linux-kernel - [PATCH 08/14] iommu/vt-d: Fix potential lockup if qi_submit

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240902022724.67059-9-baolu.lu@linux.intel.com>
Date: Mon,  2 Sep 2024 10:27:18 +0800
From: Lu Baolu <baolu.lu@...ux.intel.com>
To: Joerg Roedel <joro@...tes.org>,
	Will Deacon <will@...nel.org>
Cc: Tina Zhang <tina.zhang@...el.com>,
	Sanjay K Kumar <sanjay.k.kumar@...el.com>,
	iommu@...ts.linux.dev,
	linux-kernel@...r.kernel.org
Subject: [PATCH 08/14] iommu/vt-d: Fix potential lockup if qi_submit_sync called with 0 count

From: Sanjay K Kumar <sanjay.k.kumar@...el.com>

If qi_submit_sync() is invoked with 0 invalidation descriptors (for
instance, for DMA draining purposes), we can run into a bug where a
submitting thread fails to detect the completion of invalidation_wait.
Subsequently, this led to a soft lockup. Currently, there is no impact
by this bug on the existing users because no callers are submitting
invalidations with 0 descriptors. This fix will enable future users
(such as DMA drain) calling qi_submit_sync() with 0 count.

Suppose thread T1 invokes qi_submit_sync() with non-zero descriptors, while
concurrently, thread T2 calls qi_submit_sync() with zero descriptors. Both
threads then enter a while loop, waiting for their respective descriptors
to complete. T1 detects its completion (i.e., T1's invalidation_wait status
changes to QI_DONE by HW) and proceeds to call reclaim_free_desc() to
reclaim all descriptors, potentially including adjacent ones of other
threads that are also marked as QI_DONE.

During this time, while T2 is waiting to acquire the qi->q_lock, the IOMMU
hardware may complete the invalidation for T2, setting its status to
QI_DONE. However, if T1's execution of reclaim_free_desc() frees T2's
invalidation_wait descriptor and changes its status to QI_FREE, T2 will
not observe the QI_DONE status for its invalidation_wait and will
indefinitely remain stuck.

This soft lockup does not occur when only non-zero descriptors are
submitted.In such cases, invalidation descriptors are interspersed among
wait descriptors with the status QI_IN_USE, acting as barriers. These
barriers prevent the reclaim code from mistakenly freeing descriptors
belonging to other submitters.

Considered the following example timeline:
	T1			T2
========================================
	ID1
	WD1
	while(WD1!=QI_DONE)
	unlock
				lock
	WD1=QI_DONE*		WD2
				while(WD2!=QI_DONE)
				unlock
	lock
	WD1==QI_DONE?
	ID1=QI_DONE		WD2=DONE*
	reclaim()
	ID1=FREE
	WD1=FREE
	WD2=FREE
	unlock
				soft lockup! T2 never sees QI_DONE in WD2

Where:
ID = invalidation descriptor
WD = wait descriptor
* Written by hardware

The root of the problem is that the descriptor status QI_DONE flag is used
for two conflicting purposes:
1. signal a descriptor is ready for reclaim (to be freed)
2. signal by the hardware that a wait descriptor is complete

The solution (in this patch) is state separation by using QI_FREE flag
for #1.

Once a thread's invalidation descriptors are complete, their status would
be set to QI_FREE. The reclaim_free_desc() function would then only
free descriptors marked as QI_FREE instead of those marked as
QI_DONE. This change ensures that T2 (from the previous example) will
correctly observe the completion of its invalidation_wait (marked as
QI_DONE).

Signed-off-by: Sanjay K Kumar <sanjay.k.kumar@...el.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@...el.com>
Link: https://lore.kernel.org/r/20240728210059.1964602-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
---
 drivers/iommu/intel/dmar.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 1c8d3141cb55..01e157d89a16 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1204,9 +1204,7 @@ static void free_iommu(struct intel_iommu *iommu)
  */
 static inline void reclaim_free_desc(struct q_inval *qi)
 {
-	while (qi->desc_status[qi->free_tail] == QI_DONE ||
-	       qi->desc_status[qi->free_tail] == QI_ABORT) {
-		qi->desc_status[qi->free_tail] = QI_FREE;
+	while (qi->desc_status[qi->free_tail] == QI_FREE && qi->free_tail != qi->free_head) {
 		qi->free_tail = (qi->free_tail + 1) % QI_LENGTH;
 		qi->free_cnt++;
 	}
@@ -1463,8 +1461,16 @@ int qi_submit_sync(struct intel_iommu *iommu, struct qi_desc *desc,
 		raw_spin_lock(&qi->q_lock);
 	}

-	for (i = 0; i < count; i++)
-		qi->desc_status[(index + i) % QI_LENGTH] = QI_DONE;
+	/*
+	 * The reclaim code can free descriptors from multiple submissions
+	 * starting from the tail of the queue. When count == 0, the
+	 * status of the standalone wait descriptor at the tail of the queue
+	 * must be set to QI_FREE to allow the reclaim code to proceed.
+	 * It is also possible that descriptors from one of the previous
+	 * submissions has to be reclaimed by a subsequent submission.
+	 */
+	for (i = 0; i <= count; i++)
+		qi->desc_status[(index + i) % QI_LENGTH] = QI_FREE;

 	reclaim_free_desc(qi);
 	raw_spin_unlock_irqrestore(&qi->q_lock, flags);
-- 
2.34.1