Message-ID: <2024090324-phonics-angler-64c2@gregkh>
Date: Tue, 3 Sep 2024 09:58:49 +0200
From: Greg KH <gregkh@...uxfoundation.org>
To: "Pandey, Radhey Shyam" <radhey.shyam.pandey@....com>
Cc: "mka@...omium.org" <mka@...omium.org>,
	"sakari.ailus@...ux.intel.com" <sakari.ailus@...ux.intel.com>,
	"wentong.wu@...el.com" <wentong.wu@...el.com>,
	"javier.carrasco@...fvision.net" <javier.carrasco@...fvision.net>,
	"stefan.eichenberger@...adex.com" <stefan.eichenberger@...adex.com>,
	"francesco.dolcini@...adex.com" <francesco.dolcini@...adex.com>,
	"jbrunet@...libre.com" <jbrunet@...libre.com>,
	"macpaul.lin@...iatek.com" <macpaul.lin@...iatek.com>,
	"frieder.schrempf@...tron.de" <frieder.schrempf@...tron.de>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"git (AMD-Xilinx)" <git@....com>
Subject: Re: [PATCH v4 2/2] usb: misc: onboard_usb_dev: add Microchip usb5744
 SMBus programming support

On Tue, Sep 03, 2024 at 07:19:09AM +0000, Pandey, Radhey Shyam wrote:
> > -----Original Message-----
> > From: Greg KH <gregkh@...uxfoundation.org>
> > Sent: Tuesday, September 3, 2024 12:10 PM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@....com>
> > Cc: mka@...omium.org; sakari.ailus@...ux.intel.com;
> > wentong.wu@...el.com; javier.carrasco@...fvision.net;
> > stefan.eichenberger@...adex.com; francesco.dolcini@...adex.com;
> > jbrunet@...libre.com; macpaul.lin@...iatek.com;
> > frieder.schrempf@...tron.de; linux-usb@...r.kernel.org; linux-
> > kernel@...r.kernel.org; git (AMD-Xilinx) <git@....com>
> > Subject: Re: [PATCH v4 2/2] usb: misc: onboard_usb_dev: add Microchip
> > usb5744 SMBus programming support
> > 
> > On Sun, Sep 01, 2024 at 05:38:39PM +0530, Radhey Shyam Pandey wrote:
> > > usb5744 supports SMBus Configuration and it may be configured via the
> > > SMBus slave interface during the hub start-up configuration stage.
> > >
> > > To program it driver uses i2c-bus phandle (added in commit '02be19e914b8
> > > dt-bindings: usb: Add support for Microchip usb5744 hub controller') to
> > > get i2c client device and then based on usb5744 compatible check calls
> > > usb5744 i2c default initialization sequence.
> > >
> > > Apart from the USB command attach, prevent the hub from suspend.
> > > when the USB Attach with SMBus (0xAA56) command is issued to the hub,
> > > the hub is getting enumerated and then it puts in a suspend mode.
> > > This causes the hub to NAK any SMBus access made by the SMBus Master
> > > during this period and not able to see the hub's slave address while
> > > running the "i2c probe" command.
> > >
> > > Prevent the MCU from putting the HUB in suspend mode through register
> > > write. The BYPASS_UDC_SUSPEND bit (Bit 3) of the RuntimeFlags2
> > > register at address 0x411D controls this aspect of the hub. The
> > > BYPASS_UDC_SUSPEND bit in register 0x411Dh must be set to ensure that
> > the
> > > MCU is always enabled and ready to respond to SMBus runtime
> > commands.
> > > This register needs to be written before the USB attach command is issued.
> > >
> > > The byte sequence is as follows:
> > > Slave addr: 0x2d           00 00 05 00 01 41 1D 08
> > > Slave addr: 0x2d           99 37 00
> > > Slave addr: 0x2d           AA 56 00
> > >
> > > Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
> > > ---
> > > Changes for v4:
> > > - Fix error: implicit declaration of function 'i2c_smbus_*' APIs by
> > >   introducing a dependency on I2C_CONFIG. This error is reported
> > >   by kernel test on v3 series and usb:usb-testing 20/25 branch.
> > >   https://lore.kernel.org/all/2024082503-uncoated-chaperone-
> > 7f70@...gkh
> > >
> > > Changes for v3:
> > > - Add comment for UDC suspend sequence.
> > > - Drop USB5744_CREG_MEM_NBYTES and USB5744_CREG_NBYTES and
> > replace
> > >   it with literal + comment.
> > > - Move microchip defines to source file.
> > >
> > > Changes for v2:
> > > - Move power on reset delay to separate patch.
> > > - Switch to compatible based check for calling usb5755
> > >   onboard_dev_5744_i2c_init(). This is done to make
> > >   onboard_dev_5744_i2c_init() as static.
> > > - Fix subsystem "usb: misc: onboard_usb_dev:..."
> > > - Use #define for different register bits instead of magic values.
> > > - Use err_power_off label name.
> > > - Modified commit description to be in sync with v2 changes.
> > > ---
> > >  drivers/usb/misc/Kconfig           |  2 +-
> > >  drivers/usb/misc/onboard_usb_dev.c | 73
> > ++++++++++++++++++++++++++++++
> > >  2 files changed, 74 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
> > > index 50b86d531701..cb5e47d439ab 100644
> > > --- a/drivers/usb/misc/Kconfig
> > > +++ b/drivers/usb/misc/Kconfig
> > > @@ -318,7 +318,7 @@ config BRCM_USB_PINMAP
> > >
> > >  config USB_ONBOARD_DEV
> > >  	tristate "Onboard USB device support"
> > > -	depends on OF
> > > +	depends on OF && I2C
> > 
> > This feels wrong.
> > 
> > While a single device that this driver supports might need i2c, not all
> > of the devices do, so you have the potential to drag in a bunch of code
> > here for devices that do not have/need i2c at all, right?
> > 
> > Any way to "split this out" into a smaller chunk?  Or better yet, just
> > detect at runtime if you need/want to call those i2c functions (and they
> > should have no-ops for when i2c is not enabled, right?)
> 
> In onboard driver I am calling onboard_dev_5744_i2c_init() by
> detecting at runtime if "i2c-bus" phandle is present. But the 
> problem is i2c_smbus_* APIs are declared and defined only for 
> #if IS_ENABLED(CONFIG_I2C).
> 
> Do you think we should implement no-ops for I2C smbus APIs
> (in linux/i2c.h)? OR a simpler alternative would be to
> add #if IS_ENABLED(CONFIG_I2C) check in the onboard_*_i2c_init()
> and return error code if CONFIG_I2C is not defined ? 
> Did a grep on #if IS_ENABLED(CONFIG_I2C) and find couple of 
> drivers using this approach.

Yes, try doing this with simpler way first and see what that looks like.

thanks,

greg k-h

Powered by blists - more mailing lists