[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CABdmKX2KzswmiDY4oWw69_rPWs8d_Cqp7OXouSeMQaYX1SDSmw@mail.gmail.com>
Date: Tue, 3 Sep 2024 10:50:03 -0700
From: "T.J. Mercier" <tjmercier@...gle.com>
To: Jens Wiklander <jens.wiklander@...aro.org>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-media@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linaro-mm-sig@...ts.linaro.org, op-tee@...ts.trustedfirmware.org,
linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org,
Olivier Masse <olivier.masse@....com>, Thierry Reding <thierry.reding@...il.com>,
Yong Wu <yong.wu@...iatek.com>, Sumit Semwal <sumit.semwal@...aro.org>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>, Brian Starkey <Brian.Starkey@....com>,
John Stultz <jstultz@...gle.com>, Christian König <christian.koenig@....com>,
Sumit Garg <sumit.garg@...aro.org>, Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Subject: Re: [RFC PATCH 4/4] dma-buf: heaps: add Linaro restricted dmabuf heap support
On Fri, Aug 30, 2024 at 12:04 AM Jens Wiklander
<jens.wiklander@...aro.org> wrote:
>
> Add a Linaro restricted heap using the linaro,restricted-heap bindings
> implemented based on the generic restricted heap.
>
> The bindings defines a range of physical restricted memory. The heap
> manages this address range using genalloc. The allocated dma-buf file
> descriptor can later be registered with the TEE subsystem for later use
> via Trusted Applications in the secure world.
>
> Co-developed-by: Olivier Masse <olivier.masse@....com>
> Signed-off-by: Olivier Masse <olivier.masse@....com>
> Signed-off-by: Jens Wiklander <jens.wiklander@...aro.org>
> ---
> drivers/dma-buf/heaps/Kconfig | 10 ++
> drivers/dma-buf/heaps/Makefile | 1 +
> .../dma-buf/heaps/restricted_heap_linaro.c | 165 ++++++++++++++++++
> 3 files changed, 176 insertions(+)
> create mode 100644 drivers/dma-buf/heaps/restricted_heap_linaro.c
>
> diff --git a/drivers/dma-buf/heaps/Kconfig b/drivers/dma-buf/heaps/Kconfig
> index 58903bc62ac8..82e2c5d09242 100644
> --- a/drivers/dma-buf/heaps/Kconfig
> +++ b/drivers/dma-buf/heaps/Kconfig
> @@ -28,3 +28,13 @@ config DMABUF_HEAPS_RESTRICTED_MTK
> help
> Enable restricted dma-buf heaps for MediaTek platform. This heap is backed by
> TEE client interfaces. If in doubt, say N.
> +
> +config DMABUF_HEAPS_RESTRICTED_LINARO
> + bool "Linaro DMA-BUF Restricted Heap"
> + depends on DMABUF_HEAPS_RESTRICTED
> + help
> + Choose this option to enable the Linaro restricted dma-buf heap.
> + The restricted heap pools are defined according to the DT. Heaps
> + are allocated in the pools using gen allocater.
> + If in doubt, say N.
> +
> diff --git a/drivers/dma-buf/heaps/Makefile b/drivers/dma-buf/heaps/Makefile
> index 0028aa9d875f..66b2f67c47b5 100644
> --- a/drivers/dma-buf/heaps/Makefile
> +++ b/drivers/dma-buf/heaps/Makefile
> @@ -2,4 +2,5 @@
> obj-$(CONFIG_DMABUF_HEAPS_CMA) += cma_heap.o
> obj-$(CONFIG_DMABUF_HEAPS_RESTRICTED) += restricted_heap.o
> obj-$(CONFIG_DMABUF_HEAPS_RESTRICTED_MTK) += restricted_heap_mtk.o
> +obj-$(CONFIG_DMABUF_HEAPS_RESTRICTED_LINARO) += restricted_heap_linaro.o
> obj-$(CONFIG_DMABUF_HEAPS_SYSTEM) += system_heap.o
> diff --git a/drivers/dma-buf/heaps/restricted_heap_linaro.c b/drivers/dma-buf/heaps/restricted_heap_linaro.c
> new file mode 100644
> index 000000000000..4b08ed514023
> --- /dev/null
> +++ b/drivers/dma-buf/heaps/restricted_heap_linaro.c
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DMABUF secure heap exporter
> + *
> + * Copyright 2021 NXP.
> + * Copyright 2024 Linaro Limited.
> + */
> +
> +#define pr_fmt(fmt) "rheap_linaro: " fmt
> +
> +#include <linux/dma-buf.h>
> +#include <linux/err.h>
> +#include <linux/genalloc.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_fdt.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/scatterlist.h>
> +#include <linux/slab.h>
> +
> +#include "restricted_heap.h"
> +
> +#define MAX_HEAP_COUNT 2
Are multiple supported because of what Cyrille mentioned here about permissions?
https://lore.kernel.org/lkml/DBBPR04MB7514E006455AEA407041E4F788709@DBBPR04MB7514.eurprd04.prod.outlook.com/
So this is just some arbitrary limit? I'd prefer to have some sort of
documentation about this.
> +#define HEAP_NAME_LEN 32
> +
> +struct resmem_restricted {
> + phys_addr_t base;
> + phys_addr_t size;
> +
> + char name[HEAP_NAME_LEN];
> +
> + bool no_map;
> +};
> +
> +static struct resmem_restricted restricted_data[MAX_HEAP_COUNT] = {0};
> +static unsigned int restricted_data_count;
> +
> +static int linaro_restricted_memory_allocate(struct restricted_heap *heap,
> + struct restricted_buffer *buf)
> +{
> + struct gen_pool *pool = heap->priv_data;
> + unsigned long pa;
> + int ret;
> +
> + buf->size = ALIGN(buf->size, PAGE_SIZE);
> + pa = gen_pool_alloc(pool, buf->size);
> + if (!pa)
> + return -ENOMEM;
> +
> + ret = sg_alloc_table(&buf->sg_table, 1, GFP_KERNEL);
> + if (ret) {
> + gen_pool_free(pool, pa, buf->size);
> + return ret;
> + }
> +
> + sg_set_page(buf->sg_table.sgl, phys_to_page(pa), buf->size, 0);
> +
> + return 0;
> +}
> +
> +static void linaro_restricted_memory_free(struct restricted_heap *heap,
> + struct restricted_buffer *buf)
> +{
> + struct gen_pool *pool = heap->priv_data;
> + struct scatterlist *sg;
> + unsigned int i;
> +
> + for_each_sg(buf->sg_table.sgl, sg, buf->sg_table.nents, i)
> + gen_pool_free(pool, page_to_phys(sg_page(sg)), sg->length);
> + sg_free_table(&buf->sg_table);
> +}
> +
> +static const struct restricted_heap_ops linaro_restricted_heap_ops = {
> + .alloc = linaro_restricted_memory_allocate,
> + .free = linaro_restricted_memory_free,
> +};
> +
> +static int add_heap(struct resmem_restricted *mem)
> +{
> + struct restricted_heap *heap;
> + struct gen_pool *pool;
> + int ret;
> +
> + if (mem->base == 0 || mem->size == 0) {
> + pr_err("restricted_data base or size is not correct\n");
> + return -EINVAL;
> + }
> +
> + heap = kzalloc(sizeof(*heap), GFP_KERNEL);
> + if (!heap)
> + return -ENOMEM;
> +
> + pool = gen_pool_create(PAGE_SHIFT, -1);
> + if (!pool) {
> + ret = -ENOMEM;
> + goto err_free_heap;
> + }
> +
> + ret = gen_pool_add(pool, mem->base, mem->size, -1);
> + if (ret)
> + goto err_free_pool;
> +
> + heap->no_map = mem->no_map;
> + heap->priv_data = pool;
> + heap->name = mem->name;
> + heap->ops = &linaro_restricted_heap_ops;
> +
> + ret = restricted_heap_add(heap);
> + if (ret)
> + goto err_free_pool;
> +
> + return 0;
> +
> +err_free_pool:
> + gen_pool_destroy(pool);
> +err_free_heap:
> + kfree(heap);
> +
> + return ret;
> +}
> +
> +static int __init rmem_restricted_heap_setup(struct reserved_mem *rmem)
> +{
> + size_t len = HEAP_NAME_LEN;
> + const char *s;
> + bool no_map;
> +
> + if (WARN_ONCE(restricted_data_count >= MAX_HEAP_COUNT,
> + "Cannot handle more than %u restricted heaps\n",
> + MAX_HEAP_COUNT))
> + return -EINVAL;
> +
> + no_map = of_get_flat_dt_prop(rmem->fdt_node, "no-map", NULL);
> + s = strchr(rmem->name, '@');
> + if (s)
> + len = umin(s - rmem->name + 1, len);
> +
> + restricted_data[restricted_data_count].base = rmem->base;
> + restricted_data[restricted_data_count].size = rmem->size;
> + restricted_data[restricted_data_count].no_map = no_map;
> + strscpy(restricted_data[restricted_data_count].name, rmem->name, len);
> +
> + restricted_data_count++;
> + return 0;
> +}
> +
> +RESERVEDMEM_OF_DECLARE(linaro_restricted_heap, "linaro,restricted-heap",
> + rmem_restricted_heap_setup);
> +
> +static int linaro_restricted_heap_init(void)
> +{
> + unsigned int i;
> + int ret;
> +
> + for (i = 0; i < restricted_data_count; i++) {
> + ret = add_heap(&restricted_data[i]);
> + if (ret)
> + return ret;
> + }
> + return 0;
> +}
> +
> +module_init(linaro_restricted_heap_init);
> +MODULE_DESCRIPTION("Linaro Restricted Heap Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.34.1
>
Powered by blists - more mailing lists