[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <752fb193661bb5e60e5aae6f87704784cbad145d.1724868080.git.jan.kiszka@siemens.com>
Date: Wed, 28 Aug 2024 20:01:15 +0200
From: Jan Kiszka <jan.kiszka@...mens.com>
To: Nishanth Menon <nm@...com>,
Santosh Shilimkar <ssantosh@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org,
linux-pci@...r.kernel.org,
Siddharth Vadapalli <s-vadapalli@...com>,
Bao Cheng Su <baocheng.su@...mens.com>,
Hua Qian Li <huaqian.li@...mens.com>,
Diogo Ivo <diogo.ivo@...mens.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>
Subject: [PATCH v3 2/7] dt-bindings: PCI: ti,am65: Extend for use with PVU
From: Jan Kiszka <jan.kiszka@...mens.com>
The PVU on the AM65 SoC is capable of restricting DMA from PCIe devices
to specific regions of host memory. Add the optional property
"memory-regions" to point to such regions of memory when PVU is used.
Since the PVU deals with system physical addresses, utilizing the PVU
with PCIe devices also requires setting up the VMAP registers to map the
Requester ID of the PCIe device to the CBA Virtual ID, which in turn is
mapped to the system physical address. Hence, describe the VMAP
registers which are optionally unless the PVU shall used for PCIe.
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
---
CC: Lorenzo Pieralisi <lpieralisi@...nel.org>
CC: "Krzysztof Wilczyński" <kw@...ux.com>
CC: Bjorn Helgaas <bhelgaas@...gle.com>
CC: linux-pci@...r.kernel.org
---
.../bindings/pci/ti,am65-pci-host.yaml | 52 ++++++++++++++-----
1 file changed, 40 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
index 0a9d10532cc8..d8182bad92de 100644
--- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -19,16 +19,6 @@ properties:
- ti,am654-pcie-rc
- ti,keystone-pcie
- reg:
- maxItems: 4
-
- reg-names:
- items:
- - const: app
- - const: dbics
- - const: config
- - const: atu
-
interrupts:
maxItems: 1
@@ -84,12 +74,48 @@ if:
enum:
- ti,am654-pcie-rc
then:
+ properties:
+ reg:
+ minItems: 4
+ maxItems: 6
+
+ reg-names:
+ minItems: 4
+ items:
+ - const: app
+ - const: dbics
+ - const: config
+ - const: atu
+ - const: vmap_lp
+ - const: vmap_hp
+
+ memory-region:
+ minItems: 1
+ description: |
+ phandle to one or more restricted DMA pools to be used for all devices
+ behind this controller. The regions should be defined according to
+ reserved-memory/shared-dma-pool.yaml.
+ items:
+ maxItems: 1
+
required:
- dma-coherent
- power-domains
- msi-map
- num-viewport
+else:
+ properties:
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: app
+ - const: dbics
+ - const: config
+ - const: atu
+
unevaluatedProperties: false
examples:
@@ -104,8 +130,10 @@ examples:
reg = <0x5500000 0x1000>,
<0x5501000 0x1000>,
<0x10000000 0x2000>,
- <0x5506000 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
+ <0x5506000 0x1000>,
+ <0x2900000 0x1000>,
+ <0x2908000 0x1000>;
+ reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
--
2.43.0
Powered by blists - more mailing lists