| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240904234803.698424-5-masahiroy@kernel.org>
Date: Thu, 5 Sep 2024 08:47:40 +0900
From: Masahiro Yamada <masahiroy@...nel.org>
To: linux-kbuild@...r.kernel.org
Cc: linux-arch@...r.kernel.org,
linux-snps-arc@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Michal Simek <monstr@...str.eu>,
Rob Herring <robh@...nel.org>,
devicetree@...r.kernel.org,
linux-mips@...r.kernel.org,
linux-openrisc@...r.kernel.org,
Dinh Nguyen <dinguyen@...nel.org>,
Masahiro Yamada <masahiroy@...nel.org>
Subject: [PATCH 04/15] kbuild: add generic support for built-in boot DTBs
Some architectures embed boot DTBs in vmlinux. A potential issue for
these architectures is a race condition during parallel builds because
Kbuild descends into arch/*/boot/dts/ twice.
One build thread is initiated by the 'dtbs' target, which is a
prerequisite of the 'all' target in the top-level Makefile:
ifdef CONFIG_OF_EARLY_FLATTREE
all: dtbs
endif
For architectures that support the embedded boot dtb, arch/*/boot/dts/
is visited also during the ordinary directory traversal in order to
build obj-y objects that wrap DTBs.
Since these build threads are unaware of each other, they can run
simultaneously during parallel builds.
This commit introduces a generic build rule to scripts/Makefile.vmlinux
to support embedded boot DTBs in a race-free way. Architectures that
want to use this rule need to select CONFIG_GENERIC_BUILTIN_DTB.
After the migration, Makefiles under arch/*/boot/dts/ will be visited
only once to build only *.dtb files.
This change also aims to unify the CONFIG options used for embedded DTBs
support. Currently, different architectures use different CONFIG options
for the same purposes.
The CONFIG options are unified as follows:
- CONFIG_GENERIC_BUILTIN_DTB
This enables the generic rule for embedded boot DTBs. This will be
renamed to CONFIG_BUILTIN_DTB after all architectures migrate to the
generic rule.
- CONFIG_BUILTIN_DTB_NAME
This specifies the path to the embedded DTB.
(relative to arch/*/boot/dts/)
- CONFIG_BUILTIN_DTB_ALL
If this is enabled, all DTB files compiled under arch/*/boot/dts/ are
embedded into vmlinux. Only used by MIPS.
Signed-off-by: Masahiro Yamada <masahiroy@...nel.org>
---
Makefile | 7 ++++++-
drivers/of/Kconfig | 6 ++++++
scripts/Makefile.vmlinux | 44 ++++++++++++++++++++++++++++++++++++++++
scripts/link-vmlinux.sh | 4 ++++
4 files changed, 60 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 145112bf281a..1c765c12ab9e 100644
--- a/Makefile
+++ b/Makefile
@@ -1417,6 +1417,10 @@ ifdef CONFIG_OF_EARLY_FLATTREE
all: dtbs
endif
+ifdef CONFIG_GENERIC_BUILTIN_DTB
+vmlinux: dtbs
+endif
+
endif
PHONY += scripts_dtc
@@ -1483,7 +1487,8 @@ endif # CONFIG_MODULES
CLEAN_FILES += vmlinux.symvers modules-only.symvers \
modules.builtin modules.builtin.modinfo modules.nsdeps \
compile_commands.json rust/test \
- rust-project.json .vmlinux.objs .vmlinux.export.c
+ rust-project.json .vmlinux.objs .vmlinux.export.c \
+ .builtin-dtbs-list .builtin-dtb.S
# Directories & files removed with 'make mrproper'
MRPROPER_FILES += include/config include/generated \
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index dd726c7056bf..5142e7d7fef8 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -2,6 +2,12 @@
config DTC
bool
+config GENERIC_BUILTIN_DTB
+ bool
+
+config BUILTIN_DTB_ALL
+ bool
+
menuconfig OF
bool "Device Tree and Open Firmware support"
help
diff --git a/scripts/Makefile.vmlinux b/scripts/Makefile.vmlinux
index 5ceecbed31eb..4626b472da49 100644
--- a/scripts/Makefile.vmlinux
+++ b/scripts/Makefile.vmlinux
@@ -17,6 +17,50 @@ quiet_cmd_cc_o_c = CC $@
%.o: %.c FORCE
$(call if_changed_dep,cc_o_c)
+quiet_cmd_as_o_S = AS $@
+ cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
+
+%.o: %.S FORCE
+ $(call if_changed_dep,as_o_S)
+
+# Built-in dtb
+# ---------------------------------------------------------------------------
+
+quiet_cmd_wrap_dtbs = WRAP $@
+ cmd_wrap_dtbs = { \
+ echo '\#include <asm-generic/vmlinux.lds.h>'; \
+ echo '.section .dtb.init.rodata,"a"'; \
+ while read dtb; do \
+ symbase=__dtb_$$(basename -s .dtb "$${dtb}" | tr - _); \
+ echo '.balign STRUCT_ALIGNMENT'; \
+ echo ".global $${symbase}_begin"; \
+ echo "$${symbase}_begin:"; \
+ echo '.incbin "'$$dtb'" '; \
+ echo ".global $${symbase}_end"; \
+ echo "$${symbase}_end:"; \
+ done < $<; \
+ } > $@
+
+.builtin-dtbs.S: .builtin-dtbs-list FORCE
+ $(call if_changed,wrap_dtbs)
+
+quiet_cmd_gen_dtbs_list = GEN $@
+ cmd_gen_dtbs_list = \
+ $(if $(CONFIG_BUILTIN_DTB_NAME), echo "arch/$(SRCARCH)/boot/dts/$(CONFIG_BUILTIN_DTB_NAME).dtb",:) > $@
+
+.builtin-dtbs-list: arch/$(SRCARCH)/boot/dts/dtbs-list FORCE
+ $(call if_changed,$(if $(CONFIG_BUILTIN_DTB_ALL),copy,gen_dtbs_list))
+
+targets += .builtin-dtbs-list
+
+ifdef CONFIG_GENERIC_BUILTIN_DTB
+targets += .builtin-dtbs.S .builtin-dtbs.o
+vmlinux: .builtin-dtbs.o
+endif
+
+# vmlinux
+# ---------------------------------------------------------------------------
+
ifdef CONFIG_MODULES
targets += .vmlinux.export.o
vmlinux: .vmlinux.export.o
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index c27b4e969f20..bd196944e350 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -68,6 +68,10 @@ vmlinux_link()
libs="${KBUILD_VMLINUX_LIBS}"
fi
+ if is_enabled CONFIG_GENERIC_BUILTIN_DTB; then
+ objs="${objs} .builtin-dtbs.o"
+ fi
+
if is_enabled CONFIG_MODULES; then
objs="${objs} .vmlinux.export.o"
fi
--
2.43.0
Powered by blists - more mailing lists