| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZtWHhSQlPVMekW1I@pengutronix.de>
Date: Mon, 2 Sep 2024 11:38:13 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: David Lin <yu-hao.lin@....com>
Cc: linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org,
briannorris@...omium.org, kvalo@...nel.org, francesco@...cini.it,
tsung-hsien.hsieh@....com
Subject: Re: [PATCH v2] wifi: mwifiex: avoid AP and STA running on different
channel
On Mon, Sep 02, 2024 at 04:43:11PM +0800, David Lin wrote:
> Current firmware doesn't support AP and STA running on different
> channels simultaneously.
As mentioned here:
https://lore.kernel.org/all/ZtGnWC7SPHt7Vbbp@pengutronix.de/
AP and STA can indeed have different channels when DRCS is enabled, so I
think you have to check this in your patch.
Maybe the same question here again: Wouldn't it make sense to enable
DRCS by default?
Sascha
> FW crash would occur in such case.
> This patch avoids the issue by disabling AP and STA to run on
> different channels.
>
> Signed-off-by: David Lin <yu-hao.lin@....com>
> ---
>
> v2:
> - clean up code.
>
> ---
> .../net/wireless/marvell/mwifiex/cfg80211.c | 17 ++++---
> drivers/net/wireless/marvell/mwifiex/util.c | 44 +++++++++++++++++++
> drivers/net/wireless/marvell/mwifiex/util.h | 13 ++++++
> 3 files changed, 69 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> index 722ead51e912..3dbcab463445 100644
> --- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> @@ -781,11 +781,9 @@ mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
> break;
>
> case MWIFIEX_BSS_ROLE_STA:
> - if (priv->media_connected) {
> - mwifiex_dbg(adapter, ERROR,
> - "cannot change wiphy params when connected");
> - return -EINVAL;
> - }
> + if (priv->media_connected)
> + break;
> +
> if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
> ret = mwifiex_set_rts(priv,
> wiphy->rts_threshold);
> @@ -2069,6 +2067,9 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
> if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP)
> return -1;
>
> + if (!mwifiex_is_channel_setting_allowable(priv, params->chandef.chan))
> + return -EOPNOTSUPP;
> +
> bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param), GFP_KERNEL);
> if (!bss_cfg)
> return -ENOMEM;
> @@ -2463,6 +2464,9 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
> return -EFAULT;
> }
>
> + if (!mwifiex_is_channel_setting_allowable(priv, sme->channel))
> + return -EOPNOTSUPP;
> +
> mwifiex_dbg(adapter, INFO,
> "info: Trying to associate to bssid %pM\n", sme->bssid);
>
> @@ -4298,6 +4302,9 @@ mwifiex_cfg80211_authenticate(struct wiphy *wiphy,
> return -EINVAL;
> }
>
> + if (!mwifiex_is_channel_setting_allowable(priv, req->bss->channel))
> + return -EOPNOTSUPP;
> +
> if (priv->auth_alg != WLAN_AUTH_SAE &&
> (priv->auth_flag & HOST_MLME_AUTH_PENDING)) {
> mwifiex_dbg(priv->adapter, ERROR, "Pending auth on going\n");
> diff --git a/drivers/net/wireless/marvell/mwifiex/util.c b/drivers/net/wireless/marvell/mwifiex/util.c
> index 42c04bf858da..6512562c9fb4 100644
> --- a/drivers/net/wireless/marvell/mwifiex/util.c
> +++ b/drivers/net/wireless/marvell/mwifiex/util.c
> @@ -323,6 +323,50 @@ int mwifiex_debug_info_to_buffer(struct mwifiex_private *priv, char *buf,
> return p - buf;
> }
>
> +bool mwifiex_is_channel_setting_allowable(struct mwifiex_private *priv,
> + struct ieee80211_channel *check_chan)
> +{
> + struct mwifiex_adapter *adapter = priv->adapter;
> + int i;
> + struct mwifiex_private *tmp_priv;
> + u8 bss_role = GET_BSS_ROLE(priv);
> + struct ieee80211_channel *set_chan;
> +
> + for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) {
> + tmp_priv = adapter->priv[i];
> + if (tmp_priv == priv)
> + continue;
> +
> + set_chan = NULL;
> + if (bss_role == MWIFIEX_BSS_ROLE_STA) {
> + if (GET_BSS_ROLE(tmp_priv) == MWIFIEX_BSS_ROLE_UAP &&
> + netif_carrier_ok(tmp_priv->netdev) &&
> + cfg80211_chandef_valid(&tmp_priv->bss_chandef))
> + set_chan = tmp_priv->bss_chandef.chan;
> + } else if (bss_role == MWIFIEX_BSS_ROLE_UAP) {
> + struct mwifiex_current_bss_params *bss_params =
> + &tmp_priv->curr_bss_params;
> + int channel = bss_params->bss_descriptor.channel;
> + enum nl80211_band band =
> + mwifiex_band_to_radio_type(bss_params->band);
> + int freq =
> + ieee80211_channel_to_frequency(channel, band);
> +
> + if (GET_BSS_ROLE(tmp_priv) == MWIFIEX_BSS_ROLE_STA &&
> + tmp_priv->media_connected)
> + set_chan = ieee80211_get_channel(adapter->wiphy, freq);
> + }
> +
> + if (set_chan && !ieee80211_channel_equal(check_chan, set_chan)) {
> + mwifiex_dbg(adapter, ERROR,
> + "AP/STA must run on the same channel\n");
> + return false;
> + }
> + }
> +
> + return true;
> +}
> +
> static int
> mwifiex_parse_mgmt_packet(struct mwifiex_private *priv, u8 *payload, u16 len,
> struct rxpd *rx_pd)
> diff --git a/drivers/net/wireless/marvell/mwifiex/util.h b/drivers/net/wireless/marvell/mwifiex/util.h
> index 4699c505c0a0..16f092bb0823 100644
> --- a/drivers/net/wireless/marvell/mwifiex/util.h
> +++ b/drivers/net/wireless/marvell/mwifiex/util.h
> @@ -86,4 +86,17 @@ static inline void le16_unaligned_add_cpu(__le16 *var, u16 val)
> put_unaligned_le16(get_unaligned_le16(var) + val, var);
> }
>
> +/* Current firmware doesn't support AP and STA running on different
> + * channels simultaneously in normal mode.
> + * FW crash would occur in such case.
> + * This function is used to check if check_chan can be set to FW or not.
> + *
> + * Return:
> + * %true if check_chan can be set to FW without issues.
> + * %false there is already other channel is set to FW, setting of
> + * check_chan is not allowable.
> + */
> +bool mwifiex_is_channel_setting_allowable(struct mwifiex_private *priv,
> + struct ieee80211_channel *check_chan);
> +
> #endif /* !_MWIFIEX_UTIL_H_ */
>
> base-commit: ae98f5c9fd8ba84cd408b41faa77e65bf1b4cdfa
> --
> 2.34.1
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists