[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240903142506.3444628-8-heikki.krogerus@linux.intel.com>
Date: Tue, 3 Sep 2024 17:25:06 +0300
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Andi Shyti <andi.shyti@...nel.org>,
Jarkko Nikula <jarkko.nikula@...ux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Jan Dabros <jsd@...ihalf.com>,
linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 7/7] i2c: designware: Group all DesignWare drivers under a single option
There are quite a few drivers and options for the DesignWare
I2C adapter in the Kconfig. Grouping all of them under the
I2C_DESIGNWARE_CORE. That makes the menuconfig a bit more
easier to understand.
Signed-off-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
---
drivers/i2c/busses/Kconfig | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a22f9125322a..027724358d28 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -559,28 +559,33 @@ config I2C_DAVINCI
For details please see http://www.ti.com/davinci
config I2C_DESIGNWARE_CORE
- tristate
+ tristate "Synopsys DesignWare I2C adapter"
select REGMAP
+ help
+ This option enables support for the Synopsys DesignWare I2C adapter.
+ This driver includes support for the I2C host on the Synopsys
+ Designware I2C adapter.
+
+ To compile the driver as a module, choose M here: the module will be
+ called i2c-designware-core.
+
+if I2C_DESIGNWARE_CORE
config I2C_DESIGNWARE_SLAVE
bool "Synopsys DesignWare Slave"
- depends on I2C_DESIGNWARE_CORE
select I2C_SLAVE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C slave adapter.
- This is not a standalone module, this module compiles together with
- i2c-designware-core.
-
config I2C_DESIGNWARE_PLATFORM
- tristate "Synopsys DesignWare Platform"
+ tristate "Synopsys DesignWare Platform driver"
depends on (ACPI && COMMON_CLK) || !ACPI
- select I2C_DESIGNWARE_CORE
select MFD_SYSCON if MIPS_BAIKAL_T1
+ default I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
- Synopsys DesignWare I2C adapter.
+ Synopsys DesignWare I2C adapters on the platform bus.
This driver can also be built as a module. If so, the module
will be called i2c-designware-platform.
@@ -613,17 +618,19 @@ config I2C_DESIGNWARE_BAYTRAIL
a BayTrail system using the AXP288.
config I2C_DESIGNWARE_PCI
- tristate "Synopsys DesignWare PCI"
+ tristate "Synopsys DesignWare PCI driver"
depends on PCI
- select I2C_DESIGNWARE_CORE
select I2C_CCGX_UCSI
help
If you say yes to this option, support will be included for the
- Synopsys DesignWare I2C adapter. Only master mode is supported.
+ Synopsys DesignWare I2C adapters on the PCI bus. Only master mode is
+ supported.
This driver can also be built as a module. If so, the module
will be called i2c-designware-pci.
+endif
+
config I2C_DIGICOLOR
tristate "Conexant Digicolor I2C driver"
depends on ARCH_DIGICOLOR || COMPILE_TEST
--
2.45.2
Powered by blists - more mailing lists