lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZtiAwIxrsct2s24g@pluto>
Date: Wed, 4 Sep 2024 16:46:08 +0100
From: Cristian Marussi <cristian.marussi@....com>
To: Sibi Sankar <quic_sibis@...cinc.com>
Cc: sudeep.holla@....com, cristian.marussi@....com,
	linux-kernel@...r.kernel.org, arm-scmi@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
	johan@...nel.org, konradybcio@...nel.org
Subject: Re: [PATCH V2 2/2] firmware: arm_scmi: Skip adding bad duplicates

On Wed, Sep 04, 2024 at 04:30:24PM +0100, Cristian Marussi wrote:
> On Wed, Sep 04, 2024 at 04:21:49PM +0100, Cristian Marussi wrote:
> > On Wed, Sep 04, 2024 at 08:43:24AM +0530, Sibi Sankar wrote:
> > > Ensure that the bad duplicates reported by the platform firmware doesn't
> > > get added to the opp-tables.
> > > 
> > 
> > Hi Sibi,
> > 
> > so if the idea is to make the code more robust when FW sends BAD
> > duplicates, you necessarily need to properly drop opps in opp_count too.
> > 
> > One other option would be to just loop with xa_for_each BUT opp_count is
> > used in a number of places...so first of all let's try drop count properly.
> > 
> > Can you try this patch down below, instead of your patch.
> > If it solves, I will send a patch (after testing it a bit more :D)
> 
> Hold on... I sent you a diff that does not apply probably on your tree due
> to some uncomitted local work of mine...my bad...let me resend.
> 

This one should be good...apologies

---8<---

diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 4b7f1cbb9b04..bca9c6e4a3ab 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -373,7 +373,7 @@ static int iter_perf_levels_update_state(struct scmi_iterator_state *st,
 	return 0;
 }
 
-static inline void
+static inline int
 process_response_opp(struct device *dev, struct perf_dom_info *dom,
 		     struct scmi_opp *opp, unsigned int loop_idx,
 		     const struct scmi_msg_resp_perf_describe_levels *r)
@@ -386,12 +386,16 @@ process_response_opp(struct device *dev, struct perf_dom_info *dom,
 		le16_to_cpu(r->opp[loop_idx].transition_latency_us);
 
 	ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
-	if (ret)
+	if (ret) {
 		dev_warn(dev, "Failed to add opps_by_lvl at %d for %s - ret:%d\n",
 			 opp->perf, dom->info.name, ret);
+		return ret;
+	}
+
+	return 0;
 }
 
-static inline void
+static inline int
 process_response_opp_v4(struct device *dev, struct perf_dom_info *dom,
 			struct scmi_opp *opp, unsigned int loop_idx,
 			const struct scmi_msg_resp_perf_describe_levels_v4 *r)
@@ -404,9 +408,11 @@ process_response_opp_v4(struct device *dev, struct perf_dom_info *dom,
 		le16_to_cpu(r->opp[loop_idx].transition_latency_us);
 
 	ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
-	if (ret)
+	if (ret) {
 		dev_warn(dev, "Failed to add opps_by_lvl at %d for %s - ret:%d\n",
 			 opp->perf, dom->info.name, ret);
+		return ret;
+	}
 
 	/* Note that PERF v4 reports always five 32-bit words */
 	opp->indicative_freq = le32_to_cpu(r->opp[loop_idx].indicative_freq);
@@ -415,13 +421,21 @@ process_response_opp_v4(struct device *dev, struct perf_dom_info *dom,
 
 		ret = xa_insert(&dom->opps_by_idx, opp->level_index, opp,
 				GFP_KERNEL);
-		if (ret)
+		if (ret) {
 			dev_warn(dev,
 				 "Failed to add opps_by_idx at %d for %s - ret:%d\n",
 				 opp->level_index, dom->info.name, ret);
 
+			/* Cleanup by_lvl too */
+			xa_erase(&dom->opps_by_lvl, opp->perf);
+
+			return ret;
+		}
+
 		hash_add(dom->opps_by_freq, &opp->hash, opp->indicative_freq);
 	}
+
+	return 0;
 }
 
 static int
@@ -429,16 +443,22 @@ iter_perf_levels_process_response(const struct scmi_protocol_handle *ph,
 				  const void *response,
 				  struct scmi_iterator_state *st, void *priv)
 {
+	int ret;
 	struct scmi_opp *opp;
 	struct scmi_perf_ipriv *p = priv;
 
 	opp = &p->perf_dom->opp[st->desc_index + st->loop_idx];
 	if (PROTOCOL_REV_MAJOR(p->version) <= 0x3)
-		process_response_opp(ph->dev, p->perf_dom, opp, st->loop_idx,
-				     response);
+		ret = process_response_opp(ph->dev, p->perf_dom, opp,
+					   st->loop_idx, response);
 	else
-		process_response_opp_v4(ph->dev, p->perf_dom, opp, st->loop_idx,
-					response);
+		ret = process_response_opp_v4(ph->dev, p->perf_dom, opp,
+					      st->loop_idx, response);
+
+	/* Skip BAD duplicates received from firmware */
+	if (ret)
+		return ret == -EBUSY ? 0 : ret;
+
 	p->perf_dom->opp_count++;
 
 	dev_dbg(ph->dev, "Level %d Power %d Latency %dus Ifreq %d Index %d\n",
--->8----


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ