-II for GL9755. > > >>> * according to the comments provided by Ulf Hansson to modify the > > >>> patches base on the [V11 00/23] Add support UHS-II for GL9755. > > >>> * Patch#5: Remove unused max_current_180_vdd2. > > >>> * Patch#6: Use mmc_op_multi() to check DCMD which supports multi > > >>> read/write in mmc_uhs2_prepare_cmd(). > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230908095330.12075-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v11 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#22: for sdhci > > >>> patch#23: for GL9755 > > >>> > > >>> Changes in v11 (September. 08, 2023) > > >>> * rebased to the linux-kernel-v6.5.0-rc5 in Ulf Hansson next branch. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V10 00/23] Add support UHS-II for GL9755. > > >>> * Patch#18: Drop the check mmc_card_uhs2_hd_mode(host->mmc) > > >>> in sdhci_uhs2_set_transfer_mode(). > > >>> * Patch#20: Remove unused ocr_avail_uhs2. > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230721101349.12387-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v10 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#22: for sdhci > > >>> patch#23: for GL9755 > > >>> > > >>> Changes in v10 (August. 18, 2023) > > >>> * rebased to the linux-kernel-v6.5.0-rc5 in Ulf Hansson next branch. > > >>> * according to the comments provided by Ulf Hansson to modify the > > >>> patches base on the [V9 00/23] Add support UHS-II for GL9755. > > >>> * Patch#2: Drop unnecessary definitions and code. > > >>> * Patch#3: Modify the commit message. > > >>> * Patch#4: Modify the commit message. > > >>> * Patch#5: Drop unnecessary definitions. > > >>> * Patch#6: Move some definitions of PatchV9[02/23] to PatchV10[06/23]. > > >>> Move some definitions of PatchV9[05/23] to PatchV10[06/23]. > > >>> Drop do_multi in the mmc_blk_rw_rq_prep(). > > >>> Use tmode_half_duplex to instead of uhs2_tmode0_flag. > > >>> Move entire control of the tmode into mmc_uhs2_prepare_cmd(). > > >>> * Patch#11: Move some definitions of PatchV9[05/23] to PatchV10[11/23]. > > >>> * Patch#18: Use tmode_half_duplex to instead of uhs2_tmode0_flag > > >>> in sdhci_uhs2_set_transfer_mode(). > > >>> * Patch#20: Move some definitions of PatchV9[05/23] to PatchV10[20/23]. > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230721101349.12387-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v9 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#22: for sdhci > > >>> patch#23: for GL9755 > > >>> > > >>> Changes in v9 (July. 21, 2023) > > >>> * rebased to the linux-kernel-v6.5.0-rc1 in Ulf Hansson next branch. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V8 00/23] Add support UHS-II for GL9755. > > >>> * Patch#2: move sd_uhs2_operation definition of PatchV8[05/23] > > >>> to PatchV9[02/23] for avoid compilation errors. > > >>> move uhs2_control definition of PatchV8[05/23] > > >>> to PatchV9[02/23] for avoid compilation errors. > > >>> move mmc_host flags definition of PatchV8[05/23] > > >>> to PatchV9[02/23] for avoid compilation errors. > > >>> move mmc_host flags MMC_UHS2_SUPPORT definition of > > >>> PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > > >>> move mmc_host flags MMC_UHS2_SD_TRAN definition of > > >>> PatchV8[05/23] to PatchV9[02/23] for avoid compilation errors. > > >>> * Patch#7: Modify the commit message. > > >>> * Patch#8: Modify the commit message. > > >>> * Patch#11: Modify annotations in sdhci_get_vdd_value(). > > >>> * Patch#14: Simplity the turning_on_clk in sdhci_set_ios(). > > >>> * Patch#18: Modify the annotations in __sdhci_uhs2_send_command(). > > >>> * Patch#19: Cancel export state of sdhci_set_mrq_done() function. > > >>> * Patch#23: Rename gl9755_pre_detect_init() to sdhci_gli_pre_detect_init(). > > >>> Rename gl9755_uhs2_reset_sd_tran() to > > >>> sdhci_gli_uhs2_reset_sd_tran(). > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230621100151.6329-1-victorshihgli@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v8 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup > > >>> Sequence[2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence > > >>> [2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include > > >>> Section 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II > > >>> Setting Register Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy > > >>> SD compatibility and preserve Legacy SD infrastructures (Section 7.1.1 > > >>> Packet Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#22: for sdhci > > >>> patch#23: for GL9755 > > >>> > > >>> Changes in v8 (June. 21, 2023) > > >>> * rebased to the linux-kernel-v6.4.0-rc6 in Ulf Hansson next branch. > > >>> * fix most of checkpatch warnings/errors. > > >>> * according to the comments provided by Adrian Hunter to modify the > > >>> patches base on the [V7 00/23] Add support UHS-II for GL9755. > > >>> * Patch#6: Add MMC_UHS2_SUPPORT to be cleared in sd_uhs2_detect(). > > >>> Modify return value in sd_uhs2_attach(). > > >>> * Patch#7: Use tabs instead of spaces. > > >>> * Patch#8: Modify MODULE_LICENSE from "GPL v2" to "GPL". > > >>> * Patch#10: Adjust the position of matching brackets. > > >>> * Patch#11: Adjust the position of matching brackets. > > >>> Add the initial value of the pwr in sdhci_uhs2_set_power(). > > >>> * Patch#13: Initialization be combined with declaration and realigned > > >>> in sdhci_calc_timeout_uhs2(). > > >>> Forward declare struct mmc_command in sdhci_uhs2.h. > > >>> * Patch#14: Add the judgment formula for MMC_TIMING_SPEED_A_HD, > > >>> MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > > >>> __sdhci_uhs2_set_ios(). > > >>> Add the switch case for MMC_TIMING_SPEED_A_HD, > > >>> MMC_TIMING_SPEED_B and MMC_TIMING_SPEED_B_HD in > > >>> sdhci_get_preset_value(). > > >>> mmc_opt_regulator_set_ocr() to instead of > > >>> mmc_regulator_set_ocr() in sdhci_uhs2_set_ios(). > > >>> * Patch#15: usleep_range() to instead of udelay() in > > >>> sdhci_uhs2_interface_detect(). > > >>> read_poll_timeout() to instead of read_poll_timeout_atomic() > > >>> in sdhci_uhs2_interface_detect(). > > >>> Modify return value in sdhci_uhs2_do_detect_init(). > > >>> * Patch#16: Remove unnecessary include file. > > >>> read_poll_timeout() to instead of read_poll_timeout_atomic() > > >>> in sdhci_uhs2_enable_clk(). > > >>> Put the comment on the end and put the lines in descending > > >>> line length in sdhci_uhs2_enable_clk(). > > >>> Modify return value in sdhci_uhs2_enable_clk(). > > >>> * Patch#17: Reorder the definitions and lose the parentheses in > > >>> sdhci_uhs2_set_config(). > > >>> read_poll_timeout() to instead of read_poll_timeout_atomic() > > >>> in sdhci_uhs2_check_dormant(). > > >>> * Patch#18: Adjust the position of matching brackets in > > >>> sdhci_uhs2_send_command_retry(). > > >>> Modify CameCase definition in __sdhci_uhs2_finish_command(). > > >>> Modify error message in __sdhci_uhs2_finish_command(). > > >>> sdhci_uhs2_send_command_retry() to instead of > > >>> sdhci_uhs2_send_command() in sdhci_uhs2_request(). > > >>> Use sdhci_uhs2_mode() to simplify code in > > >>> sdhci_uhs2_request_atomic(). > > >>> Add forward declaration for sdhci_send_command(). > > >>> * Patch#19: Forward declare struct mmc_request in sdhci_uhs2.h. > > >>> Remove forward declaration of sdhci_send_command(). > > >>> Use mmc_dev() to simplify code in sdhci_request_done_dma(). > > >>> * Patch#20: Change return type to void for __sdhci_uhs2_add_host_v4(). > > >>> Remove unused variables in __sdhci_uhs2_add_host_v4(). > > >>> * Patch#22: Add config select MMC_SDHCI_UHS2 in Kconfig. > > >>> * Patch#23: Use sdhci_get_vdd_value() to simplify code in > > >>> gl9755_set_power(). > > >>> Use read_poll_timeout_atomic() to simplify code in > > >>> sdhci_wait_clock_stable(). > > >>> Use read_poll_timeout_atomic() to simplify code in > > >>> sdhci_gl9755_reset(). > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/VictorShih/linux-uhs2.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20230331105546.13607-1-victor.shih@genesyslogic.com.tw/ > > >>> > > >>> ----------------- original cover letter from v7 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > >>> [2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > >>> Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > >>> Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#22: for sdhci > > >>> patch#23: for GL9755 > > >>> > > >>> Changes in v7 (Mar. 31, 2023) > > >>> * rebased to the linux-kernel-v6.3.0-rc3 in Ulf Hansson next branch. > > >>> * according to the guidance and overall architecture provided > > >>> by Ulf Hansson, Ben Chuang and Jason Lai to implement the > > >>> UHS-2 Core function based on the patches of the [V4,0/6] > > >>> Preparations to support SD UHS-II cards[5]. > > >>> * according to the guidance and comments provided by > > >>> Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement > > >>> the UHS-2 Host function based on the patches of the > > >>> [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. > > >>> * implement the necessary function to let the UHS-2 Core/Host > > >>> work properly. > > >>> * fix most of checkpatch warnings/errors. > > >>> * according to the guidance and comments provided by > > >>> Adrian Hunter, Ben Chuang to implement the UHS-2 > > >>> Host function based on the patches of the > > >>> [V5,00/26] Add support UHS-II for GL9755[6]. > > >>> * according to the guidance and comments provided by > > >>> Ulf Hanssion, Adrian Hunter, Ben Chuang to implement the UHS-2 > > >>> Host function based on the patches of the > > >>> [V6,00/24] Add support UHS-II for GL9755[7]. > > >>> * The uhs2_post_attach_sd() function is no longer needed so drop > > >>> the V6 version of the Patch#22. > > >>> * Modifies the usage of the flags used by the sdhci host for > > >>> MMC_UHS2_INITIALIZED. > > >>> * Patch#1: Drop unnecessary bracket. > > >>> * Patch#2: Drop sd_uhs2_set_ios function. > > >>> Used ->uhs2_control() callback for uhs2_set_ios > > >>> in sd_uhs2_power_up(). > > >>> Used ->uhs2_control() callback for uhs2_set_ios > > >>> in sd_uhs2_power_off(). > > >>> Drop MMC_TIMING_SD_UHS2 in favor of MMC_TIMING_UHS2_SPEED_A. > > >>> Modify sd_uhs2_legacy_init to avoid the > > >>> sd_uhs2_reinit cycle issue. > > >>> * Patch#5: Drop unnecessary definitions. > > >>> * Patch#6: Drop unnecessary function. > > >>> Drop uhs2_state in favor of ios->timing. > > >>> * Patch#7: Reorder values and positions of definitions. > > >>> * Patch#9: Used sdhci_uhs2_mode function to simplify. > > >>> * Patch#11: Drop pwr variable in sdhci_uhs2_set_power function. > > >>> * Patch#14: Modify some descriptions. > > >>> Drop unnecessary function. > > >>> * Patch#15: Drop using uhs2_reset ops and use sdhci_uhs2_reset function > > >>> in the sdhci_do_detect_init function. > > >>> * Patch#17: Drop unnecessary function. > > >>> * Patch#18: Drop unnecessary whitespace changes. > > >>> Cancel the export state of some functions. > > >>> * Patch#19: Drop unnecessary function. > > >>> Used sdhci_uhs2_mode function to simplify. > > >>> Modify some descriptions. > > >>> Cancel the export state of some functions. > > >>> * Patch#20: Drop using __sdhci_uhs2_host function and use > > >>> __sdhci_add_host function in sdhci_uhs2_add_host function. > > >>> Cancel the export state of some functions. > > >>> * Patch#23: Drop using uhs2_post_attach_sd function. > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ > > >>> [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ > > >>> [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@genesyslogic.com.tw/ > > >>> [7] https://patchwork.kernel.org/project/linux-mmc/cover/20221213090047.3805-1-victor.shih@genesyslogic.com.tw/ > > >>> > > >>> ----------------- original cover letter from v6 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > >>> [2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > >>> Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > >>> Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#23: for sdhci > > >>> patch#24: for GL9755 > > >>> > > >>> Changes in v6 (Dec. 12, 2022) > > >>> * rebased to the linux-kernel-v6.1.0-rc8 in Ulf Hansson next branch. > > >>> * according to the guidance and overall architecture provided > > >>> by Ulf Hansson, Ben Chuang and Jason Lai to implement the > > >>> UHS-2 Core function based on the patches of the [V4,0/6] > > >>> Preparations to support SD UHS-II cards[5]. > > >>> * according to the guidance and comments provided by > > >>> Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement > > >>> the UHS-2 Host function based on the patches of the > > >>> [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. > > >>> * implement the necessary function to let the UHS-2 Core/Host > > >>> work properly. > > >>> * fix most of checkpatch warnings/errors. > > >>> * according to the guidance and comments provided by > > >>> Adrian Hunter, Ben Chuang to implement the UHS-2 > > >>> Host function based on the patches of the > > >>> [V5,00/26] Add support UHS-II for GL9755[6]. > > >>> * The uhs2_post_attach_sd() has implemented in Patch#6 and > > >>> Patch#17 so drop the V5 version of the Patch#23. > > >>> * Modifies the usage of the flags used by the sdhci host for > > >>> MMC_UHS2_INITIALIZED. > > >>> * Patch#5: Drop unused definitions and functions. > > >>> * Patch#7: Rename definitions. > > >>> Use BIT() GENMASK() in some cases. > > >>> * Patch#8: Merge V5 version of Patch[7] and Patch[9] into > > >>> V6 version of Patch[8]. > > >>> * Patch#9: Drop unnecessary function. > > >>> Rename used definitions. > > >>> * Patch#10: Drop unnecessary function and simplify some code. > > >>> * Patch#11: Drop unnecessary function. > > >>> Add new mmc_opt_regulator_set_ocr function. > > >>> * Patch#13: Drop unnecessary function. > > >>> Use GENMASK() and FIELD_PREP() in some cases. > > >>> * Patch#14: Drop unnecessary function. > > >>> Modify return value in some function. > > >>> Use GENMASK() and FIELD_PREP() in some cases. > > >>> * Patch#15: Drop unnecessary function. > > >>> Rename used definitions. > > >>> Use GENMASK() and FIELD_GET() in some cases. > > >>> Wrap at 100 columns in some functions. > > >>> * Patch#16: Drop unnecessary function. > > >>> * Patch#17: Drop unnecessary function. > > >>> Drop the unnecessary parameter when call the DBG() > > >>> function. > > >>> Rename used definitions. > > >>> Cancel the export state of some functions. > > >>> Use GENMASK() and FIELD_PREP() in some cases. > > >>> * Patch#18: Drop unnecessary function. > > >>> Add uhs2_dev_cmd function to simplify some functions. > > >>> Rename used definitions. > > >>> Cancel the export state of some functions. > > >>> Use GENMASK() and FIELD_PREP() in some cases. > > >>> * Patch#19: Drop unnecessary function. > > >>> Add sdhci_uhs2_mode() in some functions. > > >>> Rename used definitions. > > >>> Cancel the export state of some functions. > > >>> * Patch#20: Add new complete_work_fn/thread_irq_fn variables in > > >>> struct sdhci_host. > > >>> Use complete_work_fn/thread_irq_fn variables in > > >>> sdhci_alloc_host()/sdhci_uhs2_add_host(). > > >>> Rename used definitions. > > >>> * Patch[24]: Rename used definitions. > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ > > >>> [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ > > >>> [6] https://patchwork.kernel.org/project/linux-mmc/cover/20221019110647.11076-1-victor.shih@genesyslogic.com.tw/ > > >>> > > >>> ----------------- original cover letter from v5 ----------------- > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > >>> [2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > >>> Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > >>> Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#6: for core > > >>> patch#7-#25: for sdhci > > >>> patch#26: for GL9755 > > >>> > > >>> Changes in v5 (Oct. 19, 2022) > > >>> * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch. > > >>> * according to the guidance and overall architecture provided > > >>> by Ulf Hansson, Ben Chuang and Jason Lai to implement the > > >>> UHS-2 Core function based on the patches of the [V4,0/6] > > >>> Preparations to support SD UHS-II cards[5]. > > >>> * according to the guidance and comments provided by > > >>> Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement > > >>> the UHS-2 Host function based on the patches of the > > >>> [RFC,v3.1,00/27] Add support UHS-II for GL9755[4]. > > >>> * implement the necessary function to let the UHS-2 Core/Host > > >>> work properly. > > >>> * fix most of checkpatch warnings/errors > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/ > > >>> [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/ > > >>> > > >>> ----------------- original cover letter from v3.1 ----------------- > > >>> This is an interim snapshot of our next version, v4, for enabling > > >>> UHS-II on MMC/SD. > > >>> > > >>> It is focused on 'sdhci' side to address Adrian's comments regarding > > >>> "modularising" sdhci-uhs2.c. > > >>> The whole aim of this version is to get early feedback from Adrian (and > > >>> others) on this issue. Without any consensus about the code structure, > > >>> it would make little sense to go further ahead on sdhci side. > > >>> (Actually, Adrian has made no comments other than "modularising" so far.) > > >>> > > >>> I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch > > >>> set to meet what I believe Adrian expects; no UHS-II related code in > > >>> Legacy (UHS-I) code or sdhci.c. > > >>> > > >>> Nevertheless, almost of all changes I made are trivial and straightforward > > >>> in this direction, and I believe that there is no logic changed since v3 > > >>> except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II > > >>> command sequences in addition to UHS-II errors. So I added extra handlings. > > >>> > > >>> I admit that there is plenty of room for improvements (for example, > > >>> handling host->flags), but again the focal point here is how sdhci-uhs2.c > > >>> should be built as a module. > > >>> > > >>> Please review this series (particularly Patch#8-#26 and #27) from this > > >>> viewpoint in the first place. > > >>> (Ben is working on 'host' side but there is no change on 'host' side > > >>> in this submission except a minor tweak.) > > >>> > > >>> Thanks, > > >>> -Takahiro Akashi > > >>> > > >>> ------ original cover letter from v3 ------ > > >>> Summary > > >>> ======= > > >>> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility. > > >>> > > >>> About UHS-II, roughly deal with the following three parts: > > >>> 1) A UHS-II detection and initialization: > > >>> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence > > >>> [2]). > > >>> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]). > > >>> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section > > >>> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register > > >>> Setup Sequence. > > >>> > > >>> 2) Send Legacy SD command through SD-TRAN > > >>> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD > > >>> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet > > >>> Types and Format Overview[3]). > > >>> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II > > >>> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]). > > >>> > > >>> 3) UHS-II Interrupt > > >>> - Except for UHS-II error interrupts, most interrupts share the original > > >>> interrupt registers. > > >>> > > >>> Patch structure > > >>> =============== > > >>> patch#1-#7: for core > > >>> patch#8-#17: for sdhci > > >>> patch#18-#21: for GL9755 > > >>> > > >>> Tests > > >>> ===== > > >>> Ran 'dd' command to evaluate the performance: > > >>> (SanDisk UHS-II card on GL9755 controller) > > >>> Read Write > > >>> UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s > > >>> UHS-II enabled : 206MB/s 80MB/s > > >>> > > >>> TODO > > >>> ==== > > >>> - replace some define with BIT macro > > >>> > > >>> Reference > > >>> ========= > > >>> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git > > >>> [2] SD Host Controller Simplified Specification 4.20 > > >>> [3] UHS-II Simplified Addendum 1.02 > > >>> > > >>> Changes in v3 (Jul. 10, 2020) > > >>> * rebased to v5.8-rc4 > > >>> * add copyright notice > > >>> * reorganize the patch set and split some commits into smaller ones > > >>> * separate uhs-2 headers from others > > >>> * correct wrong spellings > > >>> * fix most of checkpatch warnings/errors > > >>> * remove all k[cz]alloc() from the code > > >>> * guard sdhci-uhs2 specific code with > > >>> 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))' > > >>> * make sdhci-uhs2.c as a module > > >>> * trivial changes, including > > >>> - rename back sdhci-core.c to sdhci.c > > >>> - allow vendor code to disable uhs2 if v4_mode == 0 > > >>> in __sdhci_add_host() > > >>> - merge uhs2_power_up() into mmc_power_up() > > >>> - remove flag_uhs2 from mmc_attach_sd() > > >>> - add function descriptions to EXPORT'ed functions > > >>> - other minor code optimization > > >>> > > >>> Changes in v2 (Jan. 9, 2020) > > >>> * rebased to v5.5-rc5 > > >>> > > >>> Ben Chuang (1): > > >>> mmc: sdhci-uhs2: add pre-detect_init hook > > >>> > > >>> Ulf Hansson (4): > > >>> mmc: core: Cleanup printing of speed mode at card insertion > > >>> mmc: core: Prepare to support SD UHS-II cards > > >>> mmc: core: Announce successful insertion of an SD UHS-II card > > >>> mmc: core: Extend support for mmc regulators with a vqmmc2 > > >>> > > >>> Victor Shih (17): > > >>> mmc: core: Add definitions for SD UHS-II cards > > >>> mmc: core: Add New function to re-factoring the code > > >>> mmc: core: Support UHS-II card control and access > > >>> mmc: sdhci: add UHS-II related definitions in headers > > >>> mmc: sdhci: add UHS-II module and add a kernel configuration > > >>> mmc: sdhci-uhs2: dump UHS-II registers > > >>> mmc: sdhci-uhs2: add reset function > > >>> mmc: sdhci-uhs2: add set_power() to support vdd2 > > >>> mmc: sdhci-uhs2: add set_timeout() > > >>> mmc: sdhci-uhs2: add set_ios() > > >>> mmc: sdhci-uhs2: add uhs2_control() to initialise the interface > > >>> mmc: sdhci-uhs2: add request() and others > > >>> mmc: sdhci-uhs2: add irq() and others > > >>> mmc: sdhci-uhs2: add add_host() and others to set up the driver > > >>> mmc: sdhci-pci: add UHS-II support framework > > >>> mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 > > >>> mmc: sdhci-pci-gli: enable UHS-II mode for GL9767 > > >>> > > >>> drivers/mmc/core/Makefile | 2 +- > > >>> drivers/mmc/core/bus.c | 38 +- > > >>> drivers/mmc/core/core.c | 23 +- > > >>> drivers/mmc/core/core.h | 1 + > > >>> drivers/mmc/core/mmc_ops.c | 24 +- > > >>> drivers/mmc/core/mmc_ops.h | 1 + > > >>> drivers/mmc/core/regulator.c | 34 + > > >>> drivers/mmc/core/sd.c | 10 +- > > >>> drivers/mmc/core/sd.h | 5 + > > >>> drivers/mmc/core/sd_ops.c | 9 + > > >>> drivers/mmc/core/sd_ops.h | 13 + > > >>> drivers/mmc/core/sd_uhs2.c | 1326 +++++++++++++++++++++++++++++ > > >>> drivers/mmc/host/Kconfig | 10 + > > >>> drivers/mmc/host/Makefile | 1 + > > >>> drivers/mmc/host/sdhci-pci-core.c | 16 +- > > >>> drivers/mmc/host/sdhci-pci-gli.c | 446 +++++++++- > > >>> drivers/mmc/host/sdhci-pci.h | 3 + > > >>> drivers/mmc/host/sdhci-uhs2.c | 1272 +++++++++++++++++++++++++++ > > >>> drivers/mmc/host/sdhci-uhs2.h | 190 +++++ > > >>> drivers/mmc/host/sdhci.c | 281 +++--- > > >>> drivers/mmc/host/sdhci.h | 75 +- > > >>> include/linux/mmc/card.h | 36 + > > >>> include/linux/mmc/core.h | 17 + > > >>> include/linux/mmc/host.h | 80 ++ > > >>> include/linux/mmc/sd_uhs2.h | 240 ++++++ > > >>> 25 files changed, 4003 insertions(+), 150 deletions(-) > > >>> create mode 100644 drivers/mmc/core/sd_uhs2.c > > >>> create mode 100644 drivers/mmc/host/sdhci-uhs2.c > > >>> create mode 100644 drivers/mmc/host/sdhci-uhs2.h > > >>> create mode 100644 include/linux/mmc/sd_uhs2.h > > >>> > > >>> -- > > >>> 2.25.1 > > >>> > >
Powered by blists - more mailing lists