[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240902-net-next-mptcp-mib-mpjtx-misc-v1-9-d3e0f3773b90@kernel.org>
Date: Mon, 02 Sep 2024 12:46:00 +0200
From: "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
To: mptcp@...ts.linux.dev, Mat Martineau <martineau@...nel.org>,
Geliang Tang <geliang@...nel.org>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Shuah Khan <shuah@...nel.org>
Cc: netdev@...r.kernel.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org, "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
Subject: [PATCH net-next 09/11] selftests: mptcp: join: mute errors when
ran in the background
The test is supposed to be killed before the end, which will likely
cause "Connection reset by peer" errors. It is confusing, especially
because in case of real transfer errors, the test will not be marked as
failed. But that's OK, there are many other tests checking that.
Reviewed-by: Geliang Tang <geliang@...nel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@...nel.org>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 36 ++++++++++++-------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 321197d8977e..5d164abc18e5 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -3542,8 +3542,8 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns2 2 2
- speed=5 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { speed=5 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns1
userspace_pm_add_addr $ns1 10.0.2.1 10
@@ -3575,8 +3575,8 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 1
- speed=5 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { speed=5 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns2
userspace_pm_add_sf $ns2 10.0.3.2 20
@@ -3603,8 +3603,8 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 1
- speed=5 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { speed=5 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns2
chk_mptcp_info subflows 0 subflows 0
@@ -3624,8 +3624,8 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 1
- speed=5 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { speed=5 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns2
userspace_pm_add_sf $ns2 10.0.3.2 20
@@ -3648,8 +3648,8 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns2 1 1
- speed=5 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { speed=5 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns1
userspace_pm_add_addr $ns1 10.0.2.1 10
@@ -3679,8 +3679,8 @@ endpoint_tests()
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- speed=slow \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { speed=slow \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns1
@@ -3706,8 +3706,8 @@ endpoint_tests()
pm_nl_set_limits $ns2 0 3
pm_nl_add_endpoint $ns2 10.0.1.2 id 1 dev ns2eth1 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
- test_linkfail=4 speed=5 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { test_linkfail=4 speed=5 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns2
@@ -3783,8 +3783,8 @@ endpoint_tests()
# broadcast IP: no packet for this address will be received on ns1
pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal
pm_nl_add_endpoint $ns1 10.0.1.1 id 42 flags signal
- test_linkfail=4 speed=5 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { test_linkfail=4 speed=5 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_mpj $ns2
@@ -3856,8 +3856,8 @@ endpoint_tests()
# broadcast IP: no packet for this address will be received on ns1
pm_nl_add_endpoint $ns1 224.0.0.1 id 2 flags signal
pm_nl_add_endpoint $ns2 10.0.3.2 id 3 flags subflow
- test_linkfail=4 speed=20 \
- run_tests $ns1 $ns2 10.0.1.1 &
+ { test_linkfail=4 speed=20 \
+ run_tests $ns1 $ns2 10.0.1.1 & } 2>/dev/null
local tests_pid=$!
wait_attempt_fail $ns2
--
2.45.2
Powered by blists - more mailing lists