linux-kernel - Re: [PATCH V2] arm64: dts: qcom: Add SD Card node for qcm6490-idp

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <35ajtwyzlnna46fatvnbnqqnks4ii7x52k56c46cy5ztv62twk@rkdp3ctk4mz3>
Date: Thu, 29 Aug 2024 09:09:33 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Sachin Gupta <quic_sachgupt@...cinc.com>
Cc: Bjorn Andersson <andersson@...nel.org>, 
	Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, 
	linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
	quic_nitirawa@...cinc.com, quic_bhaskarv@...cinc.com, quic_narepall@...cinc.com, 
	quic_rampraka@...cinc.com, quic_sartgarg@...cinc.com, quic_mapa@...cinc.com, 
	quic_cang@...cinc.com, quic_nguyenb@...cinc.com
Subject: Re: [PATCH V2] arm64: dts: qcom: Add SD Card node for qcm6490-idp

On Thu, Aug 22, 2024 at 11:14:57AM GMT, Sachin Gupta wrote:
> Add SD Card node for Qualcomm qcm6490-idp Board.
> 
> Signed-off-by: Sachin Gupta <quic_sachgupt@...cinc.com>

It doesn't look like this patch was tested, see below...

> ---
>  arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 27 ++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> index a0668f767e4b..8cfbb42af6a3 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -641,6 +641,21 @@
>  	status = "okay";
>  };
>  
> +&sdc2_clk {
> +	bias-disable;
> +	drive-strength = <16>;
> +};
> +
> +&sdc2_cmd {
> +	bias-pull-up;
> +	drive-strength = <10>;
> +};
> +
> +&sdc2_data {
> +	bias-pull-up;
> +	drive-strength = <10>;
> +};
> +
>  &sdhc_1 {
>  	non-removable;
>  	no-sd;
> @@ -652,6 +667,18 @@
>  	status = "okay";
>  };
>  
> +&sdhc_2 {
> +	status = "okay";
> +
> +	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
> +	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;

Please point me to the sd_cd definition that is going to be used here?

> +
> +	vmmc-supply = <&vreg_l9c_2p96>;
> +	vqmmc-supply = <&vreg_l6c_2p96>;
> +
> +	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
> +};
> +
>  &tlmm {
>  	gpio-reserved-ranges = <32 2>, /* ADSP */
>  			       <48 4>; /* NFC */
> -- 
> 2.17.1
> 

-- 
With best wishes
Dmitry