lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240902-x1e80100-crd-dts-add-external-dp-support-v1-2-899c264c0eb7@linaro.org>
Date: Mon, 02 Sep 2024 18:01:36 +0300
From: Abel Vesa <abel.vesa@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: Johan Hovold <johan@...nel.org>, 
 Neil Armstrong <neil.armstrong@...aro.org>, 
 Trilok Soni <quic_tsoni@...cinc.com>, linux-arm-msm@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH 2/2] arm64: dts: qcom: x1e80100-t14s: Add external DP
 support

The Lenovo Thinkpad T14s has only 2 USB Type-C ports, both of them
supporting external DP altmode. Between each QMP combo PHY and the
corresponding Type-C port, sits one Parade PS8830 retimer which handles
both orientation and SBU muxing. Add nodes for each retimer, fix the
graphs between connectors and the PHYs accordingly add the voltage
regulators needed by each retimer and then enable DP 0 and 1.

Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
 .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts     | 278 ++++++++++++++++++++-
 1 file changed, 274 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 941dfddd6713..08ec2419f95f 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -66,7 +66,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 					};
 				};
 			};
@@ -95,7 +103,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 					};
 				};
 			};
@@ -127,6 +143,90 @@ vreg_edp_3p3: regulator-edp-3p3 {
 		regulator-boot-on;
 	};
 
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p15_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p8_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_3p3_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+	};
+
 	vreg_nvme: regulator-nvme {
 		compatible = "regulator-fixed";
 
@@ -484,6 +584,111 @@ keyboard@3a {
 	};
 };
 
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+		clock-names = "xo";
+
+		vdd15-supply = <&vreg_rtmr0_1p15>;
+		vdd18-supply = <&vreg_rtmr0_1p8>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+		clock-names = "xo";
+
+		vdd15-supply = <&vreg_rtmr1_1p15>;
+		vdd18-supply = <&vreg_rtmr1_1p8>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
+};
+
 &i2c8 {
 	clock-frequency = <400000>;
 
@@ -508,6 +713,22 @@ &mdss {
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dp3 {
 	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
@@ -588,6 +809,33 @@ &pcie6a_phy {
 	status = "okay";
 };
 
+&pm8550_gpios {
+	rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
 &pmc8380_3_gpios {
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio4";
@@ -733,6 +981,28 @@ wake-n-pins {
 		};
 	};
 
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio191";
 		function = "gpio";
@@ -771,7 +1041,7 @@ &usb_1_ss0_dwc3_hs {
 };
 
 &usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
@@ -803,5 +1073,5 @@ &usb_1_ss1_dwc3_hs {
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+	remote-endpoint = <&retimer_ss1_ss_in>;
 };

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ