[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKddAkAbf7VJ-dZ_PWsDstTKgTobA_UCYK+vix1ovc-BSMOyJA@mail.gmail.com>
Date: Fri, 30 Aug 2024 13:56:17 +0800
From: Nick Hu <nick.hu@...ive.com>
To: Anup Patel <apatel@...tanamicro.com>
Cc: greentime.hu@...ive.com, zong.li@...ive.com,
"Rafael J. Wysocki" <rafael@...nel.org>, Pavel Machek <pavel@....cz>,
Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>, Andrew Jones <ajones@...tanamicro.com>,
Conor Dooley <conor.dooley@...rochip.com>, Samuel Holland <samuel.holland@...ive.com>,
Sunil V L <sunilvl@...tanamicro.com>, linux-pm@...r.kernel.org,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] time-riscv: Stop stimecmp when cpu hotplug
Hi Anup
On Thu, Aug 29, 2024 at 2:49 PM Anup Patel <apatel@...tanamicro.com> wrote:
>
> On Thu, Aug 29, 2024 at 11:53 AM Nick Hu <nick.hu@...ive.com> wrote:
> >
> > Hi Anup
> >
> > On Thu, Aug 29, 2024 at 1:18 PM Anup Patel <apatel@...tanamicro.com> wrote:
> > >
> > > On Thu, Aug 29, 2024 at 9:10 AM Nick Hu <nick.hu@...ive.com> wrote:
> > > >
> > > > Stop the stimecmp when the cpu is going to be off otherwise the timer
> > > > interrupt may pending while performing power down operation.
> > > >
> > > > Signed-off-by: Nick Hu <nick.hu@...ive.com>
> > > > ---
> > > > drivers/clocksource/timer-riscv.c | 22 +++++++++++++++-------
> > > > 1 file changed, 15 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> > > > index 48ce50c5f5e6..9a6acaa8dfb0 100644
> > > > --- a/drivers/clocksource/timer-riscv.c
> > > > +++ b/drivers/clocksource/timer-riscv.c
> > > > @@ -32,15 +32,19 @@
> > > > static DEFINE_STATIC_KEY_FALSE(riscv_sstc_available);
> > > > static bool riscv_timer_cannot_wake_cpu;
> > > >
> > > > +static void riscv_clock_stop_stimecmp(void)
> > > > +{
> > > > + csr_write(CSR_STIMECMP, ULONG_MAX);
> > > > + if (IS_ENABLED(CONFIG_32BIT))
> > > > + csr_write(CSR_STIMECMPH, ULONG_MAX);
> > > > +}
> > > > +
> > > > static void riscv_clock_event_stop(void)
> > > > {
> > > > - if (static_branch_likely(&riscv_sstc_available)) {
> > > > - csr_write(CSR_STIMECMP, ULONG_MAX);
> > > > - if (IS_ENABLED(CONFIG_32BIT))
> > > > - csr_write(CSR_STIMECMPH, ULONG_MAX);
> > > > - } else {
> > > > + if (static_branch_likely(&riscv_sstc_available))
> > > > + riscv_clock_stop_stimecmp();
> > > > + else
> > > > sbi_set_timer(U64_MAX);
> > > > - }
> > > > }
> > > >
> > > > static int riscv_clock_next_event(unsigned long delta,
> > > > @@ -126,7 +130,11 @@ static int riscv_timer_starting_cpu(unsigned int cpu)
> > > >
> > > > static int riscv_timer_dying_cpu(unsigned int cpu)
> > > > {
> > > > - disable_percpu_irq(riscv_clock_event_irq);
> > > > + if (static_branch_likely(&riscv_sstc_available))
> > > > + riscv_clock_stop_stimecmp();
> > > > + else
> > > > + disable_percpu_irq(riscv_clock_event_irq);
> > > > +
> > >
> > > Not disabling riscv_clock_event_irq here for Sstc would now
> > > cause riscv_timer_starting_cpu() to unnecessarily enable it
> > > when the CPU is powered-up.
> > >
> > > I think the below change is sufficient for this patch:
> > >
> > > diff --git a/drivers/clocksource/timer-riscv.c
> > > b/drivers/clocksource/timer-riscv.c
> > > index 48ce50c5f5e6..546fd248f4ff 100644
> > > --- a/drivers/clocksource/timer-riscv.c
> > > +++ b/drivers/clocksource/timer-riscv.c
> > > @@ -127,6 +127,11 @@ static int riscv_timer_starting_cpu(unsigned int cpu)
> > > static int riscv_timer_dying_cpu(unsigned int cpu)
> > > {
> > > disable_percpu_irq(riscv_clock_event_irq);
> > > + /*
> > > + * Stop the timer when the cpu is going to be offline otherwise
> > > + * the timer interrupt may be pending while performing power-down.
> > > + */
> > > + riscv_clock_event_stop();
> > > return 0;
> > > }
> > >
> > The sbi_exit() of OpenSBI will disable mtimecmp when
> > sbi_hsm_hart_stop() so the mtimecmp will be disabled twice if there is
> > no SSTC.
> > How about adding a SSTC available check before the riscv_clock_event_stop?
>
> Currently, OpenSBI uses mtimecmp only for implementing
> SBI time extension but in the future, OpenSBI might implement
> a per-hart timer event list to allow M-mode timer events.
>
> Don't assume in what environment the driver is running.
>
> It is possible that the driver is running under a hypervisor
> which only provides SBI time extension and does not virtualize
> Sstc extension.
>
I see, Thank you for the explanation!
> >
> > /*
> > * Stop the timer when the cpu is going to be offline otherwise
> > * the timer interrupt may be pending while performing power-down.
> > */
> > if (static_branch_likely(&riscv_sstc_available))
> > riscv_clock_event_stop();
> >
>
I'll update this one in the next version.
> Regards,
> Anup
Regards,
Nick
Powered by blists - more mailing lists