| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0a9f8470-606b-47e2-a622-038a2c070b5e@ideasonboard.com>
Date: Mon, 2 Sep 2024 13:05:42 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, linux-media@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-rpi-kernel@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org,
Naushir Patuck <naush@...pberrypi.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
Kieran Bingham <kieran.bingham@...asonboard.com>
Subject: Re: [PATCH v3 3/4] media: raspberrypi: Add support for RP1-CFE
Hi Sakari,
Thanks for the review!
On 29/08/2024 10:47, Sakari Ailus wrote:
> Moi,
>
> Thanks for the update. Some comments below...
>
> On Thu, Aug 15, 2024 at 10:28:54AM +0300, Tomi Valkeinen wrote:
>> Add support for Raspberry Pi CFE. The CFE is a hardware block that
>> contains:
>>
>> - MIPI D-PHY
>> - MIPI CSI-2 receiver
>> - Front End ISP (FE)
>>
>> The driver has been upported from the Raspberry Pi kernel commit
>> 88a681df9623 ("ARM: dts: bcm2712-rpi: Add i2c<n>_pins labels").
>>
>> Co-developed-by: Naushir Patuck <naush@...pberrypi.com>
>> Signed-off-by: Naushir Patuck <naush@...pberrypi.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
>> ---
>> MAINTAINERS | 8 +
>> drivers/media/platform/raspberrypi/Kconfig | 1 +
>> drivers/media/platform/raspberrypi/Makefile | 1 +
>> drivers/media/platform/raspberrypi/rp1-cfe/Kconfig | 14 +
>> .../media/platform/raspberrypi/rp1-cfe/Makefile | 6 +
>> .../media/platform/raspberrypi/rp1-cfe/cfe-fmts.h | 332 +++
>> .../media/platform/raspberrypi/rp1-cfe/cfe-trace.h | 196 ++
>> drivers/media/platform/raspberrypi/rp1-cfe/cfe.c | 2524 ++++++++++++++++++++
>> drivers/media/platform/raspberrypi/rp1-cfe/cfe.h | 43 +
>> drivers/media/platform/raspberrypi/rp1-cfe/csi2.c | 583 +++++
>> drivers/media/platform/raspberrypi/rp1-cfe/csi2.h | 89 +
>> drivers/media/platform/raspberrypi/rp1-cfe/dphy.c | 175 ++
>> drivers/media/platform/raspberrypi/rp1-cfe/dphy.h | 27 +
>> .../media/platform/raspberrypi/rp1-cfe/pisp-fe.c | 581 +++++
>> .../media/platform/raspberrypi/rp1-cfe/pisp-fe.h | 53 +
>> .../uapi/linux/media/raspberrypi/pisp_fe_config.h | 273 +++
>> .../linux/media/raspberrypi/pisp_fe_statistics.h | 64 +
>> 17 files changed, 4970 insertions(+)
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index f328373463b0..d67bf7c00fa3 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19119,6 +19119,14 @@ F: Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
>> F: drivers/media/platform/raspberrypi/pisp_be/
>> F: include/uapi/linux/media/raspberrypi/
>>
>> +RASPBERRY PI PISP CAMERA FRONT END
>> +M: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
>> +M: Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>
>> +L: linux-media@...r.kernel.org
>
> I think you can drop L: as it comes from the main Media tree already.
Ok. Yes, I see the list being included byt get_maintainers script even
without the above line.
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml
>> +F: drivers/media/platform/raspberrypi/rp1-cfe/
>> +
>> RC-CORE / LIRC FRAMEWORK
>> M: Sean Young <sean@...s.org>
>> L: linux-media@...r.kernel.org
>> diff --git a/drivers/media/platform/raspberrypi/Kconfig b/drivers/media/platform/raspberrypi/Kconfig
>> index e928f979019e..bd5101ffefb5 100644
>> --- a/drivers/media/platform/raspberrypi/Kconfig
>> +++ b/drivers/media/platform/raspberrypi/Kconfig
>> @@ -3,3 +3,4 @@
>> comment "Raspberry Pi media platform drivers"
>>
>> source "drivers/media/platform/raspberrypi/pisp_be/Kconfig"
>> +source "drivers/media/platform/raspberrypi/rp1-cfe/Kconfig"
>> diff --git a/drivers/media/platform/raspberrypi/Makefile b/drivers/media/platform/raspberrypi/Makefile
>> index c0d1a2dab486..af7fde84eefe 100644
>> --- a/drivers/media/platform/raspberrypi/Makefile
>> +++ b/drivers/media/platform/raspberrypi/Makefile
>> @@ -1,3 +1,4 @@
>> # SPDX-License-Identifier: GPL-2.0
>>
>> obj-y += pisp_be/
>> +obj-y += rp1-cfe/
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/Kconfig b/drivers/media/platform/raspberrypi/rp1-cfe/Kconfig
>> new file mode 100644
>> index 000000000000..95971aaac2a2
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/Kconfig
>> @@ -0,0 +1,14 @@
>> +# RP1 V4L2 camera support
>> +
>> +config VIDEO_RP1_CFE
>> + tristate "Raspberry Pi RP1 Camera Front End (CFE) video capture driver"
>> + depends on VIDEO_DEV
>> + select VIDEO_V4L2_SUBDEV_API
>> + select MEDIA_CONTROLLER
>> + select VIDEOBUF2_DMA_CONTIG
>> + select V4L2_FWNODE
>> + help
>> + Say Y here to enable support for the Raspberry Pi RP1 Camera Front End.
>> +
>> + To compile this driver as a module, choose M here. The module will be
>> + called rp1-cfe.
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/Makefile b/drivers/media/platform/raspberrypi/rp1-cfe/Makefile
>> new file mode 100644
>> index 000000000000..3f0d0fc8570e
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/Makefile
>> @@ -0,0 +1,6 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +#
>> +# Makefile for RP1 Camera Front End driver
>> +#
>> +rp1-cfe-objs := cfe.o csi2.o pisp-fe.o dphy.o
>> +obj-$(CONFIG_VIDEO_RP1_CFE) += rp1-cfe.o
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/cfe-fmts.h b/drivers/media/platform/raspberrypi/rp1-cfe/cfe-fmts.h
>> new file mode 100644
>> index 000000000000..7aecf7f83733
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/cfe-fmts.h
>> @@ -0,0 +1,332 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * RP1 Camera Front End formats definition
>> + *
>> + * Copyright (C) 2021-2024 - Raspberry Pi Ltd.
>> + */
>> +#ifndef _CFE_FMTS_H_
>> +#define _CFE_FMTS_H_
>> +
>> +#include "cfe.h"
>> +#include <media/mipi-csi2.h>
>> +
>> +static const struct cfe_fmt formats[] = {
>> + /* YUV Formats */
>> + {
>> + .fourcc = V4L2_PIX_FMT_YUYV,
>> + .code = MEDIA_BUS_FMT_YUYV8_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_YUV422_8B,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_UYVY,
>> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_YUV422_8B,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_YVYU,
>> + .code = MEDIA_BUS_FMT_YVYU8_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_YUV422_8B,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_VYUY,
>> + .code = MEDIA_BUS_FMT_VYUY8_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_YUV422_8B,
>> + },
>> + {
>> + /* RGB Formats */
>> + .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
>> + .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RGB565,
>> + },
>> + { .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
>> + .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RGB565,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */
>> + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RGB555,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */
>> + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RGB555,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */
>> + .code = MEDIA_BUS_FMT_RGB888_1X24,
>> + .depth = 24,
>> + .csi_dt = MIPI_CSI2_DT_RGB888,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */
>> + .code = MEDIA_BUS_FMT_BGR888_1X24,
>> + .depth = 24,
>> + .csi_dt = MIPI_CSI2_DT_RGB888,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_RGB32, /* argb */
>> + .code = MEDIA_BUS_FMT_ARGB8888_1X32,
>> + .depth = 32,
>> + .csi_dt = 0x0,
>> + },
>> +
>> + /* Bayer Formats */
>> + {
>> + .fourcc = V4L2_PIX_FMT_SBGGR8,
>> + .code = MEDIA_BUS_FMT_SBGGR8_1X8,
>> + .depth = 8,
>> + .csi_dt = MIPI_CSI2_DT_RAW8,
>> + .remap = { V4L2_PIX_FMT_SBGGR16, V4L2_PIX_FMT_PISP_COMP1_BGGR },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGBRG8,
>> + .code = MEDIA_BUS_FMT_SGBRG8_1X8,
>> + .depth = 8,
>> + .csi_dt = MIPI_CSI2_DT_RAW8,
>> + .remap = { V4L2_PIX_FMT_SGBRG16, V4L2_PIX_FMT_PISP_COMP1_GBRG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGRBG8,
>> + .code = MEDIA_BUS_FMT_SGRBG8_1X8,
>> + .depth = 8,
>> + .csi_dt = MIPI_CSI2_DT_RAW8,
>> + .remap = { V4L2_PIX_FMT_SGRBG16, V4L2_PIX_FMT_PISP_COMP1_GRBG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SRGGB8,
>> + .code = MEDIA_BUS_FMT_SRGGB8_1X8,
>> + .depth = 8,
>> + .csi_dt = MIPI_CSI2_DT_RAW8,
>> + .remap = { V4L2_PIX_FMT_SRGGB16, V4L2_PIX_FMT_PISP_COMP1_RGGB },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SBGGR10P,
>> + .code = MEDIA_BUS_FMT_SBGGR10_1X10,
>> + .depth = 10,
>> + .csi_dt = MIPI_CSI2_DT_RAW10,
>> + .remap = { V4L2_PIX_FMT_SBGGR16, V4L2_PIX_FMT_PISP_COMP1_BGGR },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGBRG10P,
>> + .code = MEDIA_BUS_FMT_SGBRG10_1X10,
>> + .depth = 10,
>> + .csi_dt = MIPI_CSI2_DT_RAW10,
>> + .remap = { V4L2_PIX_FMT_SGBRG16, V4L2_PIX_FMT_PISP_COMP1_GBRG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGRBG10P,
>> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
>> + .depth = 10,
>> + .csi_dt = MIPI_CSI2_DT_RAW10,
>> + .remap = { V4L2_PIX_FMT_SGRBG16, V4L2_PIX_FMT_PISP_COMP1_GRBG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SRGGB10P,
>> + .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>> + .depth = 10,
>> + .csi_dt = MIPI_CSI2_DT_RAW10,
>> + .remap = { V4L2_PIX_FMT_SRGGB16, V4L2_PIX_FMT_PISP_COMP1_RGGB },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SBGGR12P,
>> + .code = MEDIA_BUS_FMT_SBGGR12_1X12,
>> + .depth = 12,
>> + .csi_dt = MIPI_CSI2_DT_RAW12,
>> + .remap = { V4L2_PIX_FMT_SBGGR16, V4L2_PIX_FMT_PISP_COMP1_BGGR },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGBRG12P,
>> + .code = MEDIA_BUS_FMT_SGBRG12_1X12,
>> + .depth = 12,
>> + .csi_dt = MIPI_CSI2_DT_RAW12,
>> + .remap = { V4L2_PIX_FMT_SGBRG16, V4L2_PIX_FMT_PISP_COMP1_GBRG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGRBG12P,
>> + .code = MEDIA_BUS_FMT_SGRBG12_1X12,
>> + .depth = 12,
>> + .csi_dt = MIPI_CSI2_DT_RAW12,
>> + .remap = { V4L2_PIX_FMT_SGRBG16, V4L2_PIX_FMT_PISP_COMP1_GRBG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SRGGB12P,
>> + .code = MEDIA_BUS_FMT_SRGGB12_1X12,
>> + .depth = 12,
>> + .csi_dt = MIPI_CSI2_DT_RAW12,
>> + .remap = { V4L2_PIX_FMT_SRGGB16, V4L2_PIX_FMT_PISP_COMP1_RGGB },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SBGGR14P,
>> + .code = MEDIA_BUS_FMT_SBGGR14_1X14,
>> + .depth = 14,
>> + .csi_dt = MIPI_CSI2_DT_RAW14,
>> + .remap = { V4L2_PIX_FMT_SBGGR16, V4L2_PIX_FMT_PISP_COMP1_BGGR },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGBRG14P,
>> + .code = MEDIA_BUS_FMT_SGBRG14_1X14,
>> + .depth = 14,
>> + .csi_dt = MIPI_CSI2_DT_RAW14,
>> + .remap = { V4L2_PIX_FMT_SGBRG16, V4L2_PIX_FMT_PISP_COMP1_GBRG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGRBG14P,
>> + .code = MEDIA_BUS_FMT_SGRBG14_1X14,
>> + .depth = 14,
>> + .csi_dt = MIPI_CSI2_DT_RAW14,
>> + .remap = { V4L2_PIX_FMT_SGRBG16, V4L2_PIX_FMT_PISP_COMP1_GRBG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SRGGB14P,
>> + .code = MEDIA_BUS_FMT_SRGGB14_1X14,
>> + .depth = 14,
>> + .csi_dt = MIPI_CSI2_DT_RAW14,
>> + .remap = { V4L2_PIX_FMT_SRGGB16, V4L2_PIX_FMT_PISP_COMP1_RGGB },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SBGGR16,
>> + .code = MEDIA_BUS_FMT_SBGGR16_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RAW16,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + .remap = { V4L2_PIX_FMT_SBGGR16, V4L2_PIX_FMT_PISP_COMP1_BGGR },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGBRG16,
>> + .code = MEDIA_BUS_FMT_SGBRG16_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RAW16,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + .remap = { V4L2_PIX_FMT_SGBRG16, V4L2_PIX_FMT_PISP_COMP1_GBRG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SGRBG16,
>> + .code = MEDIA_BUS_FMT_SGRBG16_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RAW16,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + .remap = { V4L2_PIX_FMT_SGRBG16, V4L2_PIX_FMT_PISP_COMP1_GRBG },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_SRGGB16,
>> + .code = MEDIA_BUS_FMT_SRGGB16_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RAW16,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + .remap = { V4L2_PIX_FMT_SRGGB16, V4L2_PIX_FMT_PISP_COMP1_RGGB },
>> + },
>> + /* PiSP Compressed Mode 1 */
>> + {
>> + .fourcc = V4L2_PIX_FMT_PISP_COMP1_RGGB,
>> + .code = MEDIA_BUS_FMT_SRGGB16_1X16,
>> + .depth = 8,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_PISP_COMP1_BGGR,
>> + .code = MEDIA_BUS_FMT_SBGGR16_1X16,
>> + .depth = 8,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_PISP_COMP1_GBRG,
>> + .code = MEDIA_BUS_FMT_SGBRG16_1X16,
>> + .depth = 8,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_PISP_COMP1_GRBG,
>> + .code = MEDIA_BUS_FMT_SGRBG16_1X16,
>> + .depth = 8,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + },
>> + /* Greyscale format */
>> + {
>> + .fourcc = V4L2_PIX_FMT_GREY,
>> + .code = MEDIA_BUS_FMT_Y8_1X8,
>> + .depth = 8,
>> + .csi_dt = MIPI_CSI2_DT_RAW8,
>> + .remap = { V4L2_PIX_FMT_Y16, V4L2_PIX_FMT_PISP_COMP1_MONO },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_Y10P,
>> + .code = MEDIA_BUS_FMT_Y10_1X10,
>> + .depth = 10,
>> + .csi_dt = MIPI_CSI2_DT_RAW10,
>> + .remap = { V4L2_PIX_FMT_Y16, V4L2_PIX_FMT_PISP_COMP1_MONO },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_Y12P,
>> + .code = MEDIA_BUS_FMT_Y12_1X12,
>> + .depth = 12,
>> + .csi_dt = MIPI_CSI2_DT_RAW12,
>> + .remap = { V4L2_PIX_FMT_Y16, V4L2_PIX_FMT_PISP_COMP1_MONO },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_Y14P,
>> + .code = MEDIA_BUS_FMT_Y14_1X14,
>> + .depth = 14,
>> + .csi_dt = MIPI_CSI2_DT_RAW14,
>> + .remap = { V4L2_PIX_FMT_Y16, V4L2_PIX_FMT_PISP_COMP1_MONO },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_Y16,
>> + .code = MEDIA_BUS_FMT_Y16_1X16,
>> + .depth = 16,
>> + .csi_dt = MIPI_CSI2_DT_RAW16,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + .remap = { V4L2_PIX_FMT_Y16, V4L2_PIX_FMT_PISP_COMP1_MONO },
>> + },
>> + {
>> + .fourcc = V4L2_PIX_FMT_PISP_COMP1_MONO,
>> + .code = MEDIA_BUS_FMT_Y16_1X16,
>> + .depth = 8,
>> + .flags = CFE_FORMAT_FLAG_FE_OUT,
>> + },
>> +
>> + /* Embedded data formats */
>> + {
>> + .fourcc = V4L2_META_FMT_GENERIC_8,
>> + .code = MEDIA_BUS_FMT_META_8,
>> + .depth = 8,
>> + .csi_dt = MIPI_CSI2_DT_EMBEDDED_8B,
>> + .flags = CFE_FORMAT_FLAG_META_CAP,
>> + },
>> + {
>> + .fourcc = V4L2_META_FMT_GENERIC_CSI2_10,
>> + .code = MEDIA_BUS_FMT_META_10,
>> + .depth = 10,
>> + .csi_dt = MIPI_CSI2_DT_EMBEDDED_8B,
>> + .flags = CFE_FORMAT_FLAG_META_CAP,
>> + },
>> + {
>> + .fourcc = V4L2_META_FMT_GENERIC_CSI2_12,
>> + .code = MEDIA_BUS_FMT_META_12,
>> + .depth = 12,
>> + .csi_dt = MIPI_CSI2_DT_EMBEDDED_8B,
>> + .flags = CFE_FORMAT_FLAG_META_CAP,
>> + },
>> +
>> + /* Frontend formats */
>> + {
>> + .fourcc = V4L2_META_FMT_RPI_FE_CFG,
>> + .code = MEDIA_BUS_FMT_FIXED,
>> + .flags = CFE_FORMAT_FLAG_META_OUT,
>> + },
>> + {
>> + .fourcc = V4L2_META_FMT_RPI_FE_STATS,
>> + .code = MEDIA_BUS_FMT_FIXED,
>> + .flags = CFE_FORMAT_FLAG_META_CAP,
>> + },
>> +};
>> +
>> +#endif /* _CFE_FMTS_H_ */
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/cfe-trace.h b/drivers/media/platform/raspberrypi/rp1-cfe/cfe-trace.h
>> new file mode 100644
>> index 000000000000..8f3e61cec8fc
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/cfe-trace.h
>> @@ -0,0 +1,196 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2024 Raspberry Pi Ltd.
>> + * Copyright (c) 2024 Ideas on Board Oy
>> + */
>> +
>> +#undef TRACE_SYSTEM
>> +#define TRACE_SYSTEM cfe
>> +
>> +#if !defined(_CFE_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
>> +#define _CFE_TRACE_H
>> +
>> +#include <linux/tracepoint.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +TRACE_EVENT(cfe_return_buffer,
>> + TP_PROTO(u32 node_id, u32 buf_idx, u32 queue_id),
>> + TP_ARGS(node_id, buf_idx, queue_id),
>> + TP_STRUCT__entry(
>> + __field(u32, node_id)
>> + __field(u32, buf_idx)
>> + __field(u32, queue_id)
>> + ),
>> + TP_fast_assign(
>> + __entry->node_id = node_id;
>> + __entry->buf_idx = buf_idx;
>> + __entry->queue_id = queue_id;
>> + ),
>> + TP_printk("node=%u buf=%u, queue=%u", __entry->node_id, __entry->buf_idx, __entry->queue_id)
>> +);
>> +
>> +DECLARE_EVENT_CLASS(cfe_buffer_template,
>> + TP_PROTO(u32 node_id, struct vb2_buffer *buf),
>> + TP_ARGS(node_id, buf),
>> + TP_STRUCT__entry(
>> + __field(u32, node_id)
>> + __field(u32, buf_idx)
>> + ),
>> + TP_fast_assign(
>> + __entry->node_id = node_id;
>> + __entry->buf_idx = buf->index;
>> + ),
>> + TP_printk("node=%u buf=%u", __entry->node_id, __entry->buf_idx)
>> +);
>> +
>> +DEFINE_EVENT(cfe_buffer_template, cfe_buffer_prepare,
>> + TP_PROTO(u32 node_id, struct vb2_buffer *buf),
>> + TP_ARGS(node_id, buf));
>> +
>> +TRACE_EVENT(cfe_buffer_queue,
>> + TP_PROTO(u32 node_id, struct vb2_buffer *buf, bool schedule_now),
>> + TP_ARGS(node_id, buf, schedule_now),
>> + TP_STRUCT__entry(
>> + __field(u32, node_id)
>> + __field(u32, buf_idx)
>> + __field(bool, schedule_now)
>> + ),
>> + TP_fast_assign(
>> + __entry->node_id = node_id;
>> + __entry->buf_idx = buf->index;
>> + __entry->schedule_now = schedule_now;
>> + ),
>> + TP_printk("node=%u buf=%u%s", __entry->node_id, __entry->buf_idx,
>> + __entry->schedule_now ? " schedule immediately" : "")
>> +);
>> +
>> +DEFINE_EVENT(cfe_buffer_template, cfe_csi2_schedule,
>> + TP_PROTO(u32 node_id, struct vb2_buffer *buf),
>> + TP_ARGS(node_id, buf));
>> +
>> +DEFINE_EVENT(cfe_buffer_template, cfe_fe_schedule,
>> + TP_PROTO(u32 node_id, struct vb2_buffer *buf),
>> + TP_ARGS(node_id, buf));
>> +
>> +TRACE_EVENT(cfe_buffer_complete,
>> + TP_PROTO(u32 node_id, struct vb2_v4l2_buffer *buf),
>> + TP_ARGS(node_id, buf),
>> + TP_STRUCT__entry(
>> + __field(u32, node_id)
>> + __field(u32, buf_idx)
>> + __field(u32, seq)
>> + __field(u64, ts)
>> + ),
>> + TP_fast_assign(
>> + __entry->node_id = node_id;
>> + __entry->buf_idx = buf->vb2_buf.index;
>> + __entry->seq = buf->sequence;
>> + __entry->ts = buf->vb2_buf.timestamp;
>> + ),
>> + TP_printk("node=%u buf=%u seq=%u ts=%llu", __entry->node_id, __entry->buf_idx,
>> + __entry->seq,
>> + __entry->ts)
>> +);
>> +
>> +TRACE_EVENT(cfe_frame_start,
>> + TP_PROTO(u32 node_id, u32 fs_count),
>> + TP_ARGS(node_id, fs_count),
>> + TP_STRUCT__entry(
>> + __field(u32, node_id)
>> + __field(u32, fs_count)
>> + ),
>> + TP_fast_assign(
>> + __entry->node_id = node_id;
>> + __entry->fs_count = fs_count;
>> + ),
>> + TP_printk("node=%u fs_count=%u", __entry->node_id, __entry->fs_count)
>> +);
>> +
>> +TRACE_EVENT(cfe_frame_end,
>> + TP_PROTO(u32 node_id, u32 fs_count),
>> + TP_ARGS(node_id, fs_count),
>> + TP_STRUCT__entry(
>> + __field(u32, node_id)
>> + __field(u32, fs_count)
>> + ),
>> + TP_fast_assign(
>> + __entry->node_id = node_id;
>> + __entry->fs_count = fs_count;
>> + ),
>> + TP_printk("node=%u fs_count=%u", __entry->node_id, __entry->fs_count)
>> +);
>> +
>> +TRACE_EVENT(cfe_prepare_next_job,
>> + TP_PROTO(bool fe_enabled),
>> + TP_ARGS(fe_enabled),
>> + TP_STRUCT__entry(
>> + __field(bool, fe_enabled)
>> + ),
>> + TP_fast_assign(
>> + __entry->fe_enabled = fe_enabled;
>> + ),
>> + TP_printk("fe_enabled=%u", __entry->fe_enabled)
>> +);
>> +
>> +/* These are copied from csi2.c */
>> +#define CSI2_STATUS_IRQ_FS(x) (BIT(0) << (x))
>> +#define CSI2_STATUS_IRQ_FE(x) (BIT(4) << (x))
>> +#define CSI2_STATUS_IRQ_FE_ACK(x) (BIT(8) << (x))
>> +#define CSI2_STATUS_IRQ_LE(x) (BIT(12) << (x))
>> +#define CSI2_STATUS_IRQ_LE_ACK(x) (BIT(16) << (x))
>> +
>> +TRACE_EVENT(csi2_irq,
>> + TP_PROTO(u32 channel, u32 status, u32 dbg),
>> + TP_ARGS(channel, status, dbg),
>> + TP_STRUCT__entry(
>> + __field(u32, channel)
>> + __field(u32, status)
>> + __field(u32, dbg)
>> + ),
>> + TP_fast_assign(
>> + __entry->channel = channel;
>> + __entry->status = status;
>> + __entry->dbg = dbg;
>> + ),
>> + TP_printk("ch=%u flags=[ %s%s%s%s%s] frame=%u line=%u\n",
>> + __entry->channel,
>> + (__entry->status & CSI2_STATUS_IRQ_FS(__entry->channel)) ? "FS " : "",
>> + (__entry->status & CSI2_STATUS_IRQ_FE(__entry->channel)) ? "FE " : "",
>> + (__entry->status & CSI2_STATUS_IRQ_FE_ACK(__entry->channel)) ? "FE_ACK " : "",
>> + (__entry->status & CSI2_STATUS_IRQ_LE(__entry->channel)) ? "LE " : "",
>> + (__entry->status & CSI2_STATUS_IRQ_LE_ACK(__entry->channel)) ? "LE_ACK " : "",
>> + __entry->dbg >> 16, __entry->dbg & 0xffff)
>> +);
>> +
>> +TRACE_EVENT(fe_irq,
>> + TP_PROTO(u32 status, u32 output_status, u32 frame_status, u32 error_status, u32 int_status),
>> + TP_ARGS(status, output_status, frame_status, error_status, int_status),
>> + TP_STRUCT__entry(
>> + __field(u32, status)
>> + __field(u32, output_status)
>> + __field(u32, frame_status)
>> + __field(u32, error_status)
>> + __field(u32, int_status)
>> + ),
>> + TP_fast_assign(
>> + __entry->status = status;
>> + __entry->output_status = output_status;
>> + __entry->frame_status = frame_status;
>> + __entry->error_status = error_status;
>> + __entry->int_status = int_status;
>> + ),
>> + TP_printk("status 0x%x out_status 0x%x frame_status 0x%x error_status 0x%x int_status 0x%x",
>> + __entry->status,
>> + __entry->output_status,
>> + __entry->frame_status,
>> + __entry->error_status,
>> + __entry->int_status)
>> +);
>> +
>> +#endif /* _CFE_TRACE_H */
>> +
>> +/* This part must be outside protection */
>> +#undef TRACE_INCLUDE_PATH
>> +#define TRACE_INCLUDE_PATH .
>> +#define TRACE_INCLUDE_FILE ../../drivers/media/platform/raspberrypi/rp1-cfe/cfe-trace
>> +#include <trace/define_trace.h>
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
>> new file mode 100644
>> index 000000000000..d63a8cde5288
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.c
>> @@ -0,0 +1,2524 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * RP1 Camera Front End Driver
>> + *
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + * Copyright (c) 2023-2024 Ideas on Board Oy
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/debugfs.h>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/err.h>
>> +#include <linux/fwnode.h>
>> +#include <linux/init.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/lcm.h>
>> +#include <linux/math.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/property.h>
>> +#include <linux/seq_file.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/videodev2.h>
>> +
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-common.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-fwnode.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +
>> +#include <linux/media/raspberrypi/pisp_fe_config.h>
>> +#include <linux/media/raspberrypi/pisp_fe_statistics.h>
>> +
>> +#include "cfe-fmts.h"
>> +#include "cfe.h"
>> +#include "csi2.h"
>> +#include "pisp-fe.h"
>> +
>> +#define CREATE_TRACE_POINTS
>> +#include "cfe-trace.h"
>> +
>> +#define CFE_MODULE_NAME "rp1-cfe"
>> +#define CFE_VERSION "1.0"
>> +
>> +#define cfe_dbg(fmt, arg...) dev_dbg(&cfe->pdev->dev, fmt, ##arg)
>
> cfe should be an argument to cfe_dbg().
Why? This, and the ones below, is an internal macro to make it easier
and shorter to do prints. Adding the parameter gives no benefit that I
can see.
>> +#define cfe_info(fmt, arg...) dev_info(&cfe->pdev->dev, fmt, ##arg)
>> +#define cfe_err(fmt, arg...) dev_err(&cfe->pdev->dev, fmt, ##arg)
>> +
>> +/* MIPICFG registers */
>> +#define MIPICFG_CFG 0x004
>> +#define MIPICFG_INTR 0x028
>> +#define MIPICFG_INTE 0x02c
>> +#define MIPICFG_INTF 0x030
>> +#define MIPICFG_INTS 0x034
>> +
>> +#define MIPICFG_CFG_SEL_CSI BIT(0)
>> +
>> +#define MIPICFG_INT_CSI_DMA BIT(0)
>> +#define MIPICFG_INT_CSI_HOST BIT(2)
>> +#define MIPICFG_INT_PISP_FE BIT(4)
>> +
>> +#define BPL_ALIGNMENT 16
>> +#define MAX_BYTESPERLINE 0xffffff00
>> +#define MAX_BUFFER_SIZE 0xffffff00
>> +/*
>> + * Max width is therefore determined by the max stride divided by the number of
>> + * bits per pixel.
>> + *
>> + * However, to avoid overflow issues let's use a 16k maximum. This lets us
>> + * calculate 16k * 16k * 4 with 32bits. If we need higher maximums, a careful
>> + * review and adjustment of the code is needed so that it will deal with
>> + * overflows correctly.
>> + */
>> +#define MAX_WIDTH 16384
>> +#define MAX_HEIGHT MAX_WIDTH
>> +/* Define a nominal minimum image size */
>> +#define MIN_WIDTH 16
>> +#define MIN_HEIGHT 16
>> +
>> +#define MIN_META_WIDTH 4
>> +#define MIN_META_HEIGHT 1
>> +
>> +const struct v4l2_mbus_framefmt cfe_default_format = {
>> + .width = 640,
>> + .height = 480,
>> + .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>> + .field = V4L2_FIELD_NONE,
>> + .colorspace = V4L2_COLORSPACE_RAW,
>> + .ycbcr_enc = V4L2_YCBCR_ENC_601,
>> + .quantization = V4L2_QUANTIZATION_FULL_RANGE,
>> + .xfer_func = V4L2_XFER_FUNC_NONE,
>> +};
>> +
>> +enum node_ids {
>> + /* CSI2 HW output nodes first. */
>> + CSI2_CH0,
>> + CSI2_CH1,
>> + CSI2_CH2,
>> + CSI2_CH3,
>> + /* FE only nodes from here on. */
>> + FE_OUT0,
>> + FE_OUT1,
>> + FE_STATS,
>> + FE_CONFIG,
>> + NUM_NODES
>> +};
>> +
>> +struct node_description {
>> + enum node_ids id;
>> + const char *name;
>> + unsigned int caps;
>> + unsigned int pad_flags;
>> + unsigned int link_pad;
>> +};
>> +
>> +/* Must match the ordering of enum ids */
>> +static const struct node_description node_desc[NUM_NODES] = {
>> + [CSI2_CH0] = {
>> + .name = "csi2-ch0",
>> + .caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_META_CAPTURE,
>> + .pad_flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = CSI2_PAD_FIRST_SOURCE + 0
>> + },
>> + /*
>> + * At the moment the main userspace component (libcamera) doesn't
>> + * support metadata with video nodes that support both video and
>> + * metadata. So for the time being this node is set to only support
>> + * V4L2_CAP_META_CAPTURE.
>> + */
>> + [CSI2_CH1] = {
>> + .name = "csi2-ch1",
>> + .caps = V4L2_CAP_META_CAPTURE,
>> + .pad_flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = CSI2_PAD_FIRST_SOURCE + 1
>> + },
>> + [CSI2_CH2] = {
>> + .name = "csi2-ch2",
>> + .caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_META_CAPTURE,
>> + .pad_flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = CSI2_PAD_FIRST_SOURCE + 2
>> + },
>> + [CSI2_CH3] = {
>> + .name = "csi2-ch3",
>> + .caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_META_CAPTURE,
>> + .pad_flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = CSI2_PAD_FIRST_SOURCE + 3
>> + },
>> + [FE_OUT0] = {
>> + .name = "fe-image0",
>> + .caps = V4L2_CAP_VIDEO_CAPTURE,
>> + .pad_flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = FE_OUTPUT0_PAD
>> + },
>> + [FE_OUT1] = {
>> + .name = "fe-image1",
>> + .caps = V4L2_CAP_VIDEO_CAPTURE,
>> + .pad_flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = FE_OUTPUT1_PAD
>> + },
>> + [FE_STATS] = {
>> + .name = "fe-stats",
>> + .caps = V4L2_CAP_META_CAPTURE,
>> + .pad_flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = FE_STATS_PAD
>> + },
>> + [FE_CONFIG] = {
>> + .name = "fe-config",
>> + .caps = V4L2_CAP_META_OUTPUT,
>> + .pad_flags = MEDIA_PAD_FL_SOURCE | MEDIA_PAD_FL_MUST_CONNECT,
>> + .link_pad = FE_CONFIG_PAD
>> + },
>> +};
>> +
>> +#define is_fe_node(node) (((node)->id) >= FE_OUT0)
>> +#define is_csi2_node(node) (!is_fe_node(node))
>> +
>> +#define node_supports_image_output(node) \
>> + (!!(node_desc[(node)->id].caps & V4L2_CAP_VIDEO_CAPTURE))
>
> No need to cast to bool through !!. Same below.
I like my bools to be bools, not ints... But at the same time, I don't
see how that would cause issues in the uses we have in this driver. So
I'll drop these.
>> +#define node_supports_meta_output(node) \
>> + (!!(node_desc[(node)->id].caps & V4L2_CAP_META_CAPTURE))
>> +#define node_supports_image_input(node) \
>> + (!!(node_desc[(node)->id].caps & V4L2_CAP_VIDEO_OUTPUT))
>> +#define node_supports_meta_input(node) \
>> + (!!(node_desc[(node)->id].caps & V4L2_CAP_META_OUTPUT))
>> +#define node_supports_image(node) \
>> + (node_supports_image_output(node) || node_supports_image_input(node))
>> +#define node_supports_meta(node) \
>> + (node_supports_meta_output(node) || node_supports_meta_input(node))
>> +
>> +#define is_image_output_node(node) \
>> + ((node)->buffer_queue.type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> +#define is_image_input_node(node) \
>> + ((node)->buffer_queue.type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
>> +#define is_image_node(node) \
>> + (is_image_output_node(node) || is_image_input_node(node))
>> +#define is_meta_output_node(node) \
>> + ((node)->buffer_queue.type == V4L2_BUF_TYPE_META_CAPTURE)
>> +#define is_meta_input_node(node) \
>> + ((node)->buffer_queue.type == V4L2_BUF_TYPE_META_OUTPUT)
>> +#define is_meta_node(node) \
>> + (is_meta_output_node(node) || is_meta_input_node(node))
>> +
>> +/* To track state across all nodes. */
>> +#define NUM_STATES 5
>> +#define NODE_REGISTERED BIT(0)
>> +#define NODE_ENABLED BIT(1)
>> +#define NODE_STREAMING BIT(2)
>> +#define FS_INT BIT(3)
>> +#define FE_INT BIT(4)
>> +
>> +struct cfe_buffer {
>> + struct vb2_v4l2_buffer vb;
>> + struct list_head list;
>> +};
>> +
>> +struct cfe_config_buffer {
>> + struct cfe_buffer buf;
>> + struct pisp_fe_config config;
>> +};
>> +
>> +static inline struct cfe_buffer *to_cfe_buffer(struct vb2_buffer *vb)
>> +{
>> + return container_of(vb, struct cfe_buffer, vb.vb2_buf);
>> +}
>> +
>> +static inline
>> +struct cfe_config_buffer *to_cfe_config_buffer(struct cfe_buffer *buf)
>> +{
>> + return container_of(buf, struct cfe_config_buffer, buf);
>> +}
>> +
>> +struct cfe_node {
>> + /* Node id */
>> + enum node_ids id;
>> + /* Pointer pointing to current v4l2_buffer */
>> + struct cfe_buffer *cur_frm;
>> + /* Pointer pointing to next v4l2_buffer */
>> + struct cfe_buffer *next_frm;
>> + /* Used to store current pixel format */
>> + struct v4l2_format vid_fmt;
>> + /* Used to store current meta format */
>> + struct v4l2_format meta_fmt;
>> + /* Buffer queue used in video-buf */
>> + struct vb2_queue buffer_queue;
>> + /* Queue of filled frames */
>> + struct list_head dma_queue;
>> + /* lock used to access this structure */
>> + struct mutex lock;
>> + /* Identifies video device for this channel */
>> + struct video_device video_dev;
>> + /* Pointer to the parent handle */
>> + struct cfe_device *cfe;
>> + /* Media pad for this node */
>> + struct media_pad pad;
>> + /* Frame-start counter */
>> + unsigned int fs_count;
>> + /* Timestamp of the current buffer */
>> + u64 ts;
>> +};
>> +
>> +struct cfe_device {
>> + struct dentry *debugfs;
>> + struct kref kref;
>> +
>> + /* peripheral base address */
>> + void __iomem *mipi_cfg_base;
>> +
>> + struct clk *clk;
>> +
>> + /* V4l2 device */
>> + struct v4l2_device v4l2_dev;
>> + struct media_device mdev;
>> + struct media_pipeline pipe;
>> +
>> + /* IRQ lock for node state and DMA queues */
>> + spinlock_t state_lock;
>> + bool job_ready;
>> + bool job_queued;
>> +
>> + /* parent device */
>> + struct platform_device *pdev;
>> + /* subdevice async Notifier */
>> + struct v4l2_async_notifier notifier;
>> +
>> + /* Source sub device */
>> + struct v4l2_subdev *source_sd;
>> + /* Source subdev's pad */
>> + u32 source_pad;
>> + /* fwnode handle for the source's endpoint */
>> + struct fwnode_handle *remote_ep_fwnode;
>> +
>> + struct cfe_node node[NUM_NODES];
>> + DECLARE_BITMAP(node_flags, NUM_STATES * NUM_NODES);
>> +
>> + struct csi2_device csi2;
>> + struct pisp_fe_device fe;
>> +
>> + int fe_csi2_channel;
>> +
>> + /* Mask of enabled streams */
>> + u64 streams_mask;
>> +};
>> +
>> +static inline bool is_fe_enabled(struct cfe_device *cfe)
>> +{
>> + return cfe->fe_csi2_channel != -1;
>> +}
>> +
>> +static inline struct cfe_device *to_cfe_device(struct v4l2_device *v4l2_dev)
>> +{
>> + return container_of(v4l2_dev, struct cfe_device, v4l2_dev);
>> +}
>> +
>> +static inline u32 cfg_reg_read(struct cfe_device *cfe, u32 offset)
>> +{
>> + return readl(cfe->mipi_cfg_base + offset);
>> +}
>> +
>> +static inline void cfg_reg_write(struct cfe_device *cfe, u32 offset, u32 val)
>> +{
>> + writel(val, cfe->mipi_cfg_base + offset);
>> +}
>> +
>> +static bool check_state(struct cfe_device *cfe, unsigned long state,
>> + unsigned int node_id)
>> +{
>> + unsigned long bit;
>> +
>> + for_each_set_bit(bit, &state, sizeof(state)) {
>> + if (!test_bit(bit + (node_id * NUM_STATES), cfe->node_flags))
>> + return false;
>> + }
>
> A newline here would benice.
Sure.
> I'd drop the braces, too, up to you.
>
>> + return true;
>> +}
>> +
>> +static void set_state(struct cfe_device *cfe, unsigned long state,
>> + unsigned int node_id)
>> +{
>> + unsigned long bit;
>> +
>> + for_each_set_bit(bit, &state, sizeof(state))
>> + set_bit(bit + (node_id * NUM_STATES), cfe->node_flags);
>> +}
>> +
>> +static void clear_state(struct cfe_device *cfe, unsigned long state,
>> + unsigned int node_id)
>> +{
>> + unsigned long bit;
>> +
>> + for_each_set_bit(bit, &state, sizeof(state))
>> + clear_bit(bit + (node_id * NUM_STATES), cfe->node_flags);
>> +}
>> +
>> +static bool test_any_node(struct cfe_device *cfe, unsigned long cond)
>> +{
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + if (check_state(cfe, cond, i))
>> + return true;
>> + }
>> +
>> + return false;
>> +}
>> +
>> +static bool test_all_nodes(struct cfe_device *cfe, unsigned long precond,
>> + unsigned long cond)
>> +{
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + if (check_state(cfe, precond, i)) {
>> + if (!check_state(cfe, cond, i))
>> + return false;
>> + }
>> + }
>> +
>> + return true;
>> +}
>> +
>> +static int mipi_cfg_regs_show(struct seq_file *s, void *data)
>> +{
>> + struct cfe_device *cfe = s->private;
>> + int ret;
>> +
>> + ret = pm_runtime_resume_and_get(&cfe->pdev->dev);
>> + if (ret)
>> + return ret;
>> +
>> +#define DUMP(reg) seq_printf(s, #reg " \t0x%08x\n", cfg_reg_read(cfe, reg))
>> + DUMP(MIPICFG_CFG);
>> + DUMP(MIPICFG_INTR);
>> + DUMP(MIPICFG_INTE);
>> + DUMP(MIPICFG_INTF);
>> + DUMP(MIPICFG_INTS);
>> +#undef DUMP
>> +
>> + pm_runtime_put(&cfe->pdev->dev);
>> +
>> + return 0;
>> +}
>> +
>> +DEFINE_SHOW_ATTRIBUTE(mipi_cfg_regs);
>> +
>> +/* Format setup functions */
>> +const struct cfe_fmt *find_format_by_code(u32 code)
>> +{
>> + for (unsigned int i = 0; i < ARRAY_SIZE(formats); i++) {
>> + if (formats[i].code == code)
>> + return &formats[i];
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +const struct cfe_fmt *find_format_by_pix(u32 pixelformat)
>> +{
>> + for (unsigned int i = 0; i < ARRAY_SIZE(formats); i++) {
>> + if (formats[i].fourcc == pixelformat)
>> + return &formats[i];
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +static const struct cfe_fmt *find_format_by_code_and_fourcc(u32 code, u32 fourcc)
>> +{
>> + for (unsigned int i = 0; i < ARRAY_SIZE(formats); i++) {
>> + if (formats[i].code == code && formats[i].fourcc == fourcc)
>> + return &formats[i];
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +/*
>> + * Given the mbus code, find the 16 bit remapped code. Returns 0 if no remap
>> + * possible.
>> + */
>> +u32 cfe_find_16bit_code(u32 code)
>> +{
>> + const struct cfe_fmt *cfe_fmt;
>> +
>> + cfe_fmt = find_format_by_code(code);
>> +
>> + if (!cfe_fmt || !cfe_fmt->remap[CFE_REMAP_16BIT])
>> + return 0;
>> +
>> + cfe_fmt = find_format_by_pix(cfe_fmt->remap[CFE_REMAP_16BIT]);
>> + if (!cfe_fmt)
>> + return 0;
>> +
>> + return cfe_fmt->code;
>> +}
>> +
>> +/*
>> + * Given the mbus code, find the 8 bit compressed code. Returns 0 if no remap
>> + * possible.
>> + */
>> +u32 cfe_find_compressed_code(u32 code)
>> +{
>> + const struct cfe_fmt *cfe_fmt;
>> +
>> + cfe_fmt = find_format_by_code(code);
>> +
>> + if (!cfe_fmt || !cfe_fmt->remap[CFE_REMAP_COMPRESSED])
>> + return 0;
>> +
>> + cfe_fmt = find_format_by_pix(cfe_fmt->remap[CFE_REMAP_COMPRESSED]);
>> + if (!cfe_fmt)
>> + return 0;
>> +
>> + return cfe_fmt->code;
>> +}
>> +
>> +static void cfe_calc_vid_format_size_bpl(struct cfe_device *cfe,
>> + const struct cfe_fmt *fmt,
>> + struct v4l2_format *f)
>> +{
>> + unsigned int min_bytesperline;
>> +
>> + v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2,
>> + &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0, 0);
>> +
>> + min_bytesperline =
>> + ALIGN((f->fmt.pix.width * fmt->depth) >> 3, BPL_ALIGNMENT);
>> +
>> + if (f->fmt.pix.bytesperline > min_bytesperline &&
>> + f->fmt.pix.bytesperline <= MAX_BYTESPERLINE)
>> + f->fmt.pix.bytesperline =
>> + ALIGN(f->fmt.pix.bytesperline, BPL_ALIGNMENT);
>> + else
>> + f->fmt.pix.bytesperline = min_bytesperline;
>> +
>> + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
>> +
>> + cfe_dbg("%s: %p4cc size: %ux%u bpl:%u img_size:%u\n", __func__,
>> + &f->fmt.pix.pixelformat, f->fmt.pix.width, f->fmt.pix.height,
>> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
>> +}
>> +
>> +static void cfe_calc_meta_format_size_bpl(struct cfe_device *cfe,
>> + const struct cfe_fmt *fmt,
>> + struct v4l2_format *f)
>> +{
>> + v4l_bound_align_image(&f->fmt.meta.width, MIN_META_WIDTH, MAX_WIDTH, 2,
>> + &f->fmt.meta.height, MIN_META_HEIGHT, MAX_HEIGHT, 0,
>> + 0);
>> +
>> + f->fmt.meta.bytesperline = (f->fmt.meta.width * fmt->depth) >> 3;
>> + f->fmt.meta.buffersize = f->fmt.meta.height * f->fmt.pix.bytesperline;
>> +
>> + cfe_dbg("%s: %p4cc size: %ux%u bpl:%u buf_size:%u\n", __func__,
>> + &f->fmt.meta.dataformat, f->fmt.meta.width, f->fmt.meta.height,
>> + f->fmt.meta.bytesperline, f->fmt.meta.buffersize);
>> +}
>> +
>> +static void cfe_schedule_next_csi2_job(struct cfe_device *cfe)
>> +{
>> + struct cfe_buffer *buf;
>> + dma_addr_t addr;
>> +
>> + for (unsigned int i = 0; i < CSI2_NUM_CHANNELS; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> + unsigned int stride, size;
>> +
>> + if (!check_state(cfe, NODE_STREAMING, i))
>> + continue;
>> +
>> + buf = list_first_entry(&node->dma_queue, struct cfe_buffer,
>> + list);
>> + node->next_frm = buf;
>> + list_del(&buf->list);
>> +
>> + trace_cfe_csi2_schedule(node->id, &buf->vb.vb2_buf);
>> +
>> + if (is_meta_node(node)) {
>> + size = node->meta_fmt.fmt.meta.buffersize;
>> + /* We use CSI2_CH_CTRL_PACK_BYTES, so stride == 0 */
>> + stride = 0;
>> + } else {
>> + size = node->vid_fmt.fmt.pix.sizeimage;
>> + stride = node->vid_fmt.fmt.pix.bytesperline;
>> + }
>> +
>> + addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
>> + csi2_set_buffer(&cfe->csi2, node->id, addr, stride, size);
>> + }
>> +}
>> +
>> +static void cfe_schedule_next_pisp_job(struct cfe_device *cfe)
>> +{
>> + struct vb2_buffer *vb2_bufs[FE_NUM_PADS] = { 0 };
>> + struct cfe_config_buffer *config_buf;
>> + struct cfe_buffer *buf;
>> +
>> + for (unsigned int i = CSI2_NUM_CHANNELS; i < NUM_NODES; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> +
>> + if (!check_state(cfe, NODE_STREAMING, i))
>> + continue;
>> +
>> + buf = list_first_entry(&node->dma_queue, struct cfe_buffer,
>> + list);
>> +
>> + trace_cfe_fe_schedule(node->id, &buf->vb.vb2_buf);
>> +
>> + node->next_frm = buf;
>> + vb2_bufs[node_desc[i].link_pad] = &buf->vb.vb2_buf;
>> + list_del(&buf->list);
>> + }
>> +
>> + config_buf = to_cfe_config_buffer(cfe->node[FE_CONFIG].next_frm);
>> + pisp_fe_submit_job(&cfe->fe, vb2_bufs, &config_buf->config);
>> +}
>> +
>> +static bool cfe_check_job_ready(struct cfe_device *cfe)
>> +{
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> +
>> + if (!check_state(cfe, NODE_ENABLED, i))
>> + continue;
>> +
>> + if (list_empty(&node->dma_queue))
>> + return false;
>> + }
>> +
>> + return true;
>> +}
>> +
>> +static void cfe_prepare_next_job(struct cfe_device *cfe)
>> +{
>> + trace_cfe_prepare_next_job(is_fe_enabled(cfe));
>> +
>> + cfe->job_queued = true;
>> + cfe_schedule_next_csi2_job(cfe);
>> + if (is_fe_enabled(cfe))
>> + cfe_schedule_next_pisp_job(cfe);
>> +
>> + /* Flag if another job is ready after this. */
>> + cfe->job_ready = cfe_check_job_ready(cfe);
>> +}
>> +
>> +static void cfe_process_buffer_complete(struct cfe_node *node,
>> + enum vb2_buffer_state state)
>> +{
>> + trace_cfe_buffer_complete(node->id, &node->cur_frm->vb);
>> +
>> + node->cur_frm->vb.sequence = node->fs_count - 1;
>> + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, state);
>> +}
>> +
>> +static void cfe_queue_event_sof(struct cfe_node *node)
>> +{
>> + struct v4l2_event event = {
>> + .type = V4L2_EVENT_FRAME_SYNC,
>> + .u.frame_sync.frame_sequence = node->fs_count - 1,
>> + };
>> +
>> + v4l2_event_queue(&node->video_dev, &event);
>> +}
>> +
>> +static void cfe_sof_isr_handler(struct cfe_node *node)
>> +{
>> + struct cfe_device *cfe = node->cfe;
>> + bool matching_fs = true;
>> +
>> + trace_cfe_frame_start(node->id, node->fs_count);
>> +
>> + /*
>> + * If the sensor is producing unexpected frame event ordering over a
>> + * sustained period of time, guard against the possibility of coming
>> + * here and orphaning the cur_frm if it's not been dequeued already.
>> + * Unfortunately, there is not enough hardware state to tell if this
>> + * may have occurred.
>> + */
>> + if (WARN(node->cur_frm, "%s: [%s] Orphanded frame at seq %u\n",
>> + __func__, node_desc[node->id].name, node->fs_count))
>> + cfe_process_buffer_complete(node, VB2_BUF_STATE_ERROR);
>> +
>> + node->cur_frm = node->next_frm;
>> + node->next_frm = NULL;
>> + node->fs_count++;
>> +
>> + node->ts = ktime_get_ns();
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + if (!check_state(cfe, NODE_STREAMING, i) || i == node->id)
>> + continue;
>> + /*
>> + * This checks if any other node has seen a FS. If yes, use the
>> + * same timestamp, eventually across all node buffers.
>> + */
>> + if (cfe->node[i].fs_count >= node->fs_count)
>> + node->ts = cfe->node[i].ts;
>> + /*
>> + * This checks if all other node have seen a matching FS. If
>> + * yes, we can flag another job to be queued.
>> + */
>> + if (matching_fs && cfe->node[i].fs_count != node->fs_count)
>> + matching_fs = false;
>> + }
>> +
>> + if (matching_fs)
>> + cfe->job_queued = false;
>> +
>> + if (node->cur_frm)
>> + node->cur_frm->vb.vb2_buf.timestamp = node->ts;
>> +
>> + set_state(cfe, FS_INT, node->id);
>> + clear_state(cfe, FE_INT, node->id);
>> +
>> + if (is_image_output_node(node))
>> + cfe_queue_event_sof(node);
>> +}
>> +
>> +static void cfe_eof_isr_handler(struct cfe_node *node)
>> +{
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + trace_cfe_frame_end(node->id, node->fs_count - 1);
>> +
>> + if (node->cur_frm)
>> + cfe_process_buffer_complete(node, VB2_BUF_STATE_DONE);
>> +
>> + node->cur_frm = NULL;
>> + set_state(cfe, FE_INT, node->id);
>> + clear_state(cfe, FS_INT, node->id);
>> +}
>> +
>> +static irqreturn_t cfe_isr(int irq, void *dev)
>> +{
>> + struct cfe_device *cfe = dev;
>> + bool sof[NUM_NODES] = { 0 }, eof[NUM_NODES] = { 0 };
>> + u32 sts;
>> +
>> + sts = cfg_reg_read(cfe, MIPICFG_INTS);
>> +
>> + if (sts & MIPICFG_INT_CSI_DMA)
>> + csi2_isr(&cfe->csi2, sof, eof);
>> +
>> + if (sts & MIPICFG_INT_PISP_FE)
>> + pisp_fe_isr(&cfe->fe, sof + CSI2_NUM_CHANNELS,
>> + eof + CSI2_NUM_CHANNELS);
>> +
>> + spin_lock(&cfe->state_lock);
>> +
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> +
>> + /*
>> + * The check_state(NODE_STREAMING) is to ensure we do not loop
>> + * over the CSI2_CHx nodes when the FE is active since they
>> + * generate interrupts even though the node is not streaming.
>> + */
>> + if (!check_state(cfe, NODE_STREAMING, i) || !(sof[i] || eof[i]))
>> + continue;
>> +
>> + /*
>> + * There are 3 cases where we could get FS + FE_ACK at
>> + * the same time:
>> + * 1) FE of the current frame, and FS of the next frame.
>> + * 2) FS + FE of the same frame.
>> + * 3) FE of the current frame, and FS + FE of the next
>> + * frame. To handle this, see the sof handler below.
>> + *
>> + * (1) is handled implicitly by the ordering of the FE and FS
>> + * handlers below.
>> + */
>> + if (eof[i]) {
>> + /*
>> + * The condition below tests for (2). Run the FS handler
>> + * first before the FE handler, both for the current
>> + * frame.
>> + */
>> + if (sof[i] && !check_state(cfe, FS_INT, i)) {
>> + cfe_sof_isr_handler(node);
>> + sof[i] = false;
>> + }
>> +
>> + cfe_eof_isr_handler(node);
>> + }
>> +
>> + if (sof[i]) {
>> + /*
>> + * The condition below tests for (3). In such cases, we
>> + * come in here with FS flag set in the node state from
>> + * the previous frame since it only gets cleared in
>> + * eof_isr_handler(). Handle the FE for the previous
>> + * frame first before the FS handler for the current
>> + * frame.
>> + */
>> + if (check_state(cfe, FS_INT, node->id) &&
>> + !check_state(cfe, FE_INT, node->id)) {
>> + cfe_dbg("%s: [%s] Handling missing previous FE interrupt\n",
>> + __func__, node_desc[node->id].name);
>> + cfe_eof_isr_handler(node);
>> + }
>> +
>> + cfe_sof_isr_handler(node);
>> + }
>> +
>> + if (!cfe->job_queued && cfe->job_ready)
>> + cfe_prepare_next_job(cfe);
>> + }
>> +
>> + spin_unlock(&cfe->state_lock);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +/*
>> + * Stream helpers
>> + */
>> +
>> +static int cfe_get_vc_dt_fallback(struct cfe_device *cfe, u8 *vc, u8 *dt)
>> +{
>> + struct v4l2_subdev_state *state;
>> + struct v4l2_mbus_framefmt *fmt;
>> + const struct cfe_fmt *cfe_fmt;
>> +
>> + state = v4l2_subdev_get_locked_active_state(&cfe->csi2.sd);
>> +
>> + fmt = v4l2_subdev_state_get_format(state, CSI2_PAD_SINK, 0);
>> + if (!fmt)
>> + return -EINVAL;
>> +
>> + cfe_fmt = find_format_by_code(fmt->code);
>> + if (!cfe_fmt)
>> + return -EINVAL;
>> +
>> + *vc = 0;
>> + *dt = cfe_fmt->csi_dt;
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_get_vc_dt(struct cfe_device *cfe, unsigned int channel, u8 *vc,
>> + u8 *dt)
>> +{
>> + struct v4l2_mbus_frame_desc remote_desc;
>> + struct v4l2_subdev_state *state;
>> + u32 sink_stream;
>> + unsigned int i;
>> + int ret;
>> +
>> + state = v4l2_subdev_get_locked_active_state(&cfe->csi2.sd);
>> +
>> + ret = v4l2_subdev_routing_find_opposite_end(&state->routing,
>> + CSI2_PAD_FIRST_SOURCE + channel, 0, NULL, &sink_stream);
>> + if (ret)
>> + return ret;
>> +
>> + ret = v4l2_subdev_call(cfe->source_sd, pad, get_frame_desc,
>> + cfe->source_pad, &remote_desc);
>> + if (ret == -ENOIOCTLCMD) {
>> + cfe_dbg("source does not support get_frame_desc, use fallback\n");
>> + return cfe_get_vc_dt_fallback(cfe, vc, dt);
>> + } else if (ret) {
>> + cfe_err("Failed to get frame descriptor\n");
>> + return ret;
>> + }
>> +
>> + if (remote_desc.type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
>> + cfe_err("Frame descriptor does not describe CSI-2 link");
>> + return -EINVAL;
>> + }
>> +
>> + for (i = 0; i < remote_desc.num_entries; i++) {
>> + if (remote_desc.entry[i].stream == sink_stream)
>> + break;
>> + }
>> +
>> + if (i == remote_desc.num_entries) {
>> + cfe_err("Stream %u not found in remote frame desc\n",
>> + sink_stream);
>> + return -EINVAL;
>> + }
>> +
>> + *vc = remote_desc.entry[i].bus.csi2.vc;
>> + *dt = remote_desc.entry[i].bus.csi2.dt;
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_start_channel(struct cfe_node *node)
>> +{
>> + struct cfe_device *cfe = node->cfe;
>> + struct v4l2_subdev_state *state;
>> + struct v4l2_mbus_framefmt *source_fmt;
>> + const struct cfe_fmt *fmt;
>> + unsigned long flags;
>> + bool start_fe;
>> + int ret;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>
> This looks like a development time leftover. There are quite a few such
> prints that provide little information anyway. How about removing them all?
These are very valuable when testing, fixing or improving the driver. If
I were to remove them, I would just have to add them back whenever I'd
be doing something with the driver and things would not work perfectly.
The debug prints we have are all low frequency. There's a bunch printed
when starting the streaming and when stopping it, but the debug prints
are not used while streaming is on-going, and instead we have trace
events for that.
>> +
>> + start_fe = is_fe_enabled(cfe) &&
>> + test_all_nodes(cfe, NODE_ENABLED, NODE_STREAMING);
>> +
>> + state = v4l2_subdev_get_locked_active_state(&cfe->csi2.sd);
>> +
>> + if (start_fe) {
>> + unsigned int width, height;
>> + u8 vc, dt;
>> +
>> + cfe_dbg("%s: %s using csi2 channel %d\n", __func__,
>> + node_desc[FE_OUT0].name, cfe->fe_csi2_channel);
>> +
>> + ret = cfe_get_vc_dt(cfe, cfe->fe_csi2_channel, &vc, &dt);
>> + if (ret)
>> + return ret;
>> +
>> + source_fmt = v4l2_subdev_state_get_format(state,
>> + node_desc[cfe->fe_csi2_channel].link_pad);
>> + fmt = find_format_by_code(source_fmt->code);
>> +
>> + width = source_fmt->width;
>> + height = source_fmt->height;
>> +
>> + /* Must have a valid CSI2 datatype. */
>> + WARN_ON(!fmt->csi_dt);
>> +
>> + /*
>> + * Start the associated CSI2 Channel as well.
>> + *
>> + * Must write to the ADDR register to latch the ctrl values
>> + * even if we are connected to the front end. Once running,
>> + * this is handled by the CSI2 AUTO_ARM mode.
>> + */
>> + csi2_start_channel(&cfe->csi2, cfe->fe_csi2_channel,
>> + CSI2_MODE_FE_STREAMING,
>> + true, false, width, height, vc, dt);
>> + csi2_set_buffer(&cfe->csi2, cfe->fe_csi2_channel, 0, 0, -1);
>> + pisp_fe_start(&cfe->fe);
>> + }
>> +
>> + if (is_csi2_node(node)) {
>> + unsigned int width = 0, height = 0;
>> + u8 vc, dt;
>> +
>> + ret = cfe_get_vc_dt(cfe, node->id, &vc, &dt);
>> + if (ret) {
>> + if (start_fe) {
>> + csi2_stop_channel(&cfe->csi2, cfe->fe_csi2_channel);
>> + pisp_fe_stop(&cfe->fe);
>> + }
>> +
>> + return ret;
>> + }
>> +
>> + u32 mode = CSI2_MODE_NORMAL;
>> +
>> + source_fmt = v4l2_subdev_state_get_format(state,
>> + node_desc[node->id].link_pad);
>> + fmt = find_format_by_code(source_fmt->code);
>> +
>> + /* Must have a valid CSI2 datatype. */
>> + WARN_ON(!fmt->csi_dt);
>> +
>> + if (is_image_output_node(node)) {
>> + u32 pixfmt;
>> +
>> + width = source_fmt->width;
>> + height = source_fmt->height;
>> +
>> + pixfmt = node->vid_fmt.fmt.pix.pixelformat;
>> +
>> + if (pixfmt == fmt->remap[CFE_REMAP_16BIT]) {
>> + mode = CSI2_MODE_REMAP;
>> + } else if (pixfmt == fmt->remap[CFE_REMAP_COMPRESSED]) {
>> + mode = CSI2_MODE_COMPRESSED;
>> + csi2_set_compression(&cfe->csi2, node->id,
>> + CSI2_COMPRESSION_DELTA, 0,
>> + 0);
>> + }
>> + }
>> + /* Unconditionally start this CSI2 channel. */
>> + csi2_start_channel(&cfe->csi2, node->id,
>> + mode,
>> + /* Auto arm */
>> + false,
>> + /* Pack bytes */
>> + is_meta_node(node) ? true : false,
>> + width, height, vc, dt);
>> + }
>> +
>> + spin_lock_irqsave(&cfe->state_lock, flags);
>> + if (cfe->job_ready && test_all_nodes(cfe, NODE_ENABLED, NODE_STREAMING))
>> + cfe_prepare_next_job(cfe);
>> + spin_unlock_irqrestore(&cfe->state_lock, flags);
>> +
>> + return 0;
>> +}
>> +
>> +static void cfe_stop_channel(struct cfe_node *node, bool fe_stop)
>> +{
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + cfe_dbg("%s: [%s] fe_stop %u\n", __func__, node_desc[node->id].name,
>> + fe_stop);
>> +
>> + if (fe_stop) {
>> + csi2_stop_channel(&cfe->csi2, cfe->fe_csi2_channel);
>> + pisp_fe_stop(&cfe->fe);
>> + }
>> +
>> + if (is_csi2_node(node))
>> + csi2_stop_channel(&cfe->csi2, node->id);
>> +}
>> +
>> +static void cfe_return_buffers(struct cfe_node *node,
>> + enum vb2_buffer_state state)
>> +{
>> + struct cfe_device *cfe = node->cfe;
>> + struct cfe_buffer *buf, *tmp;
>> + unsigned long flags;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + spin_lock_irqsave(&cfe->state_lock, flags);
>> + list_for_each_entry_safe(buf, tmp, &node->dma_queue, list) {
>> + list_del(&buf->list);
>> + trace_cfe_return_buffer(node->id, buf->vb.vb2_buf.index, 2);
>> + vb2_buffer_done(&buf->vb.vb2_buf, state);
>> + }
>> +
>> + if (node->cur_frm) {
>> + trace_cfe_return_buffer(node->id, node->cur_frm->vb.vb2_buf.index, 0);
>> + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, state);
>> + }
>> + if (node->next_frm && node->cur_frm != node->next_frm) {
>> + trace_cfe_return_buffer(node->id, node->next_frm->vb.vb2_buf.index, 1);
>> + vb2_buffer_done(&node->next_frm->vb.vb2_buf, state);
>> + }
>> +
>> + node->cur_frm = NULL;
>> + node->next_frm = NULL;
>> + spin_unlock_irqrestore(&cfe->state_lock, flags);
>> +}
>> +
>> +/*
>> + * vb2 ops
>> + */
>> +
>> +static int cfe_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
>> + unsigned int *nplanes, unsigned int sizes[],
>> + struct device *alloc_devs[])
>> +{
>> + struct cfe_node *node = vb2_get_drv_priv(vq);
>> + struct cfe_device *cfe = node->cfe;
>> + unsigned int size = is_image_node(node) ?
>> + node->vid_fmt.fmt.pix.sizeimage :
>> + node->meta_fmt.fmt.meta.buffersize;
>> +
>> + cfe_dbg("%s: [%s] type:%u\n", __func__, node_desc[node->id].name,
>> + node->buffer_queue.type);
>> +
>> + if (vq->max_num_buffers + *nbuffers < 3)
>> + *nbuffers = 3 - vq->max_num_buffers;
>> +
>> + if (*nplanes) {
>> + if (sizes[0] < size) {
>> + cfe_err("sizes[0] %i < size %u\n", sizes[0], size);
>> + return -EINVAL;
>> + }
>> + size = sizes[0];
>> + }
>> +
>> + *nplanes = 1;
>> + sizes[0] = size;
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_buffer_prepare(struct vb2_buffer *vb)
>> +{
>> + struct cfe_node *node = vb2_get_drv_priv(vb->vb2_queue);
>> + struct cfe_device *cfe = node->cfe;
>> + struct cfe_buffer *buf = to_cfe_buffer(vb);
>> + unsigned long size;
>> +
>> + trace_cfe_buffer_prepare(node->id, vb);
>> +
>> + size = is_image_node(node) ? node->vid_fmt.fmt.pix.sizeimage :
>> + node->meta_fmt.fmt.meta.buffersize;
>> + if (vb2_plane_size(vb, 0) < size) {
>> + cfe_err("data will not fit into plane (%lu < %lu)\n",
>> + vb2_plane_size(vb, 0), size);
>> + return -EINVAL;
>> + }
>> +
>> + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
>> +
>> + if (node->id == FE_CONFIG) {
>> + struct cfe_config_buffer *b = to_cfe_config_buffer(buf);
>> + void *addr = vb2_plane_vaddr(vb, 0);
>> +
>> + memcpy(&b->config, addr, sizeof(struct pisp_fe_config));
>> + return pisp_fe_validate_config(&cfe->fe, &b->config,
>> + &cfe->node[FE_OUT0].vid_fmt,
>> + &cfe->node[FE_OUT1].vid_fmt);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void cfe_buffer_queue(struct vb2_buffer *vb)
>> +{
>> + struct cfe_node *node = vb2_get_drv_priv(vb->vb2_queue);
>> + struct cfe_device *cfe = node->cfe;
>> + struct cfe_buffer *buf = to_cfe_buffer(vb);
>> + unsigned long flags;
>> + bool schedule_now;
>> +
>> + spin_lock_irqsave(&cfe->state_lock, flags);
>> +
>> + list_add_tail(&buf->list, &node->dma_queue);
>> +
>> + if (!cfe->job_ready)
>> + cfe->job_ready = cfe_check_job_ready(cfe);
>> +
>> + schedule_now = !cfe->job_queued && cfe->job_ready &&
>> + test_all_nodes(cfe, NODE_ENABLED, NODE_STREAMING);
>> +
>> + trace_cfe_buffer_queue(node->id, vb, schedule_now);
>> +
>> + if (schedule_now)
>> + cfe_prepare_next_job(cfe);
>> +
>> + spin_unlock_irqrestore(&cfe->state_lock, flags);
>> +}
>> +
>> +static s64 cfe_get_source_link_freq(struct cfe_device *cfe)
>> +{
>> + struct v4l2_subdev_state *state;
>> + s64 link_freq;
>> + u32 bpp;
>> +
>> + state = v4l2_subdev_get_locked_active_state(&cfe->csi2.sd);
>> +
>> + /*
>> + * v4l2_get_link_freq() uses V4L2_CID_LINK_FREQ first, and falls back
>> + * to V4L2_CID_PIXEL_RATE if V4L2_CID_LINK_FREQ is not available.
>> + *
>> + * With multistream input there is no single pixel rate, and thus we
>> + * cannot use V4L2_CID_PIXEL_RATE, so we pass 0 as the bpp which
>> + * causes v4l2_get_link_freq() to return an error if it falls back to
>> + * V4L2_CID_PIXEL_RATE.
>> + */
>> +
>> + if (state->routing.num_routes == 1) {
>> + struct v4l2_subdev_route *route = &state->routing.routes[0];
>> + struct v4l2_mbus_framefmt *source_fmt;
>> + const struct cfe_fmt *fmt;
>> +
>> + source_fmt = v4l2_subdev_state_get_format(state,
>> + route->sink_pad, route->sink_stream);
>> +
>> + fmt = find_format_by_code(source_fmt->code);
>> + if (!fmt)
>> + return -EINVAL;
>> +
>> + bpp = fmt->depth;
>> + } else {
>> + bpp = 0;
>> + }
>> +
>> + link_freq = v4l2_get_link_freq(cfe->source_sd->ctrl_handler, bpp,
>> + 2 * cfe->csi2.dphy.active_lanes);
>> + if (link_freq < 0)
>> + cfe_err("failed to get link freq for subdev '%s'\n",
>> + cfe->source_sd->name);
>> +
>> + return link_freq;
>> +}
>> +
>> +static int cfe_start_streaming(struct vb2_queue *vq, unsigned int count)
>> +{
>> + struct v4l2_mbus_config mbus_config = { 0 };
>> + struct cfe_node *node = vb2_get_drv_priv(vq);
>> + struct cfe_device *cfe = node->cfe;
>> + struct v4l2_subdev_state *state;
>> + struct v4l2_subdev_route *route;
>> + s64 link_freq;
>> + int ret;
>> +
>> + cfe_dbg("%s: [%s] begin.\n", __func__, node_desc[node->id].name);
>> +
>> + if (!check_state(cfe, NODE_ENABLED, node->id)) {
>> + cfe_err("%s node link is not enabled.\n",
>> + node_desc[node->id].name);
>> + ret = -EINVAL;
>> + goto err_streaming;
>> + }
>> +
>> + ret = pm_runtime_resume_and_get(&cfe->pdev->dev);
>> + if (ret < 0) {
>> + cfe_err("pm_runtime_resume_and_get failed\n");
>> + goto err_streaming;
>> + }
>> +
>> + /* When using the Frontend, we must enable the FE_CONFIG node. */
>> + if (is_fe_enabled(cfe) &&
>> + !check_state(cfe, NODE_ENABLED, cfe->node[FE_CONFIG].id)) {
>> + cfe_err("FE enabled, but FE_CONFIG node is not\n");
>> + ret = -EINVAL;
>> + goto err_pm_put;
>> + }
>> +
>> + ret = media_pipeline_start(&node->pad, &cfe->pipe);
>> + if (ret < 0) {
>> + cfe_err("Failed to start media pipeline: %d\n", ret);
>> + goto err_pm_put;
>> + }
>> +
>> + state = v4l2_subdev_lock_and_get_active_state(&cfe->csi2.sd);
>> +
>> + clear_state(cfe, FS_INT | FE_INT, node->id);
>> + set_state(cfe, NODE_STREAMING, node->id);
>> + node->fs_count = 0;
>> +
>> + ret = cfe_start_channel(node);
>> + if (ret)
>> + goto err_unlock_state;
>> +
>> + if (!test_all_nodes(cfe, NODE_ENABLED, NODE_STREAMING)) {
>> + cfe_dbg("Not all nodes are set to streaming yet!\n");
>> + v4l2_subdev_unlock_state(state);
>> + return 0;
>> + }
>> +
>> + cfg_reg_write(cfe, MIPICFG_CFG, MIPICFG_CFG_SEL_CSI);
>> + cfg_reg_write(cfe, MIPICFG_INTE, MIPICFG_INT_CSI_DMA | MIPICFG_INT_PISP_FE);
>> +
>> + ret = v4l2_subdev_call(cfe->source_sd, pad, get_mbus_config, 0,
>> + &mbus_config);
>> + if (ret < 0 && ret != -ENOIOCTLCMD) {
>> + cfe_err("g_mbus_config failed\n");
>> + goto err_clear_inte;
>> + }
>> +
>> + cfe->csi2.dphy.active_lanes = mbus_config.bus.mipi_csi2.num_data_lanes;
>> + if (!cfe->csi2.dphy.active_lanes)
>> + cfe->csi2.dphy.active_lanes = cfe->csi2.dphy.max_lanes;
>> + if (cfe->csi2.dphy.active_lanes > cfe->csi2.dphy.max_lanes) {
>> + cfe_err("Device has requested %u data lanes, which is >%u configured in DT\n",
>> + cfe->csi2.dphy.active_lanes, cfe->csi2.dphy.max_lanes);
>> + ret = -EINVAL;
>> + goto err_clear_inte;
>> + }
>> +
>> + cfe_dbg("Configuring CSI-2 block - %u data lanes\n",
>> + cfe->csi2.dphy.active_lanes);
>> +
>> + link_freq = cfe_get_source_link_freq(cfe);
>> + if (link_freq < 0)
>> + goto err_clear_inte;
>> +
>> + cfe->csi2.dphy.dphy_rate = div_s64(link_freq * 2, 1000000);
>> + cfe_dbg("Using a link rate of %u Mbps\n", cfe->csi2.dphy.dphy_rate);
>> + csi2_open_rx(&cfe->csi2);
>> +
>> + cfe_dbg("Starting sensor streaming\n");
>> +
>> + cfe->streams_mask = 0;
>> +
>> + for_each_active_route(&state->routing, route)
>> + cfe->streams_mask |= BIT_ULL(route->sink_stream);
>> +
>> + ret = v4l2_subdev_enable_streams(cfe->source_sd, cfe->source_pad, cfe->streams_mask);
>> + if (ret) {
>> + cfe_err("stream on failed in subdev\n");
>> + goto err_disable_cfe;
>> + }
>> +
>> + v4l2_subdev_unlock_state(state);
>> +
>> + cfe_dbg("%s: [%s] end.\n", __func__, node_desc[node->id].name);
>> +
>> + return 0;
>> +
>> +err_disable_cfe:
>> + csi2_close_rx(&cfe->csi2);
>> +err_clear_inte:
>> + cfg_reg_write(cfe, MIPICFG_INTE, 0);
>> +
>> + cfe_stop_channel(node,
>> + is_fe_enabled(cfe) && test_all_nodes(cfe, NODE_ENABLED,
>> + NODE_STREAMING));
>> +err_unlock_state:
>> + v4l2_subdev_unlock_state(state);
>> + media_pipeline_stop(&node->pad);
>> +err_pm_put:
>> + pm_runtime_put(&cfe->pdev->dev);
>> +err_streaming:
>> + cfe_return_buffers(node, VB2_BUF_STATE_QUEUED);
>> + clear_state(cfe, NODE_STREAMING, node->id);
>> +
>> + return ret;
>> +}
>> +
>> +static void cfe_stop_streaming(struct vb2_queue *vq)
>> +{
>> + struct cfe_node *node = vb2_get_drv_priv(vq);
>> + struct cfe_device *cfe = node->cfe;
>> + unsigned long flags;
>> + bool fe_stop;
>> +
>> + cfe_dbg("%s: [%s] begin.\n", __func__, node_desc[node->id].name);
>> +
>> + spin_lock_irqsave(&cfe->state_lock, flags);
>> + fe_stop = is_fe_enabled(cfe) &&
>> + test_all_nodes(cfe, NODE_ENABLED, NODE_STREAMING);
>> +
>> + cfe->job_ready = false;
>> + clear_state(cfe, NODE_STREAMING, node->id);
>> + spin_unlock_irqrestore(&cfe->state_lock, flags);
>> +
>> + cfe_stop_channel(node, fe_stop);
>> +
>> + if (!test_any_node(cfe, NODE_STREAMING)) {
>> + struct v4l2_subdev_state *state;
>> + int ret;
>> +
>> + state = v4l2_subdev_lock_and_get_active_state(&cfe->csi2.sd);
>> +
>> + ret = v4l2_subdev_disable_streams(cfe->source_sd,
>> + cfe->source_pad, cfe->streams_mask);
>> + if (ret)
>> + cfe_err("stream disable failed in subdev\n");
>> +
>> + v4l2_subdev_unlock_state(state);
>> +
>> + csi2_close_rx(&cfe->csi2);
>> +
>> + cfg_reg_write(cfe, MIPICFG_INTE, 0);
>> + }
>> +
>> + media_pipeline_stop(&node->pad);
>> +
>> + /* Clear all queued buffers for the node */
>> + cfe_return_buffers(node, VB2_BUF_STATE_ERROR);
>> +
>> + pm_runtime_put(&cfe->pdev->dev);
>> +
>> + cfe_dbg("%s: [%s] end.\n", __func__, node_desc[node->id].name);
>> +}
>> +
>> +static const struct vb2_ops cfe_video_qops = {
>> + .wait_prepare = vb2_ops_wait_prepare,
>> + .wait_finish = vb2_ops_wait_finish,
>> + .queue_setup = cfe_queue_setup,
>> + .buf_prepare = cfe_buffer_prepare,
>> + .buf_queue = cfe_buffer_queue,
>> + .start_streaming = cfe_start_streaming,
>> + .stop_streaming = cfe_stop_streaming,
>> +};
>> +
>> +/*
>> + * v4l2 ioctl ops
>> + */
>> +
>> +static int cfe_querycap(struct file *file, void *priv,
>> + struct v4l2_capability *cap)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + strscpy(cap->driver, CFE_MODULE_NAME, sizeof(cap->driver));
>> + strscpy(cap->card, CFE_MODULE_NAME, sizeof(cap->card));
>> +
>> + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
>> + dev_name(&cfe->pdev->dev));
>
> This is set in V4L2 framework, no need to do so in the driver.
Indeed, I'll drop this.
>> +
>> + cap->capabilities |= V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_META_CAPTURE |
>> + V4L2_CAP_META_OUTPUT;
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_enum_fmt_vid_cap(struct file *file, void *priv,
>> + struct v4l2_fmtdesc *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> + unsigned int i, j;
>> +
>> + if (!node_supports_image_output(node))
>> + return -EINVAL;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + for (i = 0, j = 0; i < ARRAY_SIZE(formats); i++) {
>> + if (f->mbus_code && formats[i].code != f->mbus_code)
>> + continue;
>> +
>> + if (formats[i].flags & CFE_FORMAT_FLAG_META_OUT ||
>> + formats[i].flags & CFE_FORMAT_FLAG_META_CAP)
>> + continue;
>> +
>> + if (is_fe_node(node) &&
>> + !(formats[i].flags & CFE_FORMAT_FLAG_FE_OUT))
>> + continue;
>> +
>> + if (j == f->index) {
>> + f->pixelformat = formats[i].fourcc;
>> + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> + return 0;
>> + }
>> + j++;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static int cfe_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + if (!node_supports_image(node))
>> + return -EINVAL;
>> +
>> + *f = node->vid_fmt;
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_validate_fmt_vid_cap(struct cfe_node *node, struct v4l2_format *f)
>> +{
>> + struct cfe_device *cfe = node->cfe;
>> + const struct cfe_fmt *fmt;
>> +
>> + cfe_dbg("%s: [%s] %ux%u, V4L2 pix %p4cc\n", __func__,
>> + node_desc[node->id].name, f->fmt.pix.width, f->fmt.pix.height,
>> + &f->fmt.pix.pixelformat);
>> +
>> + if (!node_supports_image_output(node))
>> + return -EINVAL;
>> +
>> + /*
>> + * Default to a format that works for both CSI2 and FE.
>> + */
>> + fmt = find_format_by_pix(f->fmt.pix.pixelformat);
>> + if (!fmt)
>> + fmt = find_format_by_code(MEDIA_BUS_FMT_SBGGR10_1X10);
>> +
>> + f->fmt.pix.pixelformat = fmt->fourcc;
>> +
>> + if (is_fe_node(node) && fmt->remap[CFE_REMAP_16BIT]) {
>> + f->fmt.pix.pixelformat = fmt->remap[CFE_REMAP_16BIT];
>> + fmt = find_format_by_pix(f->fmt.pix.pixelformat);
>> + }
>> +
>> + f->fmt.pix.field = V4L2_FIELD_NONE;
>> +
>> + cfe_calc_vid_format_size_bpl(cfe, fmt, f);
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_s_fmt_vid_cap(struct file *file, void *priv,
>> + struct v4l2_format *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> + struct vb2_queue *q = &node->buffer_queue;
>> + int ret;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + if (vb2_is_busy(q))
>> + return -EBUSY;
>> +
>> + ret = cfe_validate_fmt_vid_cap(node, f);
>> + if (ret)
>> + return ret;
>> +
>> + node->vid_fmt = *f;
>> +
>> + cfe_dbg("%s: Set %ux%u, V4L2 pix %p4cc\n", __func__,
>> + node->vid_fmt.fmt.pix.width, node->vid_fmt.fmt.pix.height,
>> + &node->vid_fmt.fmt.pix.pixelformat);
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_try_fmt_vid_cap(struct file *file, void *priv,
>> + struct v4l2_format *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + return cfe_validate_fmt_vid_cap(node, f);
>> +}
>> +
>> +static int cfe_enum_fmt_meta(struct file *file, void *priv,
>> + struct v4l2_fmtdesc *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + if (!node_supports_meta(node))
>> + return -EINVAL;
>> +
>> + switch (node->id) {
>> + case CSI2_CH0...CSI2_CH3:
>> + f->flags = V4L2_FMT_FLAG_META_LINE_BASED;
>> +
>> + switch (f->index) {
>> + case 0:
>> + f->pixelformat = V4L2_META_FMT_GENERIC_8;
>> + return 0;
>> + case 1:
>> + f->pixelformat = V4L2_META_FMT_GENERIC_CSI2_10;
>> + return 0;
>> + case 2:
>> + f->pixelformat = V4L2_META_FMT_GENERIC_CSI2_12;
>> + return 0;
>> + default:
>> + return -EINVAL;
>> + }
>> + default:
>> + break;
>> + }
>> +
>> + if (f->index != 0)
>> + return -EINVAL;
>> +
>> + switch (node->id) {
>> + case FE_STATS:
>> + f->pixelformat = V4L2_META_FMT_RPI_FE_STATS;
>> + return 0;
>> + case FE_CONFIG:
>> + f->pixelformat = V4L2_META_FMT_RPI_FE_CFG;
>> + return 0;
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static int cfe_validate_fmt_meta(struct cfe_node *node, struct v4l2_format *f)
>> +{
>> + struct cfe_device *cfe = node->cfe;
>> + const struct cfe_fmt *fmt;
>> +
>> + switch (node->id) {
>> + case CSI2_CH0...CSI2_CH3:
>> + cfe_dbg("%s: [%s] %ux%u, V4L2 meta %p4cc\n", __func__,
>> + node_desc[node->id].name, f->fmt.meta.width, f->fmt.meta.height,
>> + &f->fmt.meta.dataformat);
>> + break;
>> + case FE_STATS:
>> + case FE_CONFIG:
>> + cfe_dbg("%s: [%s] %u bytes, V4L2 meta %p4cc\n", __func__,
>> + node_desc[node->id].name, f->fmt.meta.buffersize,
>> + &f->fmt.meta.dataformat);
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + if (!node_supports_meta(node))
>> + return -EINVAL;
>> +
>> + switch (node->id) {
>> + case CSI2_CH0...CSI2_CH3:
>> + fmt = find_format_by_pix(f->fmt.meta.dataformat);
>> + if (!fmt || !(fmt->flags & CFE_FORMAT_FLAG_META_CAP))
>> + fmt = find_format_by_pix(V4L2_META_FMT_GENERIC_CSI2_10);
>> +
>> + f->fmt.meta.dataformat = fmt->fourcc;
>> +
>> + cfe_calc_meta_format_size_bpl(cfe, fmt, f);
>> +
>> + return 0;
>> + case FE_STATS:
>> + f->fmt.meta.dataformat = V4L2_META_FMT_RPI_FE_STATS;
>> + f->fmt.meta.buffersize = sizeof(struct pisp_statistics);
>> + return 0;
>> + case FE_CONFIG:
>> + f->fmt.meta.dataformat = V4L2_META_FMT_RPI_FE_CFG;
>> + f->fmt.meta.buffersize = sizeof(struct pisp_fe_config);
>> + return 0;
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static int cfe_g_fmt_meta(struct file *file, void *priv, struct v4l2_format *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + if (!node_supports_meta(node))
>> + return -EINVAL;
>> +
>> + *f = node->meta_fmt;
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_s_fmt_meta(struct file *file, void *priv, struct v4l2_format *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> + struct vb2_queue *q = &node->buffer_queue;
>> + int ret;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + if (vb2_is_busy(q))
>> + return -EBUSY;
>> +
>> + if (!node_supports_meta(node))
>> + return -EINVAL;
>> +
>> + ret = cfe_validate_fmt_meta(node, f);
>> + if (ret)
>> + return ret;
>> +
>> + node->meta_fmt = *f;
>> +
>> + cfe_dbg("%s: Set %p4cc\n", __func__,
>> + &node->meta_fmt.fmt.meta.dataformat);
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_try_fmt_meta(struct file *file, void *priv,
>> + struct v4l2_format *f)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> +
>> + cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
>> + return cfe_validate_fmt_meta(node, f);
>> +}
>> +
>> +static int cfe_enum_framesizes(struct file *file, void *priv,
>> + struct v4l2_frmsizeenum *fsize)
>> +{
>> + struct cfe_node *node = video_drvdata(file);
>> + struct cfe_device *cfe = node->cfe;
>> + const struct cfe_fmt *fmt;
>> +
>> + cfe_dbg("%s [%s]\n", __func__, node_desc[node->id].name);
>> +
>> + if (fsize->index > 0)
>> + return -EINVAL;
>> +
>> + /* check for valid format */
>> + fmt = find_format_by_pix(fsize->pixel_format);
>> + if (!fmt) {
>> + cfe_dbg("Invalid pixel code: %x\n", fsize->pixel_format);
>> + return -EINVAL;
>> + }
>> +
>> + /* TODO: Do we have limits on the step_width? */
>> +
>> + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
>> + fsize->stepwise.min_width = MIN_WIDTH;
>> + fsize->stepwise.max_width = MAX_WIDTH;
>> + fsize->stepwise.step_width = 2;
>> + fsize->stepwise.min_height = MIN_HEIGHT;
>> + fsize->stepwise.max_height = MAX_HEIGHT;
>> + fsize->stepwise.step_height = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_vb2_ioctl_reqbufs(struct file *file, void *priv,
>> + struct v4l2_requestbuffers *p)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> + struct cfe_node *node = video_get_drvdata(vdev);
>> + struct cfe_device *cfe = node->cfe;
>> + int ret;
>> +
>> + cfe_dbg("%s: [%s] type:%u\n", __func__, node_desc[node->id].name,
>> + p->type);
>> +
>> + if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
>> + p->type != V4L2_BUF_TYPE_META_CAPTURE &&
>> + p->type != V4L2_BUF_TYPE_META_OUTPUT)
>> + return -EINVAL;
>> +
>> + ret = vb2_queue_change_type(vdev->queue, p->type);
>> + if (ret)
>> + return ret;
>> +
>> + return vb2_ioctl_reqbufs(file, priv, p);
>> +}
>> +
>> +static int cfe_vb2_ioctl_create_bufs(struct file *file, void *priv,
>> + struct v4l2_create_buffers *p)
>> +{
>> + struct video_device *vdev = video_devdata(file);
>> + struct cfe_node *node = video_get_drvdata(vdev);
>> + struct cfe_device *cfe = node->cfe;
>> + int ret;
>> +
>> + cfe_dbg("%s: [%s] type:%u\n", __func__, node_desc[node->id].name,
>> + p->format.type);
>> +
>> + if (p->format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
>> + p->format.type != V4L2_BUF_TYPE_META_CAPTURE &&
>> + p->format.type != V4L2_BUF_TYPE_META_OUTPUT)
>> + return -EINVAL;
>> +
>> + ret = vb2_queue_change_type(vdev->queue, p->format.type);
>> + if (ret)
>> + return ret;
>> +
>> + return vb2_ioctl_create_bufs(file, priv, p);
>> +}
>> +
>> +static int cfe_subscribe_event(struct v4l2_fh *fh,
>> + const struct v4l2_event_subscription *sub)
>> +{
>> + struct cfe_node *node = video_get_drvdata(fh->vdev);
>> +
>> + switch (sub->type) {
>> + case V4L2_EVENT_FRAME_SYNC:
>> + if (!node_supports_image_output(node))
>> + break;
>> +
>> + return v4l2_event_subscribe(fh, sub, 2, NULL);
>> + case V4L2_EVENT_SOURCE_CHANGE:
>> + if (!node_supports_image_output(node) &&
>> + !node_supports_meta_output(node))
>> + break;
>> +
>> + return v4l2_event_subscribe(fh, sub, 4, NULL);
>> + }
>> +
>> + return v4l2_ctrl_subscribe_event(fh, sub);
>> +}
>> +
>> +static const struct v4l2_ioctl_ops cfe_ioctl_ops = {
>> + .vidioc_querycap = cfe_querycap,
>> + .vidioc_enum_fmt_vid_cap = cfe_enum_fmt_vid_cap,
>> + .vidioc_g_fmt_vid_cap = cfe_g_fmt,
>> + .vidioc_s_fmt_vid_cap = cfe_s_fmt_vid_cap,
>> + .vidioc_try_fmt_vid_cap = cfe_try_fmt_vid_cap,
>> +
>> + .vidioc_enum_fmt_meta_cap = cfe_enum_fmt_meta,
>> + .vidioc_g_fmt_meta_cap = cfe_g_fmt_meta,
>> + .vidioc_s_fmt_meta_cap = cfe_s_fmt_meta,
>> + .vidioc_try_fmt_meta_cap = cfe_try_fmt_meta,
>> +
>> + .vidioc_enum_fmt_meta_out = cfe_enum_fmt_meta,
>> + .vidioc_g_fmt_meta_out = cfe_g_fmt_meta,
>> + .vidioc_s_fmt_meta_out = cfe_s_fmt_meta,
>> + .vidioc_try_fmt_meta_out = cfe_try_fmt_meta,
>> +
>> + .vidioc_enum_framesizes = cfe_enum_framesizes,
>> +
>> + .vidioc_reqbufs = cfe_vb2_ioctl_reqbufs,
>> + .vidioc_create_bufs = cfe_vb2_ioctl_create_bufs,
>> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
>> + .vidioc_querybuf = vb2_ioctl_querybuf,
>> + .vidioc_qbuf = vb2_ioctl_qbuf,
>> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
>> + .vidioc_expbuf = vb2_ioctl_expbuf,
>> + .vidioc_streamon = vb2_ioctl_streamon,
>> + .vidioc_streamoff = vb2_ioctl_streamoff,
>> +
>> + .vidioc_subscribe_event = cfe_subscribe_event,
>> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
>> +};
>> +
>> +static void cfe_notify(struct v4l2_subdev *sd, unsigned int notification,
>> + void *arg)
>> +{
>> + struct cfe_device *cfe = to_cfe_device(sd->v4l2_dev);
>> +
>> + switch (notification) {
>> + case V4L2_DEVICE_NOTIFY_EVENT:
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> +
>> + if (check_state(cfe, NODE_REGISTERED, i))
>> + continue;
>> +
>> + v4l2_event_queue(&node->video_dev, arg);
>> + }
>> + break;
>> + default:
>> + break;
>> + }
>> +}
>> +
>> +/* cfe capture driver file operations */
>> +static const struct v4l2_file_operations cfe_fops = {
>> + .owner = THIS_MODULE,
>> + .open = v4l2_fh_open,
>> + .release = vb2_fop_release,
>> + .poll = vb2_fop_poll,
>> + .unlocked_ioctl = video_ioctl2,
>> + .mmap = vb2_fop_mmap,
>> +};
>> +
>> +static int cfe_video_link_validate(struct media_link *link)
>> +{
>> + struct video_device *vd = container_of(link->sink->entity,
>> + struct video_device, entity);
>> + struct cfe_node *node = container_of(vd, struct cfe_node, video_dev);
>> + struct cfe_device *cfe = node->cfe;
>> + struct v4l2_mbus_framefmt *source_fmt;
>> + struct v4l2_subdev_state *state;
>> + struct v4l2_subdev *source_sd;
>> + int ret = 0;
>> +
>> + cfe_dbg("%s: [%s] link \"%s\":%u -> \"%s\":%u\n", __func__,
>> + node_desc[node->id].name,
>> + link->source->entity->name, link->source->index,
>> + link->sink->entity->name, link->sink->index);
>> +
>> + if (!media_entity_remote_source_pad_unique(link->sink->entity)) {
>> + cfe_err("video node %s pad not connected\n", vd->name);
>> + return -ENOTCONN;
>> + }
>> +
>> + source_sd = media_entity_to_v4l2_subdev(link->source->entity);
>> +
>> + state = v4l2_subdev_lock_and_get_active_state(source_sd);
>> +
>> + source_fmt = v4l2_subdev_state_get_format(state, link->source->index);
>> + if (!source_fmt) {
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + if (is_image_output_node(node)) {
>> + struct v4l2_pix_format *pix_fmt = &node->vid_fmt.fmt.pix;
>> + const struct cfe_fmt *fmt;
>> +
>> + if (source_fmt->width != pix_fmt->width ||
>> + source_fmt->height != pix_fmt->height) {
>> + cfe_err("Wrong width or height %ux%u (remote pad set to %ux%u)\n",
>> + pix_fmt->width, pix_fmt->height,
>> + source_fmt->width, source_fmt->height);
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + fmt = find_format_by_code_and_fourcc(source_fmt->code,
>> + pix_fmt->pixelformat);
>> + if (!fmt) {
>> + cfe_err("Format mismatch!\n");
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> + } else if (is_csi2_node(node) && is_meta_output_node(node)) {
>> + struct v4l2_meta_format *meta_fmt = &node->meta_fmt.fmt.meta;
>> + const struct cfe_fmt *fmt;
>> +
>> + if (source_fmt->width != meta_fmt->width ||
>> + source_fmt->height != meta_fmt->height) {
>> + cfe_err("Wrong width or height %ux%u (remote pad set to %ux%u)\n",
>> + meta_fmt->width, meta_fmt->height,
>> + source_fmt->width, source_fmt->height);
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + fmt = find_format_by_code_and_fourcc(source_fmt->code,
>> + meta_fmt->dataformat);
>> + if (!fmt) {
>> + cfe_err("Format mismatch!\n");
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> + }
>> +
>> +out:
>> + v4l2_subdev_unlock_state(state);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct media_entity_operations cfe_media_entity_ops = {
>> + .link_validate = cfe_video_link_validate,
>> +};
>> +
>> +static int cfe_video_link_notify(struct media_link *link, u32 flags,
>> + unsigned int notification)
>> +{
>> + struct media_device *mdev = link->graph_obj.mdev;
>> + struct cfe_device *cfe = container_of(mdev, struct cfe_device, mdev);
>> + struct media_entity *fe = &cfe->fe.sd.entity;
>> + struct media_entity *csi2 = &cfe->csi2.sd.entity;
>> + unsigned long lock_flags;
>> +
>> + if (notification != MEDIA_DEV_NOTIFY_POST_LINK_CH)
>> + return 0;
>> +
>> + cfe_dbg("%s: %s[%u] -> %s[%u] 0x%x", __func__,
>> + link->source->entity->name, link->source->index,
>> + link->sink->entity->name, link->sink->index, flags);
>> +
>> + spin_lock_irqsave(&cfe->state_lock, lock_flags);
>> +
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + if (link->sink->entity != &cfe->node[i].video_dev.entity &&
>> + link->source->entity != &cfe->node[i].video_dev.entity)
>> + continue;
>> +
>> + if (link->flags & MEDIA_LNK_FL_ENABLED)
>> + set_state(cfe, NODE_ENABLED, i);
>> + else
>> + clear_state(cfe, NODE_ENABLED, i);
>> +
>> + break;
>> + }
>> +
>> + spin_unlock_irqrestore(&cfe->state_lock, lock_flags);
>> +
>> + if (link->source->entity != csi2)
>> + return 0;
>> + if (link->sink->entity != fe)
>> + return 0;
>> + if (link->sink->index != 0)
>> + return 0;
>> +
>> + cfe->fe_csi2_channel = -1;
>> + if (link->flags & MEDIA_LNK_FL_ENABLED) {
>> + if (link->source->index == node_desc[CSI2_CH0].link_pad)
>> + cfe->fe_csi2_channel = CSI2_CH0;
>> + else if (link->source->index == node_desc[CSI2_CH1].link_pad)
>> + cfe->fe_csi2_channel = CSI2_CH1;
>> + else if (link->source->index == node_desc[CSI2_CH2].link_pad)
>> + cfe->fe_csi2_channel = CSI2_CH2;
>> + else if (link->source->index == node_desc[CSI2_CH3].link_pad)
>> + cfe->fe_csi2_channel = CSI2_CH3;
>> + }
>> +
>> + if (is_fe_enabled(cfe))
>> + cfe_dbg("%s: Found CSI2:%d -> FE:0 link\n", __func__,
>> + cfe->fe_csi2_channel);
>> + else
>> + cfe_dbg("%s: Unable to find CSI2:x -> FE:0 link\n", __func__);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct media_device_ops cfe_media_device_ops = {
>> + .link_notify = cfe_video_link_notify,
>> +};
>> +
>> +static void cfe_release(struct kref *kref)
>> +{
>> + struct cfe_device *cfe = container_of(kref, struct cfe_device, kref);
>> +
>> + media_device_cleanup(&cfe->mdev);
>> +
>> + kfree(cfe);
>> +}
>> +
>> +static void cfe_put(struct cfe_device *cfe)
>> +{
>> + kref_put(&cfe->kref, cfe_release);
>> +}
>> +
>> +static void cfe_get(struct cfe_device *cfe)
>> +{
>> + kref_get(&cfe->kref);
>> +}
>> +
>> +static void cfe_node_release(struct video_device *vdev)
>> +{
>> + struct cfe_node *node = video_get_drvdata(vdev);
>> +
>> + cfe_put(node->cfe);
>> +}
>> +
>> +static int cfe_register_node(struct cfe_device *cfe, int id)
>> +{
>> + struct video_device *vdev;
>> + const struct cfe_fmt *fmt;
>> + struct vb2_queue *q;
>> + struct cfe_node *node = &cfe->node[id];
>> + int ret;
>> +
>> + node->cfe = cfe;
>> + node->id = id;
>> +
>> + if (node_supports_image(node)) {
>> + if (node_supports_image_output(node))
>> + node->vid_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> + else
>> + node->vid_fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
>> +
>> + fmt = find_format_by_code(cfe_default_format.code);
>> + if (!fmt) {
>> + cfe_err("Failed to find format code\n");
>> + return -EINVAL;
>> + }
>> +
>> + node->vid_fmt.fmt.pix.pixelformat = fmt->fourcc;
>> + v4l2_fill_pix_format(&node->vid_fmt.fmt.pix, &cfe_default_format);
>> +
>> + ret = cfe_validate_fmt_vid_cap(node, &node->vid_fmt);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + if (node_supports_meta(node)) {
>> + if (node_supports_meta_output(node))
>> + node->meta_fmt.type = V4L2_BUF_TYPE_META_CAPTURE;
>> + else
>> + node->meta_fmt.type = V4L2_BUF_TYPE_META_OUTPUT;
>> +
>> + ret = cfe_validate_fmt_meta(node, &node->meta_fmt);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + mutex_init(&node->lock);
>> +
>> + q = &node->buffer_queue;
>> + q->type = node_supports_image(node) ? node->vid_fmt.type :
>> + node->meta_fmt.type;
>> + q->io_modes = VB2_MMAP | VB2_DMABUF;
>> + q->drv_priv = node;
>> + q->ops = &cfe_video_qops;
>> + q->mem_ops = &vb2_dma_contig_memops;
>> + q->buf_struct_size = id == FE_CONFIG ? sizeof(struct cfe_config_buffer)
>> + : sizeof(struct cfe_buffer);
>> + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
>> + q->lock = &node->lock;
>> + q->min_queued_buffers = 1;
>> + q->dev = &cfe->pdev->dev;
>> +
>> + ret = vb2_queue_init(q);
>> + if (ret) {
>> + cfe_err("vb2_queue_init() failed\n");
>> + return ret;
>> + }
>> +
>> + INIT_LIST_HEAD(&node->dma_queue);
>> +
>> + vdev = &node->video_dev;
>> + vdev->release = cfe_node_release;
>> + vdev->fops = &cfe_fops;
>> + vdev->ioctl_ops = &cfe_ioctl_ops;
>> + vdev->entity.ops = &cfe_media_entity_ops;
>> + vdev->v4l2_dev = &cfe->v4l2_dev;
>> + vdev->vfl_dir = (node_supports_image_output(node) ||
>> + node_supports_meta_output(node)) ?
>> + VFL_DIR_RX :
>> + VFL_DIR_TX;
>> + vdev->queue = q;
>> + vdev->lock = &node->lock;
>> + vdev->device_caps = node_desc[id].caps;
>> + vdev->device_caps |= V4L2_CAP_STREAMING | V4L2_CAP_IO_MC;
>> +
>> + /* Define the device names */
>> + snprintf(vdev->name, sizeof(vdev->name), "%s-%s", CFE_MODULE_NAME,
>> + node_desc[id].name);
>> +
>> + video_set_drvdata(vdev, node);
>> + node->pad.flags = node_desc[id].pad_flags;
>> + media_entity_pads_init(&vdev->entity, 1, &node->pad);
>> +
>> + if (!node_supports_image(node)) {
>> + v4l2_disable_ioctl(&node->video_dev,
>> + VIDIOC_ENUM_FRAMEINTERVALS);
>> + v4l2_disable_ioctl(&node->video_dev, VIDIOC_ENUM_FRAMESIZES);
>> + }
>> +
>> + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
>> + if (ret) {
>> + cfe_err("Unable to register video device %s\n", vdev->name);
>> + return ret;
>> + }
>> +
>> + cfe_info("Registered [%s] node id %d as /dev/video%u\n",
>> + vdev->name, id, vdev->num);
>> +
>> + /*
>> + * Acquire a reference to cfe, which will be released when the video
>> + * device will be unregistered and userspace will have closed all open
>> + * file handles.
>> + */
>> + cfe_get(cfe);
>> + set_state(cfe, NODE_REGISTERED, id);
>> +
>> + return 0;
>> +}
>> +
>> +static void cfe_unregister_nodes(struct cfe_device *cfe)
>> +{
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> +
>> + if (check_state(cfe, NODE_REGISTERED, i)) {
>> + clear_state(cfe, NODE_REGISTERED, i);
>> + video_unregister_device(&node->video_dev);
>> + }
>> + }
>> +}
>> +
>> +static int cfe_link_node_pads(struct cfe_device *cfe)
>> +{
>> + int ret;
>> + int pad;
>> +
>> + /* Source -> CSI2 */
>> +
>> + pad = media_entity_get_fwnode_pad(&cfe->source_sd->entity,
>> + cfe->remote_ep_fwnode,
>> + MEDIA_PAD_FL_SOURCE);
>> + if (pad < 0) {
>> + cfe_err("Source %s has no connected source pad\n",
>> + cfe->source_sd->name);
>> + return pad;
>> + }
>> +
>> + cfe->source_pad = pad;
>> +
>> + ret = media_create_pad_link(&cfe->source_sd->entity, pad,
>> + &cfe->csi2.sd.entity, CSI2_PAD_SINK,
>> + MEDIA_LNK_FL_IMMUTABLE |
>> + MEDIA_LNK_FL_ENABLED);
>> + if (ret)
>> + return ret;
>> +
>> + for (unsigned int i = 0; i < CSI2_NUM_CHANNELS; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> +
>> + if (!check_state(cfe, NODE_REGISTERED, i))
>> + continue;
>> +
>> + /* CSI2 channel # -> /dev/video# */
>> + ret = media_create_pad_link(&cfe->csi2.sd.entity,
>> + node_desc[i].link_pad,
>> + &node->video_dev.entity, 0, 0);
>> + if (ret)
>> + return ret;
>> +
>> + if (node_supports_image(node)) {
>> + /* CSI2 channel # -> FE Input */
>> + ret = media_create_pad_link(&cfe->csi2.sd.entity,
>> + node_desc[i].link_pad,
>> + &cfe->fe.sd.entity,
>> + FE_STREAM_PAD, 0);
>> + if (ret)
>> + return ret;
>> + }
>> + }
>> +
>> + for (unsigned int i = CSI2_NUM_CHANNELS; i < NUM_NODES; i++) {
>> + struct cfe_node *node = &cfe->node[i];
>> + struct media_entity *src, *dst;
>> + unsigned int src_pad, dst_pad;
>> +
>> + if (node_desc[i].pad_flags & MEDIA_PAD_FL_SINK) {
>> + /* FE -> /dev/video# */
>> + src = &cfe->fe.sd.entity;
>> + src_pad = node_desc[i].link_pad;
>> + dst = &node->video_dev.entity;
>> + dst_pad = 0;
>> + } else {
>> + /* /dev/video# -> FE */
>> + dst = &cfe->fe.sd.entity;
>> + dst_pad = node_desc[i].link_pad;
>> + src = &node->video_dev.entity;
>> + src_pad = 0;
>> + }
>> +
>> + ret = media_create_pad_link(src, src_pad, dst, dst_pad, 0);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_probe_complete(struct cfe_device *cfe)
>> +{
>> + int ret;
>> +
>> + cfe->v4l2_dev.notify = cfe_notify;
>> +
>> + for (unsigned int i = 0; i < NUM_NODES; i++) {
>> + ret = cfe_register_node(cfe, i);
>> + if (ret) {
>> + cfe_err("Unable to register video node %u.\n", i);
>> + goto unregister;
>> + }
>> + }
>> +
>> + ret = cfe_link_node_pads(cfe);
>> + if (ret) {
>> + cfe_err("Unable to link node pads.\n");
>> + goto unregister;
>> + }
>> +
>> + ret = v4l2_device_register_subdev_nodes(&cfe->v4l2_dev);
>> + if (ret) {
>> + cfe_err("Unable to register subdev nodes.\n");
>> + goto unregister;
>> + }
>> +
>> + return 0;
>> +
>> +unregister:
>> + cfe_unregister_nodes(cfe);
>> + return ret;
>> +}
>> +
>> +static int cfe_async_bound(struct v4l2_async_notifier *notifier,
>> + struct v4l2_subdev *subdev,
>> + struct v4l2_async_connection *asd)
>> +{
>> + struct cfe_device *cfe = to_cfe_device(notifier->v4l2_dev);
>> +
>> + if (cfe->source_sd) {
>> + cfe_err("Rejecting subdev %s (Already set!!)", subdev->name);
>> + return 0;
>> + }
>> +
>> + cfe->source_sd = subdev;
>> +
>> + cfe_dbg("Using source %s for capture\n", subdev->name);
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_async_complete(struct v4l2_async_notifier *notifier)
>> +{
>> + struct cfe_device *cfe = to_cfe_device(notifier->v4l2_dev);
>> +
>> + return cfe_probe_complete(cfe);
>> +}
>> +
>> +static const struct v4l2_async_notifier_operations cfe_async_ops = {
>> + .bound = cfe_async_bound,
>> + .complete = cfe_async_complete,
>> +};
>> +
>> +static int cfe_register_async_nf(struct cfe_device *cfe)
>> +{
>> + struct platform_device *pdev = cfe->pdev;
>> + struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY };
>> + int ret = -EINVAL;
>> + struct fwnode_handle *local_ep_fwnode;
>> + struct fwnode_handle *remote_ep_fwnode;
>> + struct v4l2_async_connection *asd;
>> +
>> + local_ep_fwnode = fwnode_graph_get_endpoint_by_id(pdev->dev.fwnode, 0, 0, 0);
>> + if (!local_ep_fwnode) {
>> + cfe_err("Failed to find local endpoint fwnode\n");
>> + return -ENODEV;
>> + }
>> +
>> + remote_ep_fwnode = fwnode_graph_get_remote_endpoint(local_ep_fwnode);
>> + if (!remote_ep_fwnode) {
>> + cfe_err("Failed to find remote endpoint fwnode\n");
>> + ret = -ENODEV;
>> + goto err_put_local_fwnode;
>> + }
>> +
>> + /* Parse the local endpoint and validate its configuration. */
>> + v4l2_fwnode_endpoint_parse(local_ep_fwnode, &ep);
>> +
>> + if (ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
>> + cfe_err("endpoint node type != CSI2\n");
>> + ret = -EINVAL;
>> + goto err_put_remote_fwnode;
>> + }
>> +
>> + for (unsigned int lane = 0; lane < ep.bus.mipi_csi2.num_data_lanes; lane++) {
>> + if (ep.bus.mipi_csi2.data_lanes[lane] != lane + 1) {
>> + cfe_err("subdevice %pfwf: data lanes reordering not supported\n",
>> + remote_ep_fwnode);
>> + ret = -EINVAL;
>> + goto err_put_remote_fwnode;
>> + }
>> + }
>> +
>> + cfe->csi2.dphy.max_lanes = ep.bus.mipi_csi2.num_data_lanes;
>> + cfe->csi2.bus_flags = ep.bus.mipi_csi2.flags;
>> +
>> + cfe->remote_ep_fwnode = remote_ep_fwnode;
>> +
>> + cfe_dbg("source %pfwf: %u data lanes, flags=0x%08x\n",
>> + remote_ep_fwnode, cfe->csi2.dphy.max_lanes, cfe->csi2.bus_flags);
>> +
>> + /* Initialize and register the async notifier. */
>> + v4l2_async_nf_init(&cfe->notifier, &cfe->v4l2_dev);
>> + cfe->notifier.ops = &cfe_async_ops;
>> +
>> + asd = v4l2_async_nf_add_fwnode(&cfe->notifier, remote_ep_fwnode,
>> + struct v4l2_async_connection);
>
> Could you use v4l2_async_nf_add_fwnode_remote() and just not bother with
> remote_ep_fwnode at all?
I need the remote_ep_fwnode in cfe_link_node_pads() when creating the links.
Is there some other way to get the remote pad so that I can call the
media_create_pad_link()?
>> + if (IS_ERR(asd)) {
>> + ret = PTR_ERR(asd);
>> + cfe_err("Error adding subdevice: %d\n", ret);
>> + goto err_put_remote_fwnode;
>> + }
>> +
>> + ret = v4l2_async_nf_register(&cfe->notifier);
>> + if (ret) {
>> + cfe_err("Error registering async notifier: %d\n", ret);
>> + goto err_nf_cleanup;
>> + }
>> +
>> + fwnode_handle_put(local_ep_fwnode);
>> +
>> + return 0;
>> +
>> +err_nf_cleanup:
>> + v4l2_async_nf_cleanup(&cfe->notifier);
>> +err_put_remote_fwnode:
>> + fwnode_handle_put(remote_ep_fwnode);
>> +err_put_local_fwnode:
>> + fwnode_handle_put(local_ep_fwnode);
>> +
>> + return ret;
>> +}
>> +
>> +static int cfe_probe(struct platform_device *pdev)
>> +{
>> + struct cfe_device *cfe;
>> + char debugfs_name[32];
>> + int ret;
>> +
>> + cfe = kzalloc(sizeof(*cfe), GFP_KERNEL);
>> + if (!cfe)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, cfe);
>> +
>> + kref_init(&cfe->kref);
>> + cfe->pdev = pdev;
>> + cfe->fe_csi2_channel = -1;
>> + spin_lock_init(&cfe->state_lock);
>> +
>> + cfe->csi2.base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(cfe->csi2.base)) {
>> + dev_err(&pdev->dev, "Failed to get dma io block\n");
>> + ret = PTR_ERR(cfe->csi2.base);
>> + goto err_cfe_put;
>> + }
>> +
>> + cfe->csi2.dphy.base = devm_platform_ioremap_resource(pdev, 1);
>> + if (IS_ERR(cfe->csi2.dphy.base)) {
>> + dev_err(&pdev->dev, "Failed to get host io block\n");
>> + ret = PTR_ERR(cfe->csi2.dphy.base);
>> + goto err_cfe_put;
>> + }
>> +
>> + cfe->mipi_cfg_base = devm_platform_ioremap_resource(pdev, 2);
>> + if (IS_ERR(cfe->mipi_cfg_base)) {
>> + dev_err(&pdev->dev, "Failed to get mipi cfg io block\n");
>> + ret = PTR_ERR(cfe->mipi_cfg_base);
>> + goto err_cfe_put;
>> + }
>> +
>> + cfe->fe.base = devm_platform_ioremap_resource(pdev, 3);
>> + if (IS_ERR(cfe->fe.base)) {
>> + dev_err(&pdev->dev, "Failed to get pisp fe io block\n");
>> + ret = PTR_ERR(cfe->fe.base);
>> + goto err_cfe_put;
>> + }
>> +
>> + ret = platform_get_irq(pdev, 0);
>> + if (ret <= 0) {
>> + dev_err(&pdev->dev, "No IRQ resource\n");
>> + ret = -EINVAL;
>> + goto err_cfe_put;
>> + }
>> +
>> + ret = devm_request_irq(&pdev->dev, ret, cfe_isr, 0, "rp1-cfe", cfe);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Unable to request interrupt\n");
>> + ret = -EINVAL;
>> + goto err_cfe_put;
>> + }
>> +
>> + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>> + if (ret) {
>> + dev_err(&pdev->dev, "DMA enable failed\n");
>> + goto err_cfe_put;
>> + }
>> +
>> + /* TODO: Enable clock only when running. */
>> + cfe->clk = devm_clk_get(&pdev->dev, NULL);
>> + if (IS_ERR(cfe->clk))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(cfe->clk),
>> + "clock not found\n");
>> +
>> + cfe->mdev.dev = &pdev->dev;
>> + cfe->mdev.ops = &cfe_media_device_ops;
>> + strscpy(cfe->mdev.model, CFE_MODULE_NAME, sizeof(cfe->mdev.model));
>> + strscpy(cfe->mdev.serial, "", sizeof(cfe->mdev.serial));
>> + snprintf(cfe->mdev.bus_info, sizeof(cfe->mdev.bus_info), "platform:%s",
>> + dev_name(&pdev->dev));
>> +
>> + media_device_init(&cfe->mdev);
>> +
>> + cfe->v4l2_dev.mdev = &cfe->mdev;
>> +
>> + ret = v4l2_device_register(&pdev->dev, &cfe->v4l2_dev);
>> + if (ret) {
>> + cfe_err("Unable to register v4l2 device.\n");
>> + goto err_cfe_put;
>> + }
>> +
>> + snprintf(debugfs_name, sizeof(debugfs_name), "rp1-cfe:%s",
>> + dev_name(&pdev->dev));
>> + cfe->debugfs = debugfs_create_dir(debugfs_name, NULL);
>> + debugfs_create_file("regs", 0444, cfe->debugfs, cfe,
>> + &mipi_cfg_regs_fops);
>> +
>> + /* Enable the block power domain */
>> + pm_runtime_enable(&pdev->dev);
>> +
>> + ret = pm_runtime_resume_and_get(&cfe->pdev->dev);
>> + if (ret)
>> + goto err_runtime_disable;
>> +
>> + cfe->csi2.v4l2_dev = &cfe->v4l2_dev;
>> + ret = csi2_init(&cfe->csi2, cfe->debugfs);
>> + if (ret) {
>> + cfe_err("Failed to init csi2 (%d)\n", ret);
>> + goto err_runtime_put;
>> + }
>> +
>> + cfe->fe.v4l2_dev = &cfe->v4l2_dev;
>> + ret = pisp_fe_init(&cfe->fe, cfe->debugfs);
>> + if (ret) {
>> + cfe_err("Failed to init pisp fe (%d)\n", ret);
>> + goto err_csi2_uninit;
>> + }
>> +
>> + cfe->mdev.hw_revision = cfe->fe.hw_revision;
>> + ret = media_device_register(&cfe->mdev);
>> + if (ret < 0) {
>> + cfe_err("Unable to register media-controller device.\n");
>> + goto err_pisp_fe_uninit;
>> + }
>> +
>> + ret = cfe_register_async_nf(cfe);
>> + if (ret) {
>> + cfe_err("Failed to connect subdevs\n");
>> + goto err_media_unregister;
>> + }
>> +
>> + pm_runtime_put(&cfe->pdev->dev);
>> +
>> + return 0;
>> +
>> +err_media_unregister:
>> + media_device_unregister(&cfe->mdev);
>> +err_pisp_fe_uninit:
>> + pisp_fe_uninit(&cfe->fe);
>> +err_csi2_uninit:
>> + csi2_uninit(&cfe->csi2);
>> +err_runtime_put:
>> + pm_runtime_put(&cfe->pdev->dev);
>> +err_runtime_disable:
>> + pm_runtime_disable(&pdev->dev);
>> + debugfs_remove(cfe->debugfs);
>> + v4l2_device_unregister(&cfe->v4l2_dev);
>> +err_cfe_put:
>> + cfe_put(cfe);
>> +
>> + return ret;
>> +}
>> +
>> +static void cfe_remove(struct platform_device *pdev)
>> +{
>> + struct cfe_device *cfe = platform_get_drvdata(pdev);
>> +
>> + debugfs_remove(cfe->debugfs);
>> +
>> + v4l2_async_nf_unregister(&cfe->notifier);
>> + v4l2_async_nf_cleanup(&cfe->notifier);
>> +
>> + media_device_unregister(&cfe->mdev);
>
> Do you think you might have the time to write patch that would convert the
> driver to use media device refcounting? It's not needed for upstreaming
> though, but would be nice to have such a new driver to be converted when we
> (hopefully not in too distant future) could merge that set.
I had a quick try. I noticed that the current driver will crash if
streaming is active when unbinding/unloading, so that needs fixing anyway.
But with the v4 series ([PATCH v4 00/26] Media device lifetime
management), I hit WARN_ON(!vdev->release) in __video_register_device().
I haven't studied the series that much, but I understood vdev's release
will be handled via the media device. Is that not right?
>> + cfe_unregister_nodes(cfe);
>> +
>> + pisp_fe_uninit(&cfe->fe);
>> + csi2_uninit(&cfe->csi2);
>> +
>> + fwnode_handle_put(cfe->remote_ep_fwnode);
>> +
>> + pm_runtime_disable(&pdev->dev);
>> +
>> + v4l2_device_unregister(&cfe->v4l2_dev);
>> +
>> + cfe_put(cfe);
>> +}
>> +
>> +static int cfe_runtime_suspend(struct device *dev)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct cfe_device *cfe = platform_get_drvdata(pdev);
>> +
>> + clk_disable_unprepare(cfe->clk);
>> +
>> + return 0;
>> +}
>> +
>> +static int cfe_runtime_resume(struct device *dev)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct cfe_device *cfe = platform_get_drvdata(pdev);
>> + int ret;
>> +
>> + ret = clk_prepare_enable(cfe->clk);
>> + if (ret) {
>> + dev_err(dev, "Unable to enable clock\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dev_pm_ops cfe_pm_ops = {
>> + SET_RUNTIME_PM_OPS(cfe_runtime_suspend, cfe_runtime_resume, NULL)
>> + SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
>> +};
>> +
>> +static const struct of_device_id cfe_of_match[] = {
>> + { .compatible = "raspberrypi,rp1-cfe" },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, cfe_of_match);
>> +
>> +static struct platform_driver cfe_driver = {
>> + .probe = cfe_probe,
>> + .remove = cfe_remove,
>> + .driver = {
>> + .name = CFE_MODULE_NAME,
>> + .of_match_table = cfe_of_match,
>> + .pm = &cfe_pm_ops,
>> + },
>> +};
>> +
>> +module_platform_driver(cfe_driver);
>> +
>> +MODULE_AUTHOR("Naushir Patuck <naush@...pberrypi.com>");
>> +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@...asonboard.com>");
>> +MODULE_DESCRIPTION("Raspberry Pi RP1 Camera Front End driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_VERSION(CFE_VERSION);
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/cfe.h b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.h
>> new file mode 100644
>> index 000000000000..c63cc314be3c
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/cfe.h
>> @@ -0,0 +1,43 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * RP1 CFE Driver
>> + *
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + * Copyright (c) 2023-2024 Ideas on Board Oy
>> + */
>> +#ifndef _RP1_CFE_
>> +#define _RP1_CFE_
>> +
>> +#include <linux/media-bus-format.h>
>> +#include <linux/types.h>
>> +#include <linux/videodev2.h>
>> +
>> +extern bool cfe_debug_verbose;
>> +
>> +enum cfe_remap_types {
>> + CFE_REMAP_16BIT,
>> + CFE_REMAP_COMPRESSED,
>> + CFE_NUM_REMAP,
>> +};
>> +
>> +#define CFE_FORMAT_FLAG_META_OUT BIT(0)
>> +#define CFE_FORMAT_FLAG_META_CAP BIT(1)
>> +#define CFE_FORMAT_FLAG_FE_OUT BIT(2)
>> +
>> +struct cfe_fmt {
>> + u32 fourcc;
>> + u32 code;
>> + u8 depth;
>> + u8 csi_dt;
>> + u32 remap[CFE_NUM_REMAP];
>> + u32 flags;
>> +};
>> +
>> +extern const struct v4l2_mbus_framefmt cfe_default_format;
>> +
>> +const struct cfe_fmt *find_format_by_code(u32 code);
>> +const struct cfe_fmt *find_format_by_pix(u32 pixelformat);
>> +u32 cfe_find_16bit_code(u32 code);
>> +u32 cfe_find_compressed_code(u32 code);
>> +
>> +#endif
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/csi2.c b/drivers/media/platform/raspberrypi/rp1-cfe/csi2.c
>> new file mode 100644
>> index 000000000000..6d66402e732a
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/csi2.c
>> @@ -0,0 +1,583 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * RP1 CSI-2 Driver
>> + *
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + * Copyright (c) 2023-2024 Ideas on Board Oy
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/moduleparam.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/seq_file.h>
>> +
>> +#include <media/videobuf2-dma-contig.h>
>> +
>> +#include "cfe.h"
>> +#include "csi2.h"
>> +
>> +#include "cfe-trace.h"
>> +
>> +static bool csi2_track_errors;
>> +module_param_named(track_csi2_errors, csi2_track_errors, bool, 0);
>> +MODULE_PARM_DESC(track_csi2_errors, "track csi-2 errors");
>> +
>> +#define csi2_dbg(fmt, arg...) dev_dbg(csi2->v4l2_dev->dev, fmt, ##arg)
>> +#define csi2_err(fmt, arg...) dev_err(csi2->v4l2_dev->dev, fmt, ##arg)
>> +
>> +/* CSI2-DMA registers */
>> +#define CSI2_STATUS 0x000
>> +#define CSI2_QOS 0x004
>> +#define CSI2_DISCARDS_OVERFLOW 0x008
>> +#define CSI2_DISCARDS_INACTIVE 0x00c
>> +#define CSI2_DISCARDS_UNMATCHED 0x010
>> +#define CSI2_DISCARDS_LEN_LIMIT 0x014
>> +
>> +#define CSI2_DISCARDS_AMOUNT_SHIFT 0
>> +#define CSI2_DISCARDS_AMOUNT_MASK GENMASK(23, 0)
>> +#define CSI2_DISCARDS_DT_SHIFT 24
>> +#define CSI2_DISCARDS_DT_MASK GENMASK(29, 24)
>> +#define CSI2_DISCARDS_VC_SHIFT 30
>> +#define CSI2_DISCARDS_VC_MASK GENMASK(31, 30)
>> +
>> +#define CSI2_LLEV_PANICS 0x018
>> +#define CSI2_ULEV_PANICS 0x01c
>> +#define CSI2_IRQ_MASK 0x020
>> +#define CSI2_IRQ_MASK_IRQ_OVERFLOW BIT(0)
>> +#define CSI2_IRQ_MASK_IRQ_DISCARD_OVERFLOW BIT(1)
>> +#define CSI2_IRQ_MASK_IRQ_DISCARD_LENGTH_LIMIT BIT(2)
>> +#define CSI2_IRQ_MASK_IRQ_DISCARD_UNMATCHED BIT(3)
>> +#define CSI2_IRQ_MASK_IRQ_DISCARD_INACTIVE BIT(4)
>> +#define CSI2_IRQ_MASK_IRQ_ALL \
>> + (CSI2_IRQ_MASK_IRQ_OVERFLOW | CSI2_IRQ_MASK_IRQ_DISCARD_OVERFLOW | \
>> + CSI2_IRQ_MASK_IRQ_DISCARD_LENGTH_LIMIT | \
>> + CSI2_IRQ_MASK_IRQ_DISCARD_UNMATCHED | \
>> + CSI2_IRQ_MASK_IRQ_DISCARD_INACTIVE)
>> +
>> +#define CSI2_CTRL 0x024
>> +#define CSI2_CH_CTRL(x) ((x) * 0x40 + 0x28)
>> +#define CSI2_CH_ADDR0(x) ((x) * 0x40 + 0x2c)
>> +#define CSI2_CH_ADDR1(x) ((x) * 0x40 + 0x3c)
>> +#define CSI2_CH_STRIDE(x) ((x) * 0x40 + 0x30)
>> +#define CSI2_CH_LENGTH(x) ((x) * 0x40 + 0x34)
>> +#define CSI2_CH_DEBUG(x) ((x) * 0x40 + 0x38)
>> +#define CSI2_CH_FRAME_SIZE(x) ((x) * 0x40 + 0x40)
>> +#define CSI2_CH_COMP_CTRL(x) ((x) * 0x40 + 0x44)
>> +#define CSI2_CH_FE_FRAME_ID(x) ((x) * 0x40 + 0x48)
>> +
>> +/* CSI2_STATUS */
>> +#define CSI2_STATUS_IRQ_FS(x) (BIT(0) << (x))
>> +#define CSI2_STATUS_IRQ_FE(x) (BIT(4) << (x))
>> +#define CSI2_STATUS_IRQ_FE_ACK(x) (BIT(8) << (x))
>> +#define CSI2_STATUS_IRQ_LE(x) (BIT(12) << (x))
>> +#define CSI2_STATUS_IRQ_LE_ACK(x) (BIT(16) << (x))
>> +#define CSI2_STATUS_IRQ_CH_MASK(x) \
>> + (CSI2_STATUS_IRQ_FS(x) | CSI2_STATUS_IRQ_FE(x) | \
>> + CSI2_STATUS_IRQ_FE_ACK(x) | CSI2_STATUS_IRQ_LE(x) | \
>> + CSI2_STATUS_IRQ_LE_ACK(x))
>> +#define CSI2_STATUS_IRQ_OVERFLOW BIT(20)
>> +#define CSI2_STATUS_IRQ_DISCARD_OVERFLOW BIT(21)
>> +#define CSI2_STATUS_IRQ_DISCARD_LEN_LIMIT BIT(22)
>> +#define CSI2_STATUS_IRQ_DISCARD_UNMATCHED BIT(23)
>> +#define CSI2_STATUS_IRQ_DISCARD_INACTIVE BIT(24)
>> +
>> +/* CSI2_CTRL */
>> +#define CSI2_CTRL_EOP_IS_EOL BIT(0)
>> +
>> +/* CSI2_CH_CTRL */
>> +#define CSI2_CH_CTRL_DMA_EN BIT(0)
>> +#define CSI2_CH_CTRL_FORCE BIT(3)
>> +#define CSI2_CH_CTRL_AUTO_ARM BIT(4)
>> +#define CSI2_CH_CTRL_IRQ_EN_FS BIT(13)
>> +#define CSI2_CH_CTRL_IRQ_EN_FE BIT(14)
>> +#define CSI2_CH_CTRL_IRQ_EN_FE_ACK BIT(15)
>> +#define CSI2_CH_CTRL_IRQ_EN_LE BIT(16)
>> +#define CSI2_CH_CTRL_IRQ_EN_LE_ACK BIT(17)
>> +#define CSI2_CH_CTRL_FLUSH_FE BIT(28)
>> +#define CSI2_CH_CTRL_PACK_LINE BIT(29)
>> +#define CSI2_CH_CTRL_PACK_BYTES BIT(30)
>> +#define CSI2_CH_CTRL_CH_MODE_MASK GENMASK(2, 1)
>> +#define CSI2_CH_CTRL_VC_MASK GENMASK(6, 5)
>> +#define CSI2_CH_CTRL_DT_MASK GENMASK(12, 7)
>> +#define CSI2_CH_CTRL_LC_MASK GENMASK(27, 18)
>> +
>> +/* CHx_COMPRESSION_CONTROL */
>> +#define CSI2_CH_COMP_CTRL_OFFSET_MASK GENMASK(15, 0)
>> +#define CSI2_CH_COMP_CTRL_SHIFT_MASK GENMASK(19, 16)
>> +#define CSI2_CH_COMP_CTRL_MODE_MASK GENMASK(25, 24)
>> +
>> +static inline u32 csi2_reg_read(struct csi2_device *csi2, u32 offset)
>> +{
>> + return readl(csi2->base + offset);
>> +}
>> +
>> +static inline void csi2_reg_write(struct csi2_device *csi2, u32 offset, u32 val)
>> +{
>> + writel(val, csi2->base + offset);
>> +}
>> +
>> +static inline void set_field(u32 *valp, u32 field, u32 mask)
>> +{
>> + u32 val = *valp;
>> +
>> + val &= ~mask;
>> + val |= (field << __ffs(mask)) & mask;
>> + *valp = val;
>> +}
>> +
>> +static int csi2_regs_show(struct seq_file *s, void *data)
>> +{
>> + struct csi2_device *csi2 = s->private;
>> + int ret;
>> +
>> + ret = pm_runtime_resume_and_get(csi2->v4l2_dev->dev);
>> + if (ret)
>> + return ret;
>> +
>> +#define DUMP(reg) seq_printf(s, #reg " \t0x%08x\n", csi2_reg_read(csi2, reg))
>> +#define DUMP_CH(idx, reg) seq_printf(s, #reg "(%u) \t0x%08x\n", idx, csi2_reg_read(csi2, reg(idx)))
>> +
>> + DUMP(CSI2_STATUS);
>> + DUMP(CSI2_DISCARDS_OVERFLOW);
>> + DUMP(CSI2_DISCARDS_INACTIVE);
>> + DUMP(CSI2_DISCARDS_UNMATCHED);
>> + DUMP(CSI2_DISCARDS_LEN_LIMIT);
>> + DUMP(CSI2_LLEV_PANICS);
>> + DUMP(CSI2_ULEV_PANICS);
>> + DUMP(CSI2_IRQ_MASK);
>> + DUMP(CSI2_CTRL);
>> +
>> + for (unsigned int i = 0; i < CSI2_NUM_CHANNELS; ++i) {
>> + DUMP_CH(i, CSI2_CH_CTRL);
>> + DUMP_CH(i, CSI2_CH_ADDR0);
>> + DUMP_CH(i, CSI2_CH_ADDR1);
>> + DUMP_CH(i, CSI2_CH_STRIDE);
>> + DUMP_CH(i, CSI2_CH_LENGTH);
>> + DUMP_CH(i, CSI2_CH_DEBUG);
>> + DUMP_CH(i, CSI2_CH_FRAME_SIZE);
>> + DUMP_CH(i, CSI2_CH_COMP_CTRL);
>> + DUMP_CH(i, CSI2_CH_FE_FRAME_ID);
>> + }
>> +
>> +#undef DUMP
>> +#undef DUMP_CH
>> +
>> + pm_runtime_put(csi2->v4l2_dev->dev);
>> +
>> + return 0;
>> +}
>> +
>> +DEFINE_SHOW_ATTRIBUTE(csi2_regs);
>> +
>> +static int csi2_errors_show(struct seq_file *s, void *data)
>> +{
>> + struct csi2_device *csi2 = s->private;
>> + unsigned long flags;
>> + u32 discards_table[DISCARDS_TABLE_NUM_VCS][DISCARDS_TABLE_NUM_ENTRIES];
>> + u32 discards_dt_table[DISCARDS_TABLE_NUM_ENTRIES];
>> + u32 overflows;
>> +
>> + spin_lock_irqsave(&csi2->errors_lock, flags);
>> +
>> + memcpy(discards_table, csi2->discards_table, sizeof(discards_table));
>> + memcpy(discards_dt_table, csi2->discards_dt_table,
>> + sizeof(discards_dt_table));
>> + overflows = csi2->overflows;
>> +
>> + csi2->overflows = 0;
>> + memset(csi2->discards_table, 0, sizeof(discards_table));
>> + memset(csi2->discards_dt_table, 0, sizeof(discards_dt_table));
>> +
>> + spin_unlock_irqrestore(&csi2->errors_lock, flags);
>> +
>> + seq_printf(s, "Overflows %u\n", overflows);
>> + seq_puts(s, "Discards:\n");
>> + seq_puts(s, "VC OVLF LEN UNMATCHED INACTIVE\n");
>> +
>> + for (unsigned int vc = 0; vc < DISCARDS_TABLE_NUM_VCS; ++vc) {
>> + seq_printf(s, "%u %10u %10u %10u %10u\n", vc,
>> + discards_table[vc][DISCARDS_TABLE_OVERFLOW],
>> + discards_table[vc][DISCARDS_TABLE_LENGTH_LIMIT],
>> + discards_table[vc][DISCARDS_TABLE_UNMATCHED],
>> + discards_table[vc][DISCARDS_TABLE_INACTIVE]);
>> + }
>> +
>> + seq_printf(s, "Last DT %10u %10u %10u %10u\n",
>> + discards_dt_table[DISCARDS_TABLE_OVERFLOW],
>> + discards_dt_table[DISCARDS_TABLE_LENGTH_LIMIT],
>> + discards_dt_table[DISCARDS_TABLE_UNMATCHED],
>> + discards_dt_table[DISCARDS_TABLE_INACTIVE]);
>> +
>> + return 0;
>> +}
>> +
>> +DEFINE_SHOW_ATTRIBUTE(csi2_errors);
>> +
>> +static void csi2_isr_handle_errors(struct csi2_device *csi2, u32 status)
>> +{
>> + spin_lock(&csi2->errors_lock);
>> +
>> + if (status & CSI2_STATUS_IRQ_OVERFLOW)
>> + csi2->overflows++;
>> +
>> + for (unsigned int i = 0; i < DISCARDS_TABLE_NUM_ENTRIES; ++i) {
>> + static const u32 discard_bits[] = {
>> + CSI2_STATUS_IRQ_DISCARD_OVERFLOW,
>> + CSI2_STATUS_IRQ_DISCARD_LEN_LIMIT,
>> + CSI2_STATUS_IRQ_DISCARD_UNMATCHED,
>> + CSI2_STATUS_IRQ_DISCARD_INACTIVE,
>> + };
>> + static const u8 discard_regs[] = {
>> + CSI2_DISCARDS_OVERFLOW,
>> + CSI2_DISCARDS_LEN_LIMIT,
>> + CSI2_DISCARDS_UNMATCHED,
>> + CSI2_DISCARDS_INACTIVE,
>> + };
>> + u32 amount;
>> + u8 dt, vc;
>> + u32 v;
>> +
>> + if (!(status & discard_bits[i]))
>> + continue;
>> +
>> + v = csi2_reg_read(csi2, discard_regs[i]);
>> + csi2_reg_write(csi2, discard_regs[i], 0);
>> +
>> + amount = (v & CSI2_DISCARDS_AMOUNT_MASK) >>
>> + CSI2_DISCARDS_AMOUNT_SHIFT;
>> + dt = (v & CSI2_DISCARDS_DT_MASK) >> CSI2_DISCARDS_DT_SHIFT;
>> + vc = (v & CSI2_DISCARDS_VC_MASK) >> CSI2_DISCARDS_VC_SHIFT;
>> +
>> + csi2->discards_table[vc][i] += amount;
>> + csi2->discards_dt_table[i] = dt;
>> + }
>> +
>> + spin_unlock(&csi2->errors_lock);
>> +}
>> +
>> +void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof)
>> +{
>> + u32 status;
>> +
>> + status = csi2_reg_read(csi2, CSI2_STATUS);
>> +
>> + /* Write value back to clear the interrupts */
>> + csi2_reg_write(csi2, CSI2_STATUS, status);
>> +
>> + for (unsigned int i = 0; i < CSI2_NUM_CHANNELS; i++) {
>> + u32 dbg;
>> +
>> + if ((status & CSI2_STATUS_IRQ_CH_MASK(i)) == 0)
>> + continue;
>> +
>> + dbg = csi2_reg_read(csi2, CSI2_CH_DEBUG(i));
>> +
>> + trace_csi2_irq(i, status, dbg);
>> +
>> + sof[i] = !!(status & CSI2_STATUS_IRQ_FS(i));
>> + eof[i] = !!(status & CSI2_STATUS_IRQ_FE_ACK(i));
>> + }
>> +
>> + if (csi2_track_errors)
>> + csi2_isr_handle_errors(csi2, status);
>> +}
>> +
>> +void csi2_set_buffer(struct csi2_device *csi2, unsigned int channel,
>> + dma_addr_t dmaaddr, unsigned int stride, unsigned int size)
>> +{
>> + u64 addr = dmaaddr;
>> + /*
>> + * ADDRESS0 must be written last as it triggers the double buffering
>> + * mechanism for all buffer registers within the hardware.
>> + */
>> + addr >>= 4;
>> + csi2_reg_write(csi2, CSI2_CH_LENGTH(channel), size >> 4);
>> + csi2_reg_write(csi2, CSI2_CH_STRIDE(channel), stride >> 4);
>> + csi2_reg_write(csi2, CSI2_CH_ADDR1(channel), addr >> 32);
>> + csi2_reg_write(csi2, CSI2_CH_ADDR0(channel), addr & 0xffffffff);
>> +}
>> +
>> +void csi2_set_compression(struct csi2_device *csi2, unsigned int channel,
>> + enum csi2_compression_mode mode, unsigned int shift,
>> + unsigned int offset)
>> +{
>> + u32 compression = 0;
>> +
>> + set_field(&compression, CSI2_CH_COMP_CTRL_OFFSET_MASK, offset);
>> + set_field(&compression, CSI2_CH_COMP_CTRL_SHIFT_MASK, shift);
>> + set_field(&compression, CSI2_CH_COMP_CTRL_MODE_MASK, mode);
>> + csi2_reg_write(csi2, CSI2_CH_COMP_CTRL(channel), compression);
>> +}
>> +
>> +void csi2_start_channel(struct csi2_device *csi2, unsigned int channel,
>> + enum csi2_mode mode, bool auto_arm, bool pack_bytes,
>> + unsigned int width, unsigned int height,
>> + u8 vc, u8 dt)
>> +{
>> + u32 ctrl;
>> +
>> + csi2_dbg("%s [%u]\n", __func__, channel);
>> +
>> + csi2_reg_write(csi2, CSI2_CH_CTRL(channel), 0);
>> + csi2_reg_write(csi2, CSI2_CH_DEBUG(channel), 0);
>> + csi2_reg_write(csi2, CSI2_STATUS, CSI2_STATUS_IRQ_CH_MASK(channel));
>> +
>> + /* Enable channel and FS/FE interrupts. */
>> + ctrl = CSI2_CH_CTRL_DMA_EN | CSI2_CH_CTRL_IRQ_EN_FS |
>> + CSI2_CH_CTRL_IRQ_EN_FE_ACK | CSI2_CH_CTRL_PACK_LINE;
>> + /* PACK_BYTES ensures no striding for embedded data. */
>> + if (pack_bytes)
>> + ctrl |= CSI2_CH_CTRL_PACK_BYTES;
>> +
>> + if (auto_arm)
>> + ctrl |= CSI2_CH_CTRL_AUTO_ARM;
>> +
>> + if (width && height) {
>> + set_field(&ctrl, mode, CSI2_CH_CTRL_CH_MODE_MASK);
>> + csi2_reg_write(csi2, CSI2_CH_FRAME_SIZE(channel),
>> + (height << 16) | width);
>> + } else {
>> + set_field(&ctrl, 0x0, CSI2_CH_CTRL_CH_MODE_MASK);
>> + csi2_reg_write(csi2, CSI2_CH_FRAME_SIZE(channel), 0);
>> + }
>> +
>> + set_field(&ctrl, vc, CSI2_CH_CTRL_VC_MASK);
>> + set_field(&ctrl, dt, CSI2_CH_CTRL_DT_MASK);
>> + csi2_reg_write(csi2, CSI2_CH_CTRL(channel), ctrl);
>> + csi2->num_lines[channel] = height;
>> +}
>> +
>> +void csi2_stop_channel(struct csi2_device *csi2, unsigned int channel)
>> +{
>> + csi2_dbg("%s [%u]\n", __func__, channel);
>> +
>> + /* Channel disable. Use FORCE to allow stopping mid-frame. */
>> + csi2_reg_write(csi2, CSI2_CH_CTRL(channel), CSI2_CH_CTRL_FORCE);
>> + /* Latch the above change by writing to the ADDR0 register. */
>> + csi2_reg_write(csi2, CSI2_CH_ADDR0(channel), 0);
>> + /* Write this again, the HW needs it! */
>> + csi2_reg_write(csi2, CSI2_CH_ADDR0(channel), 0);
>> +}
>> +
>> +void csi2_open_rx(struct csi2_device *csi2)
>> +{
>> + csi2_reg_write(csi2, CSI2_IRQ_MASK,
>> + csi2_track_errors ? CSI2_IRQ_MASK_IRQ_ALL : 0);
>> +
>> + dphy_start(&csi2->dphy);
>> +
>> + csi2_reg_write(csi2, CSI2_CTRL, CSI2_CTRL_EOP_IS_EOL);
>> +}
>> +
>> +void csi2_close_rx(struct csi2_device *csi2)
>> +{
>> + dphy_stop(&csi2->dphy);
>> +
>> + csi2_reg_write(csi2, CSI2_IRQ_MASK, 0);
>> +}
>> +
>> +static int csi2_init_state(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *state)
>> +{
>> + struct v4l2_subdev_route routes[] = { {
>> + .sink_pad = CSI2_PAD_SINK,
>> + .sink_stream = 0,
>> + .source_pad = CSI2_PAD_FIRST_SOURCE,
>> + .source_stream = 0,
>> + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
>> + } };
>> +
>> + struct v4l2_subdev_krouting routing = {
>> + .num_routes = ARRAY_SIZE(routes),
>> + .routes = routes,
>> + };
>> +
>> + int ret;
>> +
>> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, &routing,
>> + &cfe_default_format);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int csi2_pad_set_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *state,
>> + struct v4l2_subdev_format *format)
>> +{
>> + if (format->pad == CSI2_PAD_SINK) {
>> + /* Store the sink format and propagate it to the source. */
>> +
>> + const struct cfe_fmt *cfe_fmt;
>> +
>> + cfe_fmt = find_format_by_code(format->format.code);
>> + if (!cfe_fmt) {
>> + cfe_fmt = find_format_by_code(MEDIA_BUS_FMT_SRGGB10_1X10);
>> + format->format.code = cfe_fmt->code;
>> + }
>> +
>> + struct v4l2_mbus_framefmt *fmt;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, format->pad,
>> + format->stream);
>> + if (!fmt)
>> + return -EINVAL;
>> +
>> + *fmt = format->format;
>> +
>> + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
>> + format->stream);
>> + if (!fmt)
>> + return -EINVAL;
>> +
>> + format->format.field = V4L2_FIELD_NONE;
>> +
>> + *fmt = format->format;
>> + } else {
>> + /* Only allow changing the source pad mbus code. */
>> +
>> + struct v4l2_mbus_framefmt *sink_fmt, *source_fmt;
>> + u32 sink_code;
>> + u32 code;
>> +
>> + sink_fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
>> + format->stream);
>> + if (!sink_fmt)
>> + return -EINVAL;
>> +
>> + source_fmt = v4l2_subdev_state_get_format(state, format->pad,
>> + format->stream);
>> + if (!source_fmt)
>> + return -EINVAL;
>> +
>> + sink_code = sink_fmt->code;
>> + code = format->format.code;
>> +
>> + /*
>> + * Only allow changing the mbus code to:
>> + * - The sink's mbus code
>> + * - The 16-bit version of the sink's mbus code
>> + * - The compressed version of the sink's mbus code
>> + */
>> + if (code == sink_code ||
>> + code == cfe_find_16bit_code(sink_code) ||
>> + code == cfe_find_compressed_code(sink_code))
>> + source_fmt->code = code;
>> +
>> + format->format.code = source_fmt->code;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int csi2_set_routing(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *state,
>> + enum v4l2_subdev_format_whence which,
>> + struct v4l2_subdev_krouting *routing)
>> +{
>> + int ret;
>> +
>> + ret = v4l2_subdev_routing_validate(sd, routing,
>> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 |
>> + V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING);
>> + if (ret)
>> + return ret;
>> +
>> + /* Only stream ID 0 allowed on source pads */
>> + for (unsigned int i = 0; i < routing->num_routes; ++i) {
>> + const struct v4l2_subdev_route *route = &routing->routes[i];
>> +
>> + if (route->source_stream != 0)
>> + return -EINVAL;
>> + }
>> +
>> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
>> + &cfe_default_format);
>> + if (ret)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_subdev_pad_ops csi2_subdev_pad_ops = {
>> + .get_fmt = v4l2_subdev_get_fmt,
>> + .set_fmt = csi2_pad_set_fmt,
>> + .set_routing = csi2_set_routing,
>> + .link_validate = v4l2_subdev_link_validate_default,
>> +};
>> +
>> +static const struct media_entity_operations csi2_entity_ops = {
>> + .link_validate = v4l2_subdev_link_validate,
>> + .has_pad_interdep = v4l2_subdev_has_pad_interdep,
>> +};
>> +
>> +static const struct v4l2_subdev_ops csi2_subdev_ops = {
>> + .pad = &csi2_subdev_pad_ops,
>> +};
>> +
>> +static const struct v4l2_subdev_internal_ops csi2_internal_ops = {
>> + .init_state = csi2_init_state,
>> +};
>> +
>> +int csi2_init(struct csi2_device *csi2, struct dentry *debugfs)
>> +{
>> + unsigned int ret;
>> +
>> + spin_lock_init(&csi2->errors_lock);
>> +
>> + csi2->dphy.dev = csi2->v4l2_dev->dev;
>> + dphy_probe(&csi2->dphy);
>> +
>> + debugfs_create_file("csi2_regs", 0444, debugfs, csi2, &csi2_regs_fops);
>
> Should this reflect the device name? This will currently only work with one
> such device in the system.
These files are in a device specific directory, e.g.
"rp1-cfe:1f00110000.csi/".
> Also you might not want to make this world-readable.
Hmm, true, I'll drop the permission for "other".
>> +
>> + if (csi2_track_errors)
>> + debugfs_create_file("csi2_errors", 0444, debugfs, csi2,
>> + &csi2_errors_fops);
>> +
>> + csi2->pad[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>> +
>> + for (unsigned int i = CSI2_PAD_FIRST_SOURCE;
>> + i < CSI2_PAD_FIRST_SOURCE + CSI2_PAD_NUM_SOURCES; i++)
>> + csi2->pad[i].flags = MEDIA_PAD_FL_SOURCE;
>> +
>> + ret = media_entity_pads_init(&csi2->sd.entity, ARRAY_SIZE(csi2->pad),
>> + csi2->pad);
>> + if (ret)
>> + return ret;
>> +
>> + /* Initialize subdev */
>> + v4l2_subdev_init(&csi2->sd, &csi2_subdev_ops);
>> + csi2->sd.internal_ops = &csi2_internal_ops;
>> + csi2->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
>> + csi2->sd.entity.ops = &csi2_entity_ops;
>> + csi2->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
>> + csi2->sd.owner = THIS_MODULE;
>> + snprintf(csi2->sd.name, sizeof(csi2->sd.name), "csi2");
>> +
>> + ret = v4l2_subdev_init_finalize(&csi2->sd);
>> + if (ret)
>> + goto err_entity_cleanup;
>> +
>> + ret = v4l2_device_register_subdev(csi2->v4l2_dev, &csi2->sd);
>> + if (ret) {
>> + csi2_err("Failed register csi2 subdev (%d)\n", ret);
>> + goto err_subdev_cleanup;
>> + }
>> +
>> + return 0;
>> +
>> +err_subdev_cleanup:
>> + v4l2_subdev_cleanup(&csi2->sd);
>> +err_entity_cleanup:
>> + media_entity_cleanup(&csi2->sd.entity);
>> +
>> + return ret;
>> +}
>> +
>> +void csi2_uninit(struct csi2_device *csi2)
>> +{
>> + v4l2_device_unregister_subdev(&csi2->sd);
>> + v4l2_subdev_cleanup(&csi2->sd);
>> + media_entity_cleanup(&csi2->sd.entity);
>> +}
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/csi2.h b/drivers/media/platform/raspberrypi/rp1-cfe/csi2.h
>> new file mode 100644
>> index 000000000000..a8ee5de565fb
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/csi2.h
>> @@ -0,0 +1,89 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * RP1 CSI-2 Driver
>> + *
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + * Copyright (c) 2023-2024 Ideas on Board Oy
>> + */
>> +
>> +#ifndef _RP1_CSI2_
>> +#define _RP1_CSI2_
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/io.h>
>> +#include <linux/types.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-subdev.h>
>> +
>> +#include "dphy.h"
>> +
>> +#define CSI2_NUM_CHANNELS 4
>> +
>> +#define CSI2_PAD_SINK 0
>> +#define CSI2_PAD_FIRST_SOURCE 1
>> +#define CSI2_PAD_NUM_SOURCES 4
>> +#define CSI2_NUM_PADS 5
>> +
>> +#define DISCARDS_TABLE_NUM_VCS 4
>> +
>> +enum csi2_mode {
>> + CSI2_MODE_NORMAL = 0,
>> + CSI2_MODE_REMAP = 1,
>> + CSI2_MODE_COMPRESSED = 2,
>> + CSI2_MODE_FE_STREAMING = 3,
>> +};
>> +
>> +enum csi2_compression_mode {
>> + CSI2_COMPRESSION_DELTA = 1,
>> + CSI2_COMPRESSION_SIMPLE = 2,
>> + CSI2_COMPRESSION_COMBINED = 3,
>> +};
>> +
>> +enum discards_table_index {
>> + DISCARDS_TABLE_OVERFLOW = 0,
>> + DISCARDS_TABLE_LENGTH_LIMIT,
>> + DISCARDS_TABLE_UNMATCHED,
>> + DISCARDS_TABLE_INACTIVE,
>> + DISCARDS_TABLE_NUM_ENTRIES,
>> +};
>> +
>> +struct csi2_device {
>> + /* Parent V4l2 device */
>> + struct v4l2_device *v4l2_dev;
>> +
>> + void __iomem *base;
>> +
>> + struct dphy_data dphy;
>> +
>> + enum v4l2_mbus_type bus_type;
>> + unsigned int bus_flags;
>> + unsigned int num_lines[CSI2_NUM_CHANNELS];
>> +
>> + struct media_pad pad[CSI2_NUM_PADS];
>> + struct v4l2_subdev sd;
>> +
>> + /* lock for csi2 errors counters */
>> + spinlock_t errors_lock;
>> + u32 overflows;
>> + u32 discards_table[DISCARDS_TABLE_NUM_VCS][DISCARDS_TABLE_NUM_ENTRIES];
>> + u32 discards_dt_table[DISCARDS_TABLE_NUM_ENTRIES];
>> +};
>> +
>> +void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof);
>> +void csi2_set_buffer(struct csi2_device *csi2, unsigned int channel,
>> + dma_addr_t dmaaddr, unsigned int stride,
>> + unsigned int size);
>> +void csi2_set_compression(struct csi2_device *csi2, unsigned int channel,
>> + enum csi2_compression_mode mode, unsigned int shift,
>> + unsigned int offset);
>> +void csi2_start_channel(struct csi2_device *csi2, unsigned int channel,
>> + enum csi2_mode mode, bool auto_arm,
>> + bool pack_bytes, unsigned int width,
>> + unsigned int height, u8 vc, u8 dt);
>> +void csi2_stop_channel(struct csi2_device *csi2, unsigned int channel);
>> +void csi2_open_rx(struct csi2_device *csi2);
>> +void csi2_close_rx(struct csi2_device *csi2);
>> +int csi2_init(struct csi2_device *csi2, struct dentry *debugfs);
>> +void csi2_uninit(struct csi2_device *csi2);
>> +
>> +#endif
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/dphy.c b/drivers/media/platform/raspberrypi/rp1-cfe/dphy.c
>> new file mode 100644
>> index 000000000000..c9e4a94fb80c
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/dphy.c
>> @@ -0,0 +1,175 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * RP1 CSI-2 Driver
>> + *
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + * Copyright (c) 2023-2024 Ideas on Board Oy
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#include "dphy.h"
>> +
>> +#define dphy_dbg(fmt, arg...) dev_dbg(dphy->dev, fmt, ##arg)
>> +#define dphy_err(fmt, arg...) dev_err(dphy->dev, fmt, ##arg)
>> +
>> +/* DW dphy Host registers */
>> +#define DPHY_VERSION 0x000
>> +#define DPHY_N_LANES 0x004
>> +#define DPHY_RESETN 0x008
>> +#define DPHY_PHY_SHUTDOWNZ 0x040
>> +#define DPHY_PHY_RSTZ 0x044
>> +#define DPHY_PHY_RX 0x048
>> +#define DPHY_PHY_STOPSTATE 0x04c
>> +#define DPHY_PHY_TST_CTRL0 0x050
>> +#define DPHY_PHY_TST_CTRL1 0x054
>> +#define DPHY_PHY2_TST_CTRL0 0x058
>> +#define DPHY_PHY2_TST_CTRL1 0x05c
>> +
>> +/* DW dphy Host Transactions */
>> +#define DPHY_HS_RX_CTRL_LANE0_OFFSET 0x44
>> +#define DPHY_PLL_INPUT_DIV_OFFSET 0x17
>> +#define DPHY_PLL_LOOP_DIV_OFFSET 0x18
>> +#define DPHY_PLL_DIV_CTRL_OFFSET 0x19
>> +
>> +static u32 dw_csi2_host_read(struct dphy_data *dphy, u32 offset)
>> +{
>> + return readl(dphy->base + offset);
>> +}
>> +
>> +static void dw_csi2_host_write(struct dphy_data *dphy, u32 offset, u32 data)
>> +{
>> + writel(data, dphy->base + offset);
>> +}
>> +
>> +static void set_tstclr(struct dphy_data *dphy, u32 val)
>> +{
>> + u32 ctrl0 = dw_csi2_host_read(dphy, DPHY_PHY_TST_CTRL0);
>> +
>> + dw_csi2_host_write(dphy, DPHY_PHY_TST_CTRL0, (ctrl0 & ~1) | val);
>> +}
>> +
>> +static void set_tstclk(struct dphy_data *dphy, u32 val)
>> +{
>> + u32 ctrl0 = dw_csi2_host_read(dphy, DPHY_PHY_TST_CTRL0);
>> +
>> + dw_csi2_host_write(dphy, DPHY_PHY_TST_CTRL0, (ctrl0 & ~2) | (val << 1));
>> +}
>> +
>> +static uint8_t get_tstdout(struct dphy_data *dphy)
>> +{
>> + u32 ctrl1 = dw_csi2_host_read(dphy, DPHY_PHY_TST_CTRL1);
>> +
>> + return ((ctrl1 >> 8) & 0xff);
>> +}
>> +
>> +static void set_testen(struct dphy_data *dphy, u32 val)
>> +{
>> + u32 ctrl1 = dw_csi2_host_read(dphy, DPHY_PHY_TST_CTRL1);
>> +
>> + dw_csi2_host_write(dphy, DPHY_PHY_TST_CTRL1,
>> + (ctrl1 & ~(1 << 16)) | (val << 16));
>> +}
>> +
>> +static void set_testdin(struct dphy_data *dphy, u32 val)
>> +{
>> + u32 ctrl1 = dw_csi2_host_read(dphy, DPHY_PHY_TST_CTRL1);
>> +
>> + dw_csi2_host_write(dphy, DPHY_PHY_TST_CTRL1, (ctrl1 & ~0xff) | val);
>> +}
>> +
>> +static uint8_t dphy_transaction(struct dphy_data *dphy, u8 test_code,
>> + uint8_t test_data)
>> +{
>> + /* See page 101 of the MIPI DPHY databook. */
>> + set_tstclk(dphy, 1);
>> + set_testen(dphy, 0);
>> + set_testdin(dphy, test_code);
>> + set_testen(dphy, 1);
>> + set_tstclk(dphy, 0);
>> + set_testen(dphy, 0);
>> + set_testdin(dphy, test_data);
>> + set_tstclk(dphy, 1);
>> + return get_tstdout(dphy);
>> +}
>> +
>> +static void dphy_set_hsfreqrange(struct dphy_data *dphy, uint32_t mbps)
>> +{
>> + /* See Table 5-1 on page 65 of dphy databook */
>> + static const u16 hsfreqrange_table[][2] = {
>> + { 89, 0b000000 }, { 99, 0b010000 }, { 109, 0b100000 },
>> + { 129, 0b000001 }, { 139, 0b010001 }, { 149, 0b100001 },
>> + { 169, 0b000010 }, { 179, 0b010010 }, { 199, 0b100010 },
>> + { 219, 0b000011 }, { 239, 0b010011 }, { 249, 0b100011 },
>> + { 269, 0b000100 }, { 299, 0b010100 }, { 329, 0b000101 },
>> + { 359, 0b010101 }, { 399, 0b100101 }, { 449, 0b000110 },
>> + { 499, 0b010110 }, { 549, 0b000111 }, { 599, 0b010111 },
>> + { 649, 0b001000 }, { 699, 0b011000 }, { 749, 0b001001 },
>> + { 799, 0b011001 }, { 849, 0b101001 }, { 899, 0b111001 },
>> + { 949, 0b001010 }, { 999, 0b011010 }, { 1049, 0b101010 },
>> + { 1099, 0b111010 }, { 1149, 0b001011 }, { 1199, 0b011011 },
>> + { 1249, 0b101011 }, { 1299, 0b111011 }, { 1349, 0b001100 },
>> + { 1399, 0b011100 }, { 1449, 0b101100 }, { 1500, 0b111100 },
>> + };
>> + unsigned int i;
>> +
>> + if (mbps < 80 || mbps > 1500)
>> + dphy_err("DPHY: Datarate %u Mbps out of range\n", mbps);
>> +
>> + for (i = 0; i < ARRAY_SIZE(hsfreqrange_table) - 1; i++) {
>> + if (mbps <= hsfreqrange_table[i][0])
>> + break;
>> + }
>> +
>> + dphy_transaction(dphy, DPHY_HS_RX_CTRL_LANE0_OFFSET,
>> + hsfreqrange_table[i][1] << 1);
>> +}
>> +
>> +static void dphy_init(struct dphy_data *dphy)
>> +{
>> + dw_csi2_host_write(dphy, DPHY_PHY_RSTZ, 0);
>> + dw_csi2_host_write(dphy, DPHY_PHY_SHUTDOWNZ, 0);
>> + set_tstclk(dphy, 1);
>> + set_testen(dphy, 0);
>> + set_tstclr(dphy, 1);
>> + usleep_range(15, 20);
>> + set_tstclr(dphy, 0);
>> + usleep_range(15, 20);
>> +
>> + dphy_set_hsfreqrange(dphy, dphy->dphy_rate);
>> +
>> + usleep_range(5, 10);
>> + dw_csi2_host_write(dphy, DPHY_PHY_SHUTDOWNZ, 1);
>> + usleep_range(5, 10);
>> + dw_csi2_host_write(dphy, DPHY_PHY_RSTZ, 1);
>> +}
>> +
>> +void dphy_start(struct dphy_data *dphy)
>> +{
>> + dw_csi2_host_write(dphy, DPHY_N_LANES, (dphy->active_lanes - 1));
>> + dphy_init(dphy);
>> + dw_csi2_host_write(dphy, DPHY_RESETN, 0xffffffff);
>> + usleep_range(10, 50);
>> +}
>> +
>> +void dphy_stop(struct dphy_data *dphy)
>> +{
>> + /* Set only one lane (lane 0) as active (ON) */
>> + dw_csi2_host_write(dphy, DPHY_N_LANES, 0);
>> + dw_csi2_host_write(dphy, DPHY_RESETN, 0);
>> +}
>> +
>> +void dphy_probe(struct dphy_data *dphy)
>> +{
>> + u32 host_ver;
>> + u8 host_ver_major, host_ver_minor;
>> +
>> + host_ver = dw_csi2_host_read(dphy, DPHY_VERSION);
>> + host_ver_major = (u8)((host_ver >> 24) - '0');
>> + host_ver_minor = (u8)((host_ver >> 16) - '0');
>> + host_ver_minor = host_ver_minor * 10;
>> + host_ver_minor += (u8)((host_ver >> 8) - '0');
>> +
>> + dphy_dbg("DW dphy Host HW v%u.%u\n", host_ver_major, host_ver_minor);
>> +}
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/dphy.h b/drivers/media/platform/raspberrypi/rp1-cfe/dphy.h
>> new file mode 100644
>> index 000000000000..84fa370957cc
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/dphy.h
>> @@ -0,0 +1,27 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + * Copyright (c) 2023-2024 Ideas on Board Oy
>> + */
>> +
>> +#ifndef _RP1_DPHY_
>> +#define _RP1_DPHY_
>> +
>> +#include <linux/io.h>
>> +#include <linux/types.h>
>> +
>> +struct dphy_data {
>> + struct device *dev;
>> +
>> + void __iomem *base;
>> +
>> + u32 dphy_rate;
>> + u32 max_lanes;
>> + u32 active_lanes;
>> +};
>> +
>> +void dphy_probe(struct dphy_data *dphy);
>> +void dphy_start(struct dphy_data *dphy);
>> +void dphy_stop(struct dphy_data *dphy);
>> +
>> +#endif
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/pisp-fe.c b/drivers/media/platform/raspberrypi/rp1-cfe/pisp-fe.c
>> new file mode 100644
>> index 000000000000..9a845446eed1
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/pisp-fe.c
>> @@ -0,0 +1,581 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PiSP Front End Driver
>> + *
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + */
>> +
>> +#include <linux/bitops.h>
>> +#include <linux/delay.h>
>> +#include <linux/moduleparam.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/seq_file.h>
>> +
>> +#include <media/videobuf2-dma-contig.h>
>> +
>> +#include "cfe.h"
>> +#include "pisp-fe.h"
>> +
>> +#include "cfe-trace.h"
>> +
>> +#define FE_VERSION 0x000
>> +#define FE_CONTROL 0x004
>> +#define FE_STATUS 0x008
>> +#define FE_FRAME_STATUS 0x00c
>> +#define FE_ERROR_STATUS 0x010
>> +#define FE_OUTPUT_STATUS 0x014
>> +#define FE_INT_EN 0x018
>> +#define FE_INT_STATUS 0x01c
>> +
>> +/* CONTROL */
>> +#define FE_CONTROL_QUEUE BIT(0)
>> +#define FE_CONTROL_ABORT BIT(1)
>> +#define FE_CONTROL_RESET BIT(2)
>> +#define FE_CONTROL_LATCH_REGS BIT(3)
>> +
>> +/* INT_EN / INT_STATUS */
>> +#define FE_INT_EOF BIT(0)
>> +#define FE_INT_SOF BIT(1)
>> +#define FE_INT_LINES0 BIT(8)
>> +#define FE_INT_LINES1 BIT(9)
>> +#define FE_INT_STATS BIT(16)
>> +#define FE_INT_QREADY BIT(24)
>> +
>> +/* STATUS */
>> +#define FE_STATUS_QUEUED BIT(0)
>> +#define FE_STATUS_WAITING BIT(1)
>> +#define FE_STATUS_ACTIVE BIT(2)
>> +
>> +#define PISP_FE_CONFIG_BASE_OFFSET 0x0040
>> +
>> +#define PISP_FE_ENABLE_STATS_CLUSTER \
>> + (PISP_FE_ENABLE_STATS_CROP | PISP_FE_ENABLE_DECIMATE | \
>> + PISP_FE_ENABLE_BLC | PISP_FE_ENABLE_CDAF_STATS | \
>> + PISP_FE_ENABLE_AWB_STATS | PISP_FE_ENABLE_RGBY | \
>> + PISP_FE_ENABLE_LSC | PISP_FE_ENABLE_AGC_STATS)
>> +
>> +#define PISP_FE_ENABLE_OUTPUT_CLUSTER(i) \
>> + ((PISP_FE_ENABLE_CROP0 | PISP_FE_ENABLE_DOWNSCALE0 | \
>> + PISP_FE_ENABLE_COMPRESS0 | PISP_FE_ENABLE_OUTPUT0) << (4 * (i)))
>> +
>> +struct pisp_fe_config_param {
>> + u32 dirty_flags;
>> + u32 dirty_flags_extra;
>> + size_t offset;
>> + size_t size;
>> +};
>> +
>> +static const struct pisp_fe_config_param pisp_fe_config_map[] = {
>> + /* *_dirty_flag_extra types */
>> + { 0, PISP_FE_DIRTY_GLOBAL, offsetof(struct pisp_fe_config, global),
>> + sizeof(struct pisp_fe_global_config) },
>> + { 0, PISP_FE_DIRTY_FLOATING, offsetof(struct pisp_fe_config, floating_stats),
>> + sizeof(struct pisp_fe_floating_stats_config) },
>> + { 0, PISP_FE_DIRTY_OUTPUT_AXI, offsetof(struct pisp_fe_config, output_axi),
>> + sizeof(struct pisp_fe_output_axi_config) },
>> + /* *_dirty_flag types */
>> + { PISP_FE_ENABLE_INPUT, 0, offsetof(struct pisp_fe_config, input),
>> + sizeof(struct pisp_fe_input_config) },
>> + { PISP_FE_ENABLE_DECOMPRESS, 0, offsetof(struct pisp_fe_config, decompress),
>> + sizeof(struct pisp_decompress_config) },
>> + { PISP_FE_ENABLE_DECOMPAND, 0, offsetof(struct pisp_fe_config, decompand),
>> + sizeof(struct pisp_fe_decompand_config) },
>> + { PISP_FE_ENABLE_BLA, 0, offsetof(struct pisp_fe_config, bla),
>> + sizeof(struct pisp_bla_config) },
>> + { PISP_FE_ENABLE_DPC, 0, offsetof(struct pisp_fe_config, dpc),
>> + sizeof(struct pisp_fe_dpc_config) },
>> + { PISP_FE_ENABLE_STATS_CROP, 0, offsetof(struct pisp_fe_config, stats_crop),
>> + sizeof(struct pisp_fe_crop_config) },
>> + { PISP_FE_ENABLE_BLC, 0, offsetof(struct pisp_fe_config, blc),
>> + sizeof(struct pisp_bla_config) },
>> + { PISP_FE_ENABLE_CDAF_STATS, 0, offsetof(struct pisp_fe_config, cdaf_stats),
>> + sizeof(struct pisp_fe_cdaf_stats_config) },
>> + { PISP_FE_ENABLE_AWB_STATS, 0, offsetof(struct pisp_fe_config, awb_stats),
>> + sizeof(struct pisp_fe_awb_stats_config) },
>> + { PISP_FE_ENABLE_RGBY, 0, offsetof(struct pisp_fe_config, rgby),
>> + sizeof(struct pisp_fe_rgby_config) },
>> + { PISP_FE_ENABLE_LSC, 0, offsetof(struct pisp_fe_config, lsc),
>> + sizeof(struct pisp_fe_lsc_config) },
>> + { PISP_FE_ENABLE_AGC_STATS, 0, offsetof(struct pisp_fe_config, agc_stats),
>> + sizeof(struct pisp_agc_statistics) },
>> + { PISP_FE_ENABLE_CROP0, 0, offsetof(struct pisp_fe_config, ch[0].crop),
>> + sizeof(struct pisp_fe_crop_config) },
>> + { PISP_FE_ENABLE_DOWNSCALE0, 0, offsetof(struct pisp_fe_config, ch[0].downscale),
>> + sizeof(struct pisp_fe_downscale_config) },
>> + { PISP_FE_ENABLE_COMPRESS0, 0, offsetof(struct pisp_fe_config, ch[0].compress),
>> + sizeof(struct pisp_compress_config) },
>> + { PISP_FE_ENABLE_OUTPUT0, 0, offsetof(struct pisp_fe_config, ch[0].output),
>> + sizeof(struct pisp_fe_output_config) },
>> + { PISP_FE_ENABLE_CROP1, 0, offsetof(struct pisp_fe_config, ch[1].crop),
>> + sizeof(struct pisp_fe_crop_config) },
>> + { PISP_FE_ENABLE_DOWNSCALE1, 0, offsetof(struct pisp_fe_config, ch[1].downscale),
>> + sizeof(struct pisp_fe_downscale_config) },
>> + { PISP_FE_ENABLE_COMPRESS1, 0, offsetof(struct pisp_fe_config, ch[1].compress),
>> + sizeof(struct pisp_compress_config) },
>> + { PISP_FE_ENABLE_OUTPUT1, 0, offsetof(struct pisp_fe_config, ch[1].output),
>> + sizeof(struct pisp_fe_output_config) },
>> +};
>> +
>> +#define pisp_fe_dbg(fmt, arg...) dev_dbg(fe->v4l2_dev->dev, fmt, ##arg)
>> +#define pisp_fe_info(fmt, arg...) dev_info(fe->v4l2_dev->dev, fmt, ##arg)
>> +#define pisp_fe_err(fmt, arg...) dev_err(fe->v4l2_dev->dev, fmt, ##arg)
>
> Same here, fe should be an argumen there.
Same explanation here: adding the argument would just make the lines
longer, without any benefit I can see.
>> +
>> +static inline u32 pisp_fe_reg_read(struct pisp_fe_device *fe, u32 offset)
>> +{
>> + return readl(fe->base + offset);
>> +}
>> +
>> +static inline void pisp_fe_reg_write(struct pisp_fe_device *fe, u32 offset,
>> + u32 val)
>> +{
>> + writel(val, fe->base + offset);
>> +}
>> +
>> +static inline void pisp_fe_reg_write_relaxed(struct pisp_fe_device *fe,
>> + u32 offset, u32 val)
>> +{
>> + writel_relaxed(val, fe->base + offset);
>> +}
>> +
>> +static int pisp_fe_regs_show(struct seq_file *s, void *data)
>> +{
>> + struct pisp_fe_device *fe = s->private;
>> + int ret;
>> +
>> + ret = pm_runtime_resume_and_get(fe->v4l2_dev->dev);
>> + if (ret)
>> + return ret;
>> +
>> + pisp_fe_reg_write(fe, FE_CONTROL, FE_CONTROL_LATCH_REGS);
>> +
>> +#define DUMP(reg) seq_printf(s, #reg " \t0x%08x\n", pisp_fe_reg_read(fe, reg))
>> + DUMP(FE_VERSION);
>> + DUMP(FE_CONTROL);
>> + DUMP(FE_STATUS);
>> + DUMP(FE_FRAME_STATUS);
>> + DUMP(FE_ERROR_STATUS);
>> + DUMP(FE_OUTPUT_STATUS);
>> + DUMP(FE_INT_EN);
>> + DUMP(FE_INT_STATUS);
>> +#undef DUMP
>> +
>> + pm_runtime_put(fe->v4l2_dev->dev);
>> +
>> + return 0;
>> +}
>> +
>> +DEFINE_SHOW_ATTRIBUTE(pisp_fe_regs);
>> +
>> +static void pisp_fe_config_write(struct pisp_fe_device *fe,
>> + struct pisp_fe_config *config,
>> + unsigned int start_offset, unsigned int size)
>> +{
>> + const unsigned int max_offset =
>> + offsetof(struct pisp_fe_config, ch[PISP_FE_NUM_OUTPUTS]);
>> + unsigned int end_offset;
>> + u32 *cfg = (u32 *)config;
>> +
>> + start_offset = min(start_offset, max_offset);
>> + end_offset = min(start_offset + size, max_offset);
>> +
>> + cfg += start_offset >> 2;
>> + for (unsigned int i = start_offset; i < end_offset; i += 4, cfg++)
>> + pisp_fe_reg_write_relaxed(fe, PISP_FE_CONFIG_BASE_OFFSET + i,
>> + *cfg);
>> +}
>> +
>> +void pisp_fe_isr(struct pisp_fe_device *fe, bool *sof, bool *eof)
>> +{
>> + u32 status, int_status, out_status, frame_status, error_status;
>> +
>> + pisp_fe_reg_write(fe, FE_CONTROL, FE_CONTROL_LATCH_REGS);
>> + status = pisp_fe_reg_read(fe, FE_STATUS);
>> + out_status = pisp_fe_reg_read(fe, FE_OUTPUT_STATUS);
>> + frame_status = pisp_fe_reg_read(fe, FE_FRAME_STATUS);
>> + error_status = pisp_fe_reg_read(fe, FE_ERROR_STATUS);
>> +
>> + int_status = pisp_fe_reg_read(fe, FE_INT_STATUS);
>> + pisp_fe_reg_write(fe, FE_INT_STATUS, int_status);
>> +
>> + trace_fe_irq(status, out_status, frame_status, error_status,
>> + int_status);
>> +
>> + /* We do not report interrupts for the input/stream pad. */
>> + for (unsigned int i = 0; i < FE_NUM_PADS - 1; i++) {
>> + sof[i] = !!(int_status & FE_INT_SOF);
>> + eof[i] = !!(int_status & FE_INT_EOF);
>> + }
>> +}
>> +
>> +static bool pisp_fe_validate_output(struct pisp_fe_config const *cfg,
>> + unsigned int c, struct v4l2_format const *f)
>> +{
>> + unsigned int wbytes;
>> +
>> + wbytes = cfg->ch[c].output.format.width;
>> + if (cfg->ch[c].output.format.format & PISP_IMAGE_FORMAT_BPS_MASK)
>> + wbytes *= 2;
>> +
>> + /* Check output image dimensions are nonzero and not too big */
>> + if (cfg->ch[c].output.format.width < 2 ||
>> + cfg->ch[c].output.format.height < 2 ||
>> + cfg->ch[c].output.format.height > f->fmt.pix.height ||
>> + cfg->ch[c].output.format.stride > f->fmt.pix.bytesperline ||
>> + wbytes > f->fmt.pix.bytesperline)
>> + return false;
>> +
>> + /* Check for zero-sized crops, which could cause lockup */
>> + if ((cfg->global.enables & PISP_FE_ENABLE_CROP(c)) &&
>> + ((cfg->ch[c].crop.offset_x >= (cfg->input.format.width & ~1) ||
>> + cfg->ch[c].crop.offset_y >= cfg->input.format.height ||
>> + cfg->ch[c].crop.width < 2 || cfg->ch[c].crop.height < 2)))
>> + return false;
>> +
>> + if ((cfg->global.enables & PISP_FE_ENABLE_DOWNSCALE(c)) &&
>> + (cfg->ch[c].downscale.output_width < 2 ||
>> + cfg->ch[c].downscale.output_height < 2))
>> + return false;
>> +
>> + return true;
>> +}
>> +
>> +static bool pisp_fe_validate_stats(struct pisp_fe_config const *cfg)
>> +{
>> + /* Check for zero-sized crop, which could cause lockup */
>> + return (!(cfg->global.enables & PISP_FE_ENABLE_STATS_CROP) ||
>> + (cfg->stats_crop.offset_x < (cfg->input.format.width & ~1) &&
>> + cfg->stats_crop.offset_y < cfg->input.format.height &&
>> + cfg->stats_crop.width >= 2 && cfg->stats_crop.height >= 2));
>> +}
>> +
>> +int pisp_fe_validate_config(struct pisp_fe_device *fe,
>> + struct pisp_fe_config *cfg,
>> + struct v4l2_format const *f0,
>> + struct v4l2_format const *f1)
>> +{
>> + /*
>> + * Check the input is enabled, streaming and has nonzero size;
>> + * to avoid cases where the hardware might lock up or try to
>> + * read inputs from memory (which this driver doesn't support).
>> + */
>> + if (!(cfg->global.enables & PISP_FE_ENABLE_INPUT) ||
>> + cfg->input.streaming != 1 || cfg->input.format.width < 2 ||
>> + cfg->input.format.height < 2) {
>> + pisp_fe_err("%s: Input config not valid", __func__);
>> + return -EINVAL;
>> + }
>> +
>> + for (unsigned int i = 0; i < PISP_FE_NUM_OUTPUTS; i++) {
>> + if (!(cfg->global.enables & PISP_FE_ENABLE_OUTPUT(i))) {
>> + if (cfg->global.enables &
>> + PISP_FE_ENABLE_OUTPUT_CLUSTER(i)) {
>> + pisp_fe_err("%s: Output %u not valid",
>> + __func__, i);
>> + return -EINVAL;
>> + }
>> + continue;
>> + }
>> +
>> + if (!pisp_fe_validate_output(cfg, i, i ? f1 : f0))
>> + return -EINVAL;
>> + }
>> +
>> + if ((cfg->global.enables & PISP_FE_ENABLE_STATS_CLUSTER) &&
>> + !pisp_fe_validate_stats(cfg)) {
>> + pisp_fe_err("%s: Stats config not valid", __func__);
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void pisp_fe_submit_job(struct pisp_fe_device *fe, struct vb2_buffer **vb2_bufs,
>> + struct pisp_fe_config *cfg)
>> +{
>> + u64 addr;
>> + u32 status;
>> +
>> + /*
>> + * Check output buffers exist and outputs are correctly configured.
>> + * If valid, set the buffer's DMA address; otherwise disable.
>> + */
>> + for (unsigned int i = 0; i < PISP_FE_NUM_OUTPUTS; i++) {
>> + struct vb2_buffer *buf = vb2_bufs[FE_OUTPUT0_PAD + i];
>> +
>> + if (!(cfg->global.enables & PISP_FE_ENABLE_OUTPUT(i)))
>> + continue;
>> +
>> + addr = vb2_dma_contig_plane_dma_addr(buf, 0);
>> + cfg->output_buffer[i].addr_lo = addr & 0xffffffff;
>> + cfg->output_buffer[i].addr_hi = addr >> 32;
>> + }
>> +
>> + if (vb2_bufs[FE_STATS_PAD]) {
>> + addr = vb2_dma_contig_plane_dma_addr(vb2_bufs[FE_STATS_PAD], 0);
>> + cfg->stats_buffer.addr_lo = addr & 0xffffffff;
>> + cfg->stats_buffer.addr_hi = addr >> 32;
>> + }
>> +
>> + /* Set up ILINES interrupts 3/4 of the way down each output */
>> + cfg->ch[0].output.ilines =
>> + max(0x80u, (3u * cfg->ch[0].output.format.height) >> 2);
>> + cfg->ch[1].output.ilines =
>> + max(0x80u, (3u * cfg->ch[1].output.format.height) >> 2);
>> +
>> + /*
>> + * The hardware must have consumed the previous config by now.
>> + * This read of status also serves as a memory barrier before the
>> + * sequence of relaxed writes which follow.
>> + */
>> + status = pisp_fe_reg_read(fe, FE_STATUS);
>> + if (WARN_ON(status & FE_STATUS_QUEUED))
>> + return;
>> +
>> + /*
>> + * Unconditionally write buffers, global and input parameters.
>> + * Write cropping and output parameters whenever they are enabled.
>> + * Selectively write other parameters that have been marked as
>> + * changed through the dirty flags.
>> + */
>> + pisp_fe_config_write(fe, cfg, 0,
>> + offsetof(struct pisp_fe_config, decompress));
>> + cfg->dirty_flags_extra &= ~PISP_FE_DIRTY_GLOBAL;
>> + cfg->dirty_flags &= ~PISP_FE_ENABLE_INPUT;
>> + cfg->dirty_flags |= (cfg->global.enables &
>> + (PISP_FE_ENABLE_STATS_CROP |
>> + PISP_FE_ENABLE_OUTPUT_CLUSTER(0) |
>> + PISP_FE_ENABLE_OUTPUT_CLUSTER(1)));
>> + for (unsigned int i = 0; i < ARRAY_SIZE(pisp_fe_config_map); i++) {
>> + const struct pisp_fe_config_param *p = &pisp_fe_config_map[i];
>> +
>> + if (cfg->dirty_flags & p->dirty_flags ||
>> + cfg->dirty_flags_extra & p->dirty_flags_extra)
>> + pisp_fe_config_write(fe, cfg, p->offset, p->size);
>> + }
>> +
>> + /* This final non-relaxed write serves as a memory barrier */
>> + pisp_fe_reg_write(fe, FE_CONTROL, FE_CONTROL_QUEUE);
>> +}
>> +
>> +void pisp_fe_start(struct pisp_fe_device *fe)
>> +{
>> + pisp_fe_reg_write(fe, FE_CONTROL, FE_CONTROL_RESET);
>> + pisp_fe_reg_write(fe, FE_INT_STATUS, ~0);
>> + pisp_fe_reg_write(fe, FE_INT_EN, FE_INT_EOF | FE_INT_SOF | FE_INT_LINES0 | FE_INT_LINES1);
>> + fe->inframe_count = 0;
>> +}
>> +
>> +void pisp_fe_stop(struct pisp_fe_device *fe)
>> +{
>> + pisp_fe_reg_write(fe, FE_INT_EN, 0);
>> + pisp_fe_reg_write(fe, FE_CONTROL, FE_CONTROL_ABORT);
>> + usleep_range(1000, 2000);
>> + WARN_ON(pisp_fe_reg_read(fe, FE_STATUS));
>> + pisp_fe_reg_write(fe, FE_INT_STATUS, ~0);
>> +}
>> +
>> +static int pisp_fe_init_state(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *state)
>> +{
>> + struct v4l2_mbus_framefmt *fmt;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_STREAM_PAD);
>> + *fmt = cfe_default_format;
>> + fmt->code = MEDIA_BUS_FMT_SRGGB16_1X16;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_CONFIG_PAD);
>> + fmt->code = MEDIA_BUS_FMT_FIXED;
>> + fmt->width = sizeof(struct pisp_fe_config);
>> + fmt->height = 1;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_OUTPUT0_PAD);
>> + *fmt = cfe_default_format;
>> + fmt->code = MEDIA_BUS_FMT_SRGGB16_1X16;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_OUTPUT1_PAD);
>> + *fmt = cfe_default_format;
>> + fmt->code = MEDIA_BUS_FMT_SRGGB16_1X16;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_STATS_PAD);
>> + fmt->code = MEDIA_BUS_FMT_FIXED;
>> + fmt->width = sizeof(struct pisp_statistics);
>> + fmt->height = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static int pisp_fe_pad_set_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_state *state,
>> + struct v4l2_subdev_format *format)
>> +{
>> + struct v4l2_mbus_framefmt *fmt;
>> + const struct cfe_fmt *cfe_fmt;
>> +
>> + /* TODO: format propagation to source pads */
>> + /* TODO: format validation */
>> +
>> + switch (format->pad) {
>> + case FE_STREAM_PAD:
>> + cfe_fmt = find_format_by_code(format->format.code);
>> + if (!cfe_fmt || !(cfe_fmt->flags & CFE_FORMAT_FLAG_FE_OUT))
>> + cfe_fmt = find_format_by_code(MEDIA_BUS_FMT_SRGGB16_1X16);
>> +
>> + format->format.code = cfe_fmt->code;
>> + format->format.field = V4L2_FIELD_NONE;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_STREAM_PAD);
>> + *fmt = format->format;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_OUTPUT0_PAD);
>> + *fmt = format->format;
>> +
>> + fmt = v4l2_subdev_state_get_format(state, FE_OUTPUT1_PAD);
>> + *fmt = format->format;
>> +
>> + return 0;
>> +
>> + case FE_OUTPUT0_PAD:
>> + case FE_OUTPUT1_PAD: {
>> + /*
>> + * TODO: we should allow scaling and cropping by allowing the
>> + * user to set the size here.
>> + */
>> + struct v4l2_mbus_framefmt *sink_fmt, *source_fmt;
>> + u32 sink_code;
>> + u32 code;
>> +
>> + cfe_fmt = find_format_by_code(format->format.code);
>> + if (!cfe_fmt || !(cfe_fmt->flags & CFE_FORMAT_FLAG_FE_OUT))
>> + cfe_fmt = find_format_by_code(MEDIA_BUS_FMT_SRGGB16_1X16);
>> +
>> + format->format.code = cfe_fmt->code;
>> +
>> + sink_fmt = v4l2_subdev_state_get_format(state, FE_STREAM_PAD);
>> + if (!sink_fmt)
>> + return -EINVAL;
>> +
>> + source_fmt = v4l2_subdev_state_get_format(state, format->pad);
>> + if (!source_fmt)
>> + return -EINVAL;
>> +
>> + sink_code = sink_fmt->code;
>> + code = format->format.code;
>> +
>> + /*
>> + * If the source code from the user does not match the code in
>> + * the sink pad, check that the source code matches the
>> + * compressed version of the sink code.
>> + */
>> +
>> + if (code != sink_code &&
>> + code == cfe_find_compressed_code(sink_code))
>> + source_fmt->code = code;
>> +
>> + return 0;
>> + }
>> +
>> + case FE_CONFIG_PAD:
>> + case FE_STATS_PAD:
>> + default:
>> + return v4l2_subdev_get_fmt(sd, state, format);
>> + }
>> +}
>> +
>> +static const struct v4l2_subdev_pad_ops pisp_fe_subdev_pad_ops = {
>> + .get_fmt = v4l2_subdev_get_fmt,
>> + .set_fmt = pisp_fe_pad_set_fmt,
>> + .link_validate = v4l2_subdev_link_validate_default,
>> +};
>> +
>> +static int pisp_fe_link_validate(struct media_link *link)
>> +{
>> + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(link->sink->entity);
>> + struct pisp_fe_device *fe = container_of(sd, struct pisp_fe_device, sd);
>> +
>> + pisp_fe_dbg("%s: link \"%s\":%u -> \"%s\":%u\n", __func__,
>> + link->source->entity->name, link->source->index,
>> + link->sink->entity->name, link->sink->index);
>> +
>> + if (link->sink->index == FE_STREAM_PAD)
>> + return v4l2_subdev_link_validate(link);
>> +
>> + if (link->sink->index == FE_CONFIG_PAD)
>> + return 0;
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static const struct media_entity_operations pisp_fe_entity_ops = {
>> + .link_validate = pisp_fe_link_validate,
>> +};
>> +
>> +static const struct v4l2_subdev_ops pisp_fe_subdev_ops = {
>> + .pad = &pisp_fe_subdev_pad_ops,
>> +};
>> +
>> +static const struct v4l2_subdev_internal_ops pisp_fe_internal_ops = {
>> + .init_state = pisp_fe_init_state,
>> +};
>> +
>> +int pisp_fe_init(struct pisp_fe_device *fe, struct dentry *debugfs)
>> +{
>> + int ret;
>> +
>> + debugfs_create_file("fe_regs", 0444, debugfs, fe, &pisp_fe_regs_fops);
>
> The same regarding this file.
I'll fix the permissions.
Tomi
>> +
>> + fe->hw_revision = pisp_fe_reg_read(fe, FE_VERSION);
>> + pisp_fe_info("PiSP FE HW v%u.%u\n",
>> + (fe->hw_revision >> 24) & 0xff,
>> + (fe->hw_revision >> 20) & 0x0f);
>> +
>> + fe->pad[FE_STREAM_PAD].flags =
>> + MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT;
>> + fe->pad[FE_CONFIG_PAD].flags = MEDIA_PAD_FL_SINK;
>> + fe->pad[FE_OUTPUT0_PAD].flags = MEDIA_PAD_FL_SOURCE;
>> + fe->pad[FE_OUTPUT1_PAD].flags = MEDIA_PAD_FL_SOURCE;
>> + fe->pad[FE_STATS_PAD].flags = MEDIA_PAD_FL_SOURCE;
>> +
>> + ret = media_entity_pads_init(&fe->sd.entity, ARRAY_SIZE(fe->pad),
>> + fe->pad);
>> + if (ret)
>> + return ret;
>> +
>> + /* Initialize subdev */
>> + v4l2_subdev_init(&fe->sd, &pisp_fe_subdev_ops);
>> + fe->sd.internal_ops = &pisp_fe_internal_ops;
>> + fe->sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
>> + fe->sd.entity.ops = &pisp_fe_entity_ops;
>> + fe->sd.entity.name = "pisp-fe";
>> + fe->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
>> + fe->sd.owner = THIS_MODULE;
>> + snprintf(fe->sd.name, sizeof(fe->sd.name), "pisp-fe");
>> +
>> + ret = v4l2_subdev_init_finalize(&fe->sd);
>> + if (ret)
>> + goto err_entity_cleanup;
>> +
>> + ret = v4l2_device_register_subdev(fe->v4l2_dev, &fe->sd);
>> + if (ret) {
>> + pisp_fe_err("Failed register pisp fe subdev (%d)\n", ret);
>> + goto err_subdev_cleanup;
>> + }
>> +
>> + /* Must be in IDLE state (STATUS == 0) here. */
>> + WARN_ON(pisp_fe_reg_read(fe, FE_STATUS));
>> +
>> + return 0;
>> +
>> +err_subdev_cleanup:
>> + v4l2_subdev_cleanup(&fe->sd);
>> +err_entity_cleanup:
>> + media_entity_cleanup(&fe->sd.entity);
>> +
>> + return ret;
>> +}
>> +
>> +void pisp_fe_uninit(struct pisp_fe_device *fe)
>> +{
>> + v4l2_device_unregister_subdev(&fe->sd);
>> + v4l2_subdev_cleanup(&fe->sd);
>> + media_entity_cleanup(&fe->sd.entity);
>> +}
>> diff --git a/drivers/media/platform/raspberrypi/rp1-cfe/pisp-fe.h b/drivers/media/platform/raspberrypi/rp1-cfe/pisp-fe.h
>> new file mode 100644
>> index 000000000000..54d506e19cf2
>> --- /dev/null
>> +++ b/drivers/media/platform/raspberrypi/rp1-cfe/pisp-fe.h
>> @@ -0,0 +1,53 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * PiSP Front End Driver
>> + *
>> + * Copyright (c) 2021-2024 Raspberry Pi Ltd.
>> + */
>> +#ifndef _PISP_FE_H_
>> +#define _PISP_FE_H_
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/io.h>
>> +#include <linux/types.h>
>> +#include <linux/videodev2.h>
>> +
>> +#include <media/media-device.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-subdev.h>
>> +
>> +#include <linux/media/raspberrypi/pisp_fe_config.h>
>> +
>> +enum pisp_fe_pads {
>> + FE_STREAM_PAD,
>> + FE_CONFIG_PAD,
>> + FE_OUTPUT0_PAD,
>> + FE_OUTPUT1_PAD,
>> + FE_STATS_PAD,
>> + FE_NUM_PADS
>> +};
>> +
>> +struct pisp_fe_device {
>> + /* Parent V4l2 device */
>> + struct v4l2_device *v4l2_dev;
>> + void __iomem *base;
>> + u32 hw_revision;
>> +
>> + u16 inframe_count;
>> + struct media_pad pad[FE_NUM_PADS];
>> + struct v4l2_subdev sd;
>> +};
>> +
>> +void pisp_fe_isr(struct pisp_fe_device *fe, bool *sof, bool *eof);
>> +int pisp_fe_validate_config(struct pisp_fe_device *fe,
>> + struct pisp_fe_config *cfg,
>> + struct v4l2_format const *f0,
>> + struct v4l2_format const *f1);
>> +void pisp_fe_submit_job(struct pisp_fe_device *fe, struct vb2_buffer **vb2_bufs,
>> + struct pisp_fe_config *cfg);
>> +void pisp_fe_start(struct pisp_fe_device *fe);
>> +void pisp_fe_stop(struct pisp_fe_device *fe);
>> +int pisp_fe_init(struct pisp_fe_device *fe, struct dentry *debugfs);
>> +void pisp_fe_uninit(struct pisp_fe_device *fe);
>> +
>> +#endif
>> diff --git a/include/uapi/linux/media/raspberrypi/pisp_fe_config.h b/include/uapi/linux/media/raspberrypi/pisp_fe_config.h
>> new file mode 100644
>> index 000000000000..77237460a3b5
>> --- /dev/null
>> +++ b/include/uapi/linux/media/raspberrypi/pisp_fe_config.h
>> @@ -0,0 +1,273 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
>> +/*
>> + * RP1 PiSP Front End Driver Configuration structures
>> + *
>> + * Copyright (C) 2021 - Raspberry Pi Ltd.
>> + *
>> + */
>> +#ifndef _UAPI_PISP_FE_CONFIG_
>> +#define _UAPI_PISP_FE_CONFIG_
>> +
>> +#include <linux/types.h>
>> +
>> +#include "pisp_common.h"
>> +#include "pisp_fe_statistics.h"
>> +
>> +#define PISP_FE_NUM_OUTPUTS 2
>> +
>> +enum pisp_fe_enable {
>> + PISP_FE_ENABLE_INPUT = 0x000001,
>> + PISP_FE_ENABLE_DECOMPRESS = 0x000002,
>> + PISP_FE_ENABLE_DECOMPAND = 0x000004,
>> + PISP_FE_ENABLE_BLA = 0x000008,
>> + PISP_FE_ENABLE_DPC = 0x000010,
>> + PISP_FE_ENABLE_STATS_CROP = 0x000020,
>> + PISP_FE_ENABLE_DECIMATE = 0x000040,
>> + PISP_FE_ENABLE_BLC = 0x000080,
>> + PISP_FE_ENABLE_CDAF_STATS = 0x000100,
>> + PISP_FE_ENABLE_AWB_STATS = 0x000200,
>> + PISP_FE_ENABLE_RGBY = 0x000400,
>> + PISP_FE_ENABLE_LSC = 0x000800,
>> + PISP_FE_ENABLE_AGC_STATS = 0x001000,
>> + PISP_FE_ENABLE_CROP0 = 0x010000,
>> + PISP_FE_ENABLE_DOWNSCALE0 = 0x020000,
>> + PISP_FE_ENABLE_COMPRESS0 = 0x040000,
>> + PISP_FE_ENABLE_OUTPUT0 = 0x080000,
>> + PISP_FE_ENABLE_CROP1 = 0x100000,
>> + PISP_FE_ENABLE_DOWNSCALE1 = 0x200000,
>> + PISP_FE_ENABLE_COMPRESS1 = 0x400000,
>> + PISP_FE_ENABLE_OUTPUT1 = 0x800000
>> +};
>> +
>> +#define PISP_FE_ENABLE_CROP(i) (PISP_FE_ENABLE_CROP0 << (4 * (i)))
>> +#define PISP_FE_ENABLE_DOWNSCALE(i) (PISP_FE_ENABLE_DOWNSCALE0 << (4 * (i)))
>> +#define PISP_FE_ENABLE_COMPRESS(i) (PISP_FE_ENABLE_COMPRESS0 << (4 * (i)))
>> +#define PISP_FE_ENABLE_OUTPUT(i) (PISP_FE_ENABLE_OUTPUT0 << (4 * (i)))
>> +
>> +/*
>> + * We use the enable flags to show when blocks are "dirty", but we need some
>> + * extra ones too.
>> + */
>> +enum pisp_fe_dirty {
>> + PISP_FE_DIRTY_GLOBAL = 0x0001,
>> + PISP_FE_DIRTY_FLOATING = 0x0002,
>> + PISP_FE_DIRTY_OUTPUT_AXI = 0x0004
>> +};
>> +
>> +struct pisp_fe_global_config {
>> + __u32 enables;
>> + __u8 bayer_order;
>> + __u8 pad[3];
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_input_axi_config {
>> + /* burst length minus one, in the range 0..15; OR'd with flags */
>> + __u8 maxlen_flags;
>> + /* { prot[2:0], cache[3:0] } fields */
>> + __u8 cache_prot;
>> + /* QoS (only 4 LS bits are used) */
>> + __u16 qos;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_output_axi_config {
>> + /* burst length minus one, in the range 0..15; OR'd with flags */
>> + __u8 maxlen_flags;
>> + /* { prot[2:0], cache[3:0] } fields */
>> + __u8 cache_prot;
>> + /* QoS (4 bitfields of 4 bits each for different panic levels) */
>> + __u16 qos;
>> + /* For Panic mode: Output FIFO panic threshold */
>> + __u16 thresh;
>> + /* For Panic mode: Output FIFO statistics throttle threshold */
>> + __u16 throttle;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_input_config {
>> + __u8 streaming;
>> + __u8 pad[3];
>> + struct pisp_image_format_config format;
>> + struct pisp_fe_input_axi_config axi;
>> + /* Extra cycles delay before issuing each burst request */
>> + __u8 holdoff;
>> + __u8 pad2[3];
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_output_config {
>> + struct pisp_image_format_config format;
>> + __u16 ilines;
>> + __u8 pad[2];
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_input_buffer_config {
>> + __u32 addr_lo;
>> + __u32 addr_hi;
>> + __u16 frame_id;
>> + __u16 pad;
>> +} __attribute__((packed));
>> +
>> +#define PISP_FE_DECOMPAND_LUT_SIZE 65
>> +
>> +struct pisp_fe_decompand_config {
>> + __u16 lut[PISP_FE_DECOMPAND_LUT_SIZE];
>> + __u16 pad;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_dpc_config {
>> + __u8 coeff_level;
>> + __u8 coeff_range;
>> + __u8 coeff_range2;
>> +#define PISP_FE_DPC_FLAG_FOLDBACK 1
>> +#define PISP_FE_DPC_FLAG_VFLAG 2
>> + __u8 flags;
>> +} __attribute__((packed));
>> +
>> +#define PISP_FE_LSC_LUT_SIZE 16
>> +
>> +struct pisp_fe_lsc_config {
>> + __u8 shift;
>> + __u8 pad0;
>> + __u16 scale;
>> + __u16 centre_x;
>> + __u16 centre_y;
>> + __u16 lut[PISP_FE_LSC_LUT_SIZE];
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_rgby_config {
>> + __u16 gain_r;
>> + __u16 gain_g;
>> + __u16 gain_b;
>> + __u8 maxflag;
>> + __u8 pad;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_agc_stats_config {
>> + __u16 offset_x;
>> + __u16 offset_y;
>> + __u16 size_x;
>> + __u16 size_y;
>> + /* each weight only 4 bits */
>> + __u8 weights[PISP_AGC_STATS_NUM_ZONES / 2];
>> + __u16 row_offset_x;
>> + __u16 row_offset_y;
>> + __u16 row_size_x;
>> + __u16 row_size_y;
>> + __u8 row_shift;
>> + __u8 float_shift;
>> + __u8 pad1[2];
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_awb_stats_config {
>> + __u16 offset_x;
>> + __u16 offset_y;
>> + __u16 size_x;
>> + __u16 size_y;
>> + __u8 shift;
>> + __u8 pad[3];
>> + __u16 r_lo;
>> + __u16 r_hi;
>> + __u16 g_lo;
>> + __u16 g_hi;
>> + __u16 b_lo;
>> + __u16 b_hi;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_floating_stats_region {
>> + __u16 offset_x;
>> + __u16 offset_y;
>> + __u16 size_x;
>> + __u16 size_y;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_floating_stats_config {
>> + struct pisp_fe_floating_stats_region
>> + regions[PISP_FLOATING_STATS_NUM_ZONES];
>> +} __attribute__((packed));
>> +
>> +#define PISP_FE_CDAF_NUM_WEIGHTS 8
>> +
>> +struct pisp_fe_cdaf_stats_config {
>> + __u16 noise_constant;
>> + __u16 noise_slope;
>> + __u16 offset_x;
>> + __u16 offset_y;
>> + __u16 size_x;
>> + __u16 size_y;
>> + __u16 skip_x;
>> + __u16 skip_y;
>> + __u32 mode;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_stats_buffer_config {
>> + __u32 addr_lo;
>> + __u32 addr_hi;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_crop_config {
>> + __u16 offset_x;
>> + __u16 offset_y;
>> + __u16 width;
>> + __u16 height;
>> +} __attribute__((packed));
>> +
>> +enum pisp_fe_downscale_flags {
>> + /* downscale the four Bayer components independently... */
>> + DOWNSCALE_BAYER = 1,
>> + /* ...without trying to preserve their spatial relationship */
>> + DOWNSCALE_BIN = 2,
>> +};
>> +
>> +struct pisp_fe_downscale_config {
>> + __u8 xin;
>> + __u8 xout;
>> + __u8 yin;
>> + __u8 yout;
>> + __u8 flags; /* enum pisp_fe_downscale_flags */
>> + __u8 pad[3];
>> + __u16 output_width;
>> + __u16 output_height;
>> +} __attribute__((packed));
>> +
>> +struct pisp_fe_output_buffer_config {
>> + __u32 addr_lo;
>> + __u32 addr_hi;
>> +} __attribute__((packed));
>> +
>> +/* Each of the two output channels/branches: */
>> +struct pisp_fe_output_branch_config {
>> + struct pisp_fe_crop_config crop;
>> + struct pisp_fe_downscale_config downscale;
>> + struct pisp_compress_config compress;
>> + struct pisp_fe_output_config output;
>> + __u32 pad;
>> +} __attribute__((packed));
>> +
>> +/* And finally one to rule them all: */
>> +struct pisp_fe_config {
>> + /* I/O configuration: */
>> + struct pisp_fe_stats_buffer_config stats_buffer;
>> + struct pisp_fe_output_buffer_config output_buffer[PISP_FE_NUM_OUTPUTS];
>> + struct pisp_fe_input_buffer_config input_buffer;
>> + /* processing configuration: */
>> + struct pisp_fe_global_config global;
>> + struct pisp_fe_input_config input;
>> + struct pisp_decompress_config decompress;
>> + struct pisp_fe_decompand_config decompand;
>> + struct pisp_bla_config bla;
>> + struct pisp_fe_dpc_config dpc;
>> + struct pisp_fe_crop_config stats_crop;
>> + __u32 spare1; /* placeholder for future decimate configuration */
>> + struct pisp_bla_config blc;
>> + struct pisp_fe_rgby_config rgby;
>> + struct pisp_fe_lsc_config lsc;
>> + struct pisp_fe_agc_stats_config agc_stats;
>> + struct pisp_fe_awb_stats_config awb_stats;
>> + struct pisp_fe_cdaf_stats_config cdaf_stats;
>> + struct pisp_fe_floating_stats_config floating_stats;
>> + struct pisp_fe_output_axi_config output_axi;
>> + struct pisp_fe_output_branch_config ch[PISP_FE_NUM_OUTPUTS];
>> + /* non-register fields: */
>> + __u32 dirty_flags; /* these use pisp_fe_enable */
>> + __u32 dirty_flags_extra; /* these use pisp_fe_dirty */
>> +} __attribute__((packed));
>> +
>> +#endif /* _UAPI_PISP_FE_CONFIG_ */
>> diff --git a/include/uapi/linux/media/raspberrypi/pisp_fe_statistics.h b/include/uapi/linux/media/raspberrypi/pisp_fe_statistics.h
>> new file mode 100644
>> index 000000000000..a7d42985aee8
>> --- /dev/null
>> +++ b/include/uapi/linux/media/raspberrypi/pisp_fe_statistics.h
>> @@ -0,0 +1,64 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
>> +/*
>> + * RP1 PiSP Front End statistics definitions
>> + *
>> + * Copyright (C) 2021 - Raspberry Pi Ltd.
>> + *
>> + */
>> +#ifndef _UAPI_PISP_FE_STATISTICS_H_
>> +#define _UAPI_PISP_FE_STATISTICS_H_
>> +
>> +#include <linux/types.h>
>> +
>> +#define PISP_FLOATING_STATS_NUM_ZONES 4
>> +#define PISP_AGC_STATS_NUM_BINS 1024
>> +#define PISP_AGC_STATS_SIZE 16
>> +#define PISP_AGC_STATS_NUM_ZONES (PISP_AGC_STATS_SIZE * PISP_AGC_STATS_SIZE)
>> +#define PISP_AGC_STATS_NUM_ROW_SUMS 512
>> +
>> +struct pisp_agc_statistics_zone {
>> + __u64 Y_sum;
>> + __u32 counted;
>> + __u32 pad;
>> +} __attribute__((packed));
>> +
>> +struct pisp_agc_statistics {
>> + __u32 row_sums[PISP_AGC_STATS_NUM_ROW_SUMS];
>> + /*
>> + * 32-bits per bin means an image (just less than) 16384x16384 pixels
>> + * in size can weight every pixel from 0 to 15.
>> + */
>> + __u32 histogram[PISP_AGC_STATS_NUM_BINS];
>> + struct pisp_agc_statistics_zone floating[PISP_FLOATING_STATS_NUM_ZONES];
>> +} __attribute__((packed));
>> +
>> +#define PISP_AWB_STATS_SIZE 32
>> +#define PISP_AWB_STATS_NUM_ZONES (PISP_AWB_STATS_SIZE * PISP_AWB_STATS_SIZE)
>> +
>> +struct pisp_awb_statistics_zone {
>> + __u32 R_sum;
>> + __u32 G_sum;
>> + __u32 B_sum;
>> + __u32 counted;
>> +} __attribute__((packed));
>> +
>> +struct pisp_awb_statistics {
>> + struct pisp_awb_statistics_zone zones[PISP_AWB_STATS_NUM_ZONES];
>> + struct pisp_awb_statistics_zone floating[PISP_FLOATING_STATS_NUM_ZONES];
>> +} __attribute__((packed));
>> +
>> +#define PISP_CDAF_STATS_SIZE 8
>> +#define PISP_CDAF_STATS_NUM_FOMS (PISP_CDAF_STATS_SIZE * PISP_CDAF_STATS_SIZE)
>> +
>> +struct pisp_cdaf_statistics {
>> + __u64 foms[PISP_CDAF_STATS_NUM_FOMS];
>> + __u64 floating[PISP_FLOATING_STATS_NUM_ZONES];
>> +} __attribute__((packed));
>> +
>> +struct pisp_statistics {
>> + struct pisp_awb_statistics awb;
>> + struct pisp_agc_statistics agc;
>> + struct pisp_cdaf_statistics cdaf;
>> +} __attribute__((packed));
>> +
>> +#endif /* _UAPI_PISP_FE_STATISTICS_H_ */
>>
>
Powered by blists - more mailing lists