[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CABymUCOsF5gL_i-uEyBBpgV_9qO_T3hNQ6vSX-dMGRsdFfgPXg@mail.gmail.com>
Date: Tue, 3 Sep 2024 15:34:03 +0800
From: Jun Nie <jun.nie@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Rob Clark <robdclark@...il.com>, Abhinav Kumar <quic_abhinavk@...cinc.com>,
Sean Paul <sean@...rly.run>, Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>, linux-arm-msm@...r.kernel.org,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 03/21] drm/msm/dsi: pass the right width to dsc
Dmitry Baryshkov <dmitry.baryshkov@...aro.org> 于2024年8月29日周四 18:57写道:
>
> On Thu, 29 Aug 2024 at 13:19, Jun Nie <jun.nie@...aro.org> wrote:
> >
> > Data width for dsc engine is aligned with pipe, not with whole screen
> > width. Because the width may be halved in DSI bonded case.
>
> Can't really parse this.
Please forgive me for my bad English. Is below words better?
Data width for DSC timing is aligned with the width that goes to a DSI
interface, not with whole screen width. For bonded-DSI case, the
width for DSC timing is half width of whole screen.
>
> >
> > The dsc width is not related to the timing with back front porch in
> > later stage, so update dsc timing earlier.
> >
> > Signed-off-by: Jun Nie <jun.nie@...aro.org>
> > ---
> > drivers/gpu/drm/msm/dsi/dsi_host.c | 13 ++++++-------
> > 1 file changed, 6 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > index 7a4d9c071be5a..5abade8f26b88 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > @@ -953,7 +953,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > return;
> > }
> >
> > - dsc->pic_width = mode->hdisplay;
> > + dsc->pic_width = hdisplay;
> > dsc->pic_height = mode->vdisplay;
> > DBG("Mode %dx%d\n", dsc->pic_width, dsc->pic_height);
>
> Two separate commits
OK. Will split it.
>
> >
> > @@ -964,6 +964,11 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > if (ret)
> > return;
> >
> > + if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO)
> > + dsi_update_dsc_timing(msm_host, false, hdisplay);
> > + else
> > + dsi_update_dsc_timing(msm_host, true, hdisplay);
> > +
> > /*
> > * DPU sends 3 bytes per pclk cycle to DSI. If widebus is
> > * enabled, bus width is extended to 6 bytes.
> > @@ -990,9 +995,6 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > }
> >
> > if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> > - if (msm_host->dsc)
> > - dsi_update_dsc_timing(msm_host, false, mode->hdisplay);
> > -
> > dsi_write(msm_host, REG_DSI_ACTIVE_H,
> > DSI_ACTIVE_H_START(ha_start) |
> > DSI_ACTIVE_H_END(ha_end));
> > @@ -1011,9 +1013,6 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> > DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
> > DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
> > } else { /* command mode */
> > - if (msm_host->dsc)
> > - dsi_update_dsc_timing(msm_host, true, mode->hdisplay);
> > -
> > /* image data and 1 byte write_memory_start cmd */
> > if (!msm_host->dsc)
> > wc = hdisplay * mipi_dsi_pixel_format_to_bpp(msm_host->format) / 8 + 1;
> >
> > --
> > 2.34.1
> >
>
>
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists