[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240902-b4-upstream-j742s2-v6-5-6a7aa2736797@ti.com>
Date: Mon, 2 Sep 2024 17:56:53 +0530
From: Manorit Chawdhry <m-chawdhry@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero
Kristo <kristo@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof
Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Udit Kumar <u-kumar1@...com>,
Neha Malcom
Francis <n-francis@...com>,
Aniket Limaye <a-limaye@...com>, Beleswar Padhi
<b-padhi@...com>,
Siddharth Vadapalli <s-vadapalli@...com>,
Manorit Chawdhry
<m-chawdhry@...com>
Subject: [PATCH v6 5/5] arm64: dts: ti: Add support for J742S2 EVM board
J742S2 EVM board is designed for TI J742S2 SoC. It supports the following
interfaces:
* 16 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 Input Audio Jack, x1 Output Audio Jack
* x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
* x1 4L PCIe connector
* x1 UHS-1 capable micro-SD card slot
* 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
UFS flash.
* x6 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* x1 GESI expander, x2 Display connector
* x1 15-pin CSI header
* x6 MCAN instances
Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide)
Link: https://www.ti.com/lit/zip/SPAC001 (Schematics)
Reviewed-by: Beleswar Padhi <b-padhi@...com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@...com>
---
Notes:
v6: No change
arch/arm64/boot/dts/ti/Makefile | 4 ++++
arch/arm64/boot/dts/ti/k3-j742s2-evm.dts | 26 ++++++++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index bcd392c3206e..5ed463cc06d5 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -126,6 +126,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
+# Boards with J742S2 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
+
# Build time test only, enabled by CONFIG_OF_ALL_DTBS
k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-ov5640.dtbo
@@ -247,3 +250,4 @@ DTC_FLAGS_k3-j721e-common-proc-board += -@
DTC_FLAGS_k3-j721e-sk += -@
DTC_FLAGS_k3-j721s2-common-proc-board += -@
DTC_FLAGS_k3-j784s4-evm += -@
+DTC_FLAGS_k3-j742s2-evm += -@
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts b/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts
new file mode 100644
index 000000000000..fcb7f05d7faf
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * EVM Board Schematics: https://www.ti.com/lit/zip/SPAC001
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j742s2.dtsi"
+#include "k3-j784s4-j742s2-evm-common.dtsi"
+
+/ {
+ model = "Texas Instruments J742S2 EVM";
+ compatible = "ti,j742s2-evm", "ti,j742s2";
+
+ memory@...00000 {
+ /* 16G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000003 0x80000000>;
+ device_type = "memory";
+ bootph-all;
+ };
+};
--
2.46.0
Powered by blists - more mailing lists