lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240904023310.163371-5-aford173@gmail.com>
Date: Tue,  3 Sep 2024 21:32:43 -0500
From: Adam Ford <aford173@...il.com>
To: linux-phy@...ts.infradead.org
Cc: dominique.martinet@...ark-techno.com,
	linux-imx@....com,
	festevam@...il.com,
	frieder.schrempf@...tron.de,
	aford@...conembedded.com,
	Sandor.yu@....com,
	Adam Ford <aford173@...il.com>,
	Vinod Koul <vkoul@...nel.org>,
	Kishon Vijay Abraham I <kishon@...nel.org>,
	Marco Felsch <m.felsch@...gutronix.de>,
	Uwe Kleine-König <u.kleine-koenig@...gutronix.de>,
	Lucas Stach <l.stach@...gutronix.de>,
	linux-kernel@...r.kernel.org
Subject: [PATCH V5 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider

Currently, if the clock values cannot be set to the exact rate,
the round_rate and set_rate functions use the closest value found in
the look-up-table.  In preparation of removing values from the LUT
that can be calculated evenly with the integer calculator, it's
necessary to ensure to check both the look-up-table and the integer
divider clock values to get the closest values to the requested
value.  It does this by measuring the difference between the
requested clock value and the closest value in both integer divider
calucator and the fractional clock look-up-table.

Which ever has the smallest difference between them is returned as
the cloesest rate.

Signed-off-by: Adam Ford <aford173@...il.com>
Signed-off-by: Dominique Martinet <dominique.martinet@...ark-techno.com>
---
V5:  No Change
V4:  New to series
---
 drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 40 +++++++++++++++-----
 1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
index 8f2c0082aa12..56b08e684179 100644
--- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -550,7 +550,7 @@ static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
 static long phy_clk_round_rate(struct clk_hw *hw,
 			       unsigned long rate, unsigned long *parent_rate)
 {
-	u32 int_div_clk;
+	u32 int_div_clk, delta_int, delta_frac;
 	int i;
 	u16 m;
 	u8 p, s;
@@ -563,6 +563,7 @@ static long phy_clk_round_rate(struct clk_hw *hw,
 	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
 		if (phy_pll_cfg[i].pixclk <= rate)
 			break;
+
 	/* If the rate is an exact match, return it now */
 	if (rate == phy_pll_cfg[i].pixclk)
 		return phy_pll_cfg[i].pixclk;
@@ -579,15 +580,21 @@ static long phy_clk_round_rate(struct clk_hw *hw,
 	if (int_div_clk == rate)
 		return int_div_clk;
 
-	/* Fall back to the closest value in the LUT */
-	return phy_pll_cfg[i].pixclk;
+	/* Calculate the differences and use the closest one */
+	delta_frac = (rate - phy_pll_cfg[i].pixclk);
+	delta_int = (rate - int_div_clk);
+
+	if (delta_int < delta_frac)
+		return int_div_clk;
+	else
+		return phy_pll_cfg[i].pixclk;
 }
 
 static int phy_clk_set_rate(struct clk_hw *hw,
 			    unsigned long rate, unsigned long parent_rate)
 {
 	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
-	u32 int_div_clk;
+	u32 int_div_clk, delta_int, delta_frac;
 	int i;
 	u16 m;
 	u8 p, s;
@@ -602,19 +609,34 @@ static int phy_clk_set_rate(struct clk_hw *hw,
 		calculated_phy_pll_cfg.pll_div_regs[2] = FIELD_PREP(REG03_PMS_S_MASK, s-1);
 		/* pll_div_regs 3-6 are fixed and pre-defined already */
 		phy->cur_cfg  = &calculated_phy_pll_cfg;
+		goto done;
 	} else {
 		/* Otherwise, search the LUT */
-		dev_dbg(phy->dev, "fsl_samsung_hdmi_phy: using fractional divider\n");
-		for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
-			if (phy_pll_cfg[i].pixclk <= rate)
+		for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--) {
+			if (phy_pll_cfg[i].pixclk == rate) {
+				dev_dbg(phy->dev, "fsl_samsung_hdmi_phy: using fractional divider\n");
+				phy->cur_cfg = &phy_pll_cfg[i];
+				goto done;
+			}
+
+			if (phy_pll_cfg[i].pixclk < rate)
 				break;
+		}
 
 		if (i < 0)
 			return -EINVAL;
-
-		phy->cur_cfg = &phy_pll_cfg[i];
 	}
 
+	/* Calculate the differences for each clock against the requested value */
+	delta_frac = (rate - phy_pll_cfg[i].pixclk);
+	delta_int = (rate - int_div_clk);
+
+	/* Use the value closest to the desired */
+	if (delta_int < delta_frac)
+		phy->cur_cfg  = &calculated_phy_pll_cfg;
+	else
+		phy->cur_cfg = &phy_pll_cfg[i];
+done:
 	return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
 }
 
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ