linux-kernel - [PATCH v3 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240902111127.15155-2-minda.chen@starfivetech.com>
Date: Mon,  2 Sep 2024 19:11:27 +0800
From: Minda Chen <minda.chen@...rfivetech.com>
To: Vinod Koul <vkoul@...nel.org>,
	Kishon Vijay Abraham I <kishon@...nel.org>,
	Jan Kiszka <jan.kiszka@...mens.com>,
	linux-phy@...ts.infradead.org
Cc: Emil Renner Berthing <emil.renner.berthing@...onical.com>,
	Rob Herring <robh+dt@...nel.org>,
	Conor Dooley <conor@...nel.org>,
	linux-kernel@...r.kernel.org,
	Minda Chen <minda.chen@...rfivetech.com>
Subject: [PATCH v3 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller

From: Jan Kiszka <jan.kiszka@...mens.com>

In order to connect the USB 2.0 PHY to its controller, we also need to
set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot
versions did that, but upstream firmware does not, and the kernel must
not rely on such behavior anyway. Failing to set this left the USB
gadget port invisible to connected hosts behind.

Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1]
Fixes: 16d3a71c20cf ("phy: starfive: Add JH7110 USB 2.0 PHY driver")
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
Signed-off-by: Minda Chen <minda.chen@...rfivetech.com>
---
 drivers/phy/starfive/phy-jh7110-usb.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
index 633912f8a05d..dabe59953070 100644
--- a/drivers/phy/starfive/phy-jh7110-usb.c
+++ b/drivers/phy/starfive/phy-jh7110-usb.c
@@ -10,18 +10,24 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/usb/of.h>
 
 #define USB_125M_CLK_RATE		125000000
 #define USB_LS_KEEPALIVE_OFF		0x4
 #define USB_LS_KEEPALIVE_ENABLE		BIT(4)
 
+#define USB_PDRSTN_SPLIT		BIT(17)
+#define SYSCON_USB_SPLIT_OFFSET		0x18
+
 struct jh7110_usb2_phy {
 	struct phy *phy;
 	void __iomem *regs;
+	struct regmap *sys_syscon;
 	struct clk *usb_125m_clk;
 	struct clk *app_125m;
 	enum phy_mode mode;
@@ -61,6 +67,10 @@ static int usb2_phy_set_mode(struct phy *_phy,
 		usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE));
 	}
 
+	/* Connect usb 2.0 phy mode */
+	regmap_update_bits(phy->sys_syscon, SYSCON_USB_SPLIT_OFFSET,
+			   USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
+
 	return 0;
 }
 
@@ -129,6 +139,12 @@ static int jh7110_usb_phy_probe(struct platform_device *pdev)
 	phy_set_drvdata(phy->phy, phy);
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 
+	phy->sys_syscon =
+		syscon_regmap_lookup_by_compatible("starfive,jh7110-sys-syscon");
+	if (IS_ERR(phy->sys_syscon))
+		return dev_err_probe(dev, PTR_ERR(phy->sys_syscon),
+			"Failed to get sys-syscon\n");
+
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-- 
2.17.1