[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <63b679c8-48f1-4251-8b7e-d38b605e5089@linux.intel.com>
Date: Fri, 30 Aug 2024 11:38:53 +0200
From: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
To: Wesley Cheng <quic_wcheng@...cinc.com>, srinivas.kandagatla@...aro.org,
mathias.nyman@...el.com, perex@...ex.cz, conor+dt@...nel.org,
dmitry.torokhov@...il.com, corbet@....net, broonie@...nel.org,
lgirdwood@...il.com, tiwai@...e.com, krzk+dt@...nel.org,
Thinh.Nguyen@...opsys.com, bgoswami@...cinc.com, robh@...nel.org,
gregkh@...uxfoundation.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-sound@...r.kernel.org, linux-input@...r.kernel.org,
linux-usb@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-doc@...r.kernel.org, alsa-devel@...a-project.org
Subject: Re: [PATCH v26 24/33] ALSA: usb-audio: Introduce USB SND platform op
callbacks
On 8/29/24 21:40, Wesley Cheng wrote:
> Allow for different platforms to be notified on USB SND connect/disconnect
> sequences. This allows for platform USB SND modules to properly initialize
> and populate internal structures with references to the USB SND chip
> device.
>
> Signed-off-by: Wesley Cheng <quic_wcheng@...cinc.com>
> ---
> sound/usb/card.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++
> sound/usb/card.h | 10 +++++++++
> 2 files changed, 63 insertions(+)
>
> diff --git a/sound/usb/card.c b/sound/usb/card.c
> index 1f9dfcd8f336..7f120aa006c0 100644
> --- a/sound/usb/card.c
> +++ b/sound/usb/card.c
> @@ -118,6 +118,42 @@ MODULE_PARM_DESC(skip_validation, "Skip unit descriptor validation (default: no)
> static DEFINE_MUTEX(register_mutex);
> static struct snd_usb_audio *usb_chip[SNDRV_CARDS];
> static struct usb_driver usb_audio_driver;
> +static struct snd_usb_platform_ops *platform_ops;
> +
> +/*
> + * Register platform specific operations that will be notified on events
> + * which occur in USB SND. The platform driver can utilize this path to
> + * enable features, such as USB audio offloading, which allows for audio data
> + * to be queued by an audio DSP.
> + *
> + * Only one set of platform operations can be registered to USB SND. The
> + * platform register operation is protected by the register_mutex.
> + */
> +int snd_usb_register_platform_ops(struct snd_usb_platform_ops *ops)
> +{
> + guard(mutex)(®ister_mutex);
> + if (platform_ops)
> + return -EEXIST;
> +
> + platform_ops = ops;
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(snd_usb_register_platform_ops);
> +
> +/*
> + * Unregisters the current set of platform operations. This allows for
Unregister?
> + * a new set to be registered if required.
> + *
> + * The platform unregister operation is protected by the register_mutex.
> + */
> +int snd_usb_unregister_platform_ops(void)
> +{
> + guard(mutex)(®ister_mutex);
> + platform_ops = NULL;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(snd_usb_unregister_platform_ops);
>
> /*
> * Checks to see if requested audio profile, i.e sample rate, # of
> @@ -946,7 +982,11 @@ static int usb_audio_probe(struct usb_interface *intf,
> chip->num_interfaces++;
> usb_set_intfdata(intf, chip);
> atomic_dec(&chip->active);
> +
> + if (platform_ops && platform_ops->connect_cb)
> + platform_ops->connect_cb(chip);
> mutex_unlock(®ister_mutex);
> +
> return 0;
>
> __error:
> @@ -983,6 +1023,9 @@ static void usb_audio_disconnect(struct usb_interface *intf)
> card = chip->card;
>
> mutex_lock(®ister_mutex);
> + if (platform_ops && platform_ops->disconnect_cb)
> + platform_ops->disconnect_cb(chip);
> +
> if (atomic_inc_return(&chip->shutdown) == 1) {
> struct snd_usb_stream *as;
> struct snd_usb_endpoint *ep;
> @@ -1130,6 +1173,11 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
> chip->system_suspend = chip->num_suspended_intf;
> }
>
> + mutex_lock(®ister_mutex);
> + if (platform_ops && platform_ops->suspend_cb)
> + platform_ops->suspend_cb(intf, message);
> + mutex_unlock(®ister_mutex);
> +
> return 0;
> }
>
> @@ -1170,6 +1218,11 @@ static int usb_audio_resume(struct usb_interface *intf)
>
> snd_usb_midi_v2_resume_all(chip);
>
> + mutex_lock(®ister_mutex);
> + if (platform_ops && platform_ops->resume_cb)
> + platform_ops->resume_cb(intf);
> + mutex_unlock(®ister_mutex);
> +
> out:
> if (chip->num_suspended_intf == chip->system_suspend) {
> snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
> diff --git a/sound/usb/card.h b/sound/usb/card.h
> index 4f4f3f39b7fa..23d9e6fc69e7 100644
> --- a/sound/usb/card.h
> +++ b/sound/usb/card.h
> @@ -207,7 +207,17 @@ struct snd_usb_stream {
> struct list_head list;
> };
>
> +struct snd_usb_platform_ops {
> + void (*connect_cb)(struct snd_usb_audio *chip);
> + void (*disconnect_cb)(struct snd_usb_audio *chip);
> + void (*suspend_cb)(struct usb_interface *intf, pm_message_t message);
> + void (*resume_cb)(struct usb_interface *intf);
> +};
You're using the same mutex to protect all four callbacks, so how would
things work if e.g. you disconnected a device during the resume operation?
Powered by blists - more mailing lists