[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240903192718.1108456-5-sashal@kernel.org>
Date: Tue, 3 Sep 2024 15:26:49 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
stable@...r.kernel.org
Cc: Thomas Blocher <thomas.blocher@...dev.de>,
Linus Walleij <linus.walleij@...aro.org>,
Sasha Levin <sashal@...nel.org>,
ludovic.desroches@...rochip.com,
nicolas.ferre@...rochip.com,
alexandre.belloni@...tlin.com,
claudiu.beznea@...on.dev,
linux-arm-kernel@...ts.infradead.org,
linux-gpio@...r.kernel.org
Subject: [PATCH AUTOSEL 5.15 05/12] pinctrl: at91: make it work with current gpiolib
From: Thomas Blocher <thomas.blocher@...dev.de>
[ Upstream commit 752f387faaae0ae2e84d3f496922524785e77d60 ]
pinctrl-at91 currently does not support the gpio-groups devicetree
property and has no pin-range.
Because of this at91 gpios stopped working since patch
commit 2ab73c6d8323fa1e ("gpio: Support GPIO controllers without pin-ranges")
This was discussed in the patches
commit fc328a7d1fcce263 ("gpio: Revert regression in sysfs-gpio (gpiolib.c)")
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
As a workaround manually set pin-range via gpiochip_add_pin_range() until
a) pinctrl-at91 is reworked to support devicetree gpio-groups
b) another solution as mentioned in
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
is found
Signed-off-by: Thomas Blocher <thomas.blocher@...dev.de>
Link: https://lore.kernel.org/5b992862-355d-f0de-cd3d-ff99e67a4ff1@ek-dev.de
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/pinctrl/pinctrl-at91.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 3b0341c730ee0..9c92838428b8f 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1403,8 +1403,11 @@ static int at91_pinctrl_probe(struct platform_device *pdev)
/* We will handle a range of GPIO pins */
for (i = 0; i < gpio_banks; i++)
- if (gpio_chips[i])
+ if (gpio_chips[i]) {
pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
+ gpiochip_add_pin_range(&gpio_chips[i]->chip, dev_name(info->pctl->dev), 0,
+ gpio_chips[i]->range.pin_base, gpio_chips[i]->range.npins);
+ }
dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n");
--
2.43.0
Powered by blists - more mailing lists