[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240904062749.466124-4-vtpieter@gmail.com>
Date: Wed, 4 Sep 2024 08:27:42 +0200
From: vtpieter@...il.com
To: Woojung Huh <woojung.huh@...rochip.com>,
UNGLinuxDriver@...rochip.com,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>,
Arun.Ramadoss@...rochip.com
Cc: netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Tristram.Ha@...rochip.com,
o.rempel@...gutronix.de,
Pieter Van Trappen <pieter.van.trappen@...n.ch>,
Arun Ramadoss <arun.ramadoss@...rochip.com>
Subject: [PATCH net-next v4 3/3] net: dsa: microchip: replace unclear KSZ8830 strings
From: Pieter Van Trappen <pieter.van.trappen@...n.ch>
Replace ksz8830 with ksz88x3 for CHIP_ID definition and other
strings. This due to KSZ8830 not being an actual switch but the Chip
ID shared among KSZ8863/8873 switches, impossible to differentiate
from their Chip ID or Revision ID registers.
Now all KSZ*_CHIP_ID macros refer to actual, existing switches which
removes confusion.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@...n.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
---
drivers/net/dsa/microchip/ksz8.c | 2 +-
drivers/net/dsa/microchip/ksz8863_smi.c | 4 +-
drivers/net/dsa/microchip/ksz_common.c | 48 ++++++++++-----------
drivers/net/dsa/microchip/ksz_common.h | 4 +-
drivers/net/dsa/microchip/ksz_spi.c | 6 +--
include/linux/platform_data/microchip-ksz.h | 2 +-
6 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c
index 7af3c0853505..da7110d67558 100644
--- a/drivers/net/dsa/microchip/ksz8.c
+++ b/drivers/net/dsa/microchip/ksz8.c
@@ -194,7 +194,7 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
case KSZ8794_CHIP_ID:
case KSZ8765_CHIP_ID:
return ksz8795_change_mtu(dev, frame_size);
- case KSZ8830_CHIP_ID:
+ case KSZ88X3_CHIP_ID:
case KSZ8864_CHIP_ID:
case KSZ8895_CHIP_ID:
return ksz8863_change_mtu(dev, frame_size);
diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
index 5711a59e2ac9..a8bfcd917bf7 100644
--- a/drivers/net/dsa/microchip/ksz8863_smi.c
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -199,11 +199,11 @@ static void ksz8863_smi_shutdown(struct mdio_device *mdiodev)
static const struct of_device_id ksz8863_dt_ids[] = {
{
.compatible = "microchip,ksz8863",
- .data = &ksz_switch_chips[KSZ8830]
+ .data = &ksz_switch_chips[KSZ88X3]
},
{
.compatible = "microchip,ksz8873",
- .data = &ksz_switch_chips[KSZ8830]
+ .data = &ksz_switch_chips[KSZ88X3]
},
{ },
};
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 6609bf271ad0..972ccb84bd53 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -246,16 +246,16 @@ static const struct ksz_drive_strength ksz9477_drive_strengths[] = {
{ SW_DRIVE_STRENGTH_28MA, 28000 },
};
-/* ksz8830_drive_strengths - Drive strength mapping for KSZ8830, KSZ8873, ..
+/* ksz88x3_drive_strengths - Drive strength mapping for KSZ8863, KSZ8873, ..
* variants.
* This values are documented in KSZ8873 and KSZ8863 datasheets.
*/
-static const struct ksz_drive_strength ksz8830_drive_strengths[] = {
+static const struct ksz_drive_strength ksz88x3_drive_strengths[] = {
{ 0, 8000 },
{ KSZ8873_DRIVE_STRENGTH_16MA, 16000 },
};
-static void ksz8830_phylink_mac_config(struct phylink_config *config,
+static void ksz88x3_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state);
static void ksz_phylink_mac_config(struct phylink_config *config,
@@ -265,8 +265,8 @@ static void ksz_phylink_mac_link_down(struct phylink_config *config,
unsigned int mode,
phy_interface_t interface);
-static const struct phylink_mac_ops ksz8830_phylink_mac_ops = {
- .mac_config = ksz8830_phylink_mac_config,
+static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = {
+ .mac_config = ksz88x3_phylink_mac_config,
.mac_link_down = ksz_phylink_mac_link_down,
.mac_link_up = ksz8_phylink_mac_link_up,
};
@@ -1442,8 +1442,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.internal_phy = {true, true, true, true, false},
},
- [KSZ8830] = {
- .chip_id = KSZ8830_CHIP_ID,
+ [KSZ88X3] = {
+ .chip_id = KSZ88X3_CHIP_ID,
.dev_name = "KSZ8863/KSZ8873",
.num_vlans = 16,
.num_alus = 0,
@@ -1453,7 +1453,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 4,
.num_ipms = 4,
.ops = &ksz88xx_dev_ops,
- .phylink_mac_ops = &ksz8830_phylink_mac_ops,
+ .phylink_mac_ops = &ksz88x3_phylink_mac_ops,
.mib_names = ksz88xx_mib_names,
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1487,7 +1487,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 4,
.num_ipms = 4,
.ops = &ksz88xx_dev_ops,
- .phylink_mac_ops = &ksz8830_phylink_mac_ops,
+ .phylink_mac_ops = &ksz88x3_phylink_mac_ops,
.mib_names = ksz88xx_mib_names,
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1510,7 +1510,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_tx_queues = 4,
.num_ipms = 4,
.ops = &ksz88xx_dev_ops,
- .phylink_mac_ops = &ksz8830_phylink_mac_ops,
+ .phylink_mac_ops = &ksz88x3_phylink_mac_ops,
.mib_names = ksz88xx_mib_names,
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -2724,7 +2724,7 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
struct ksz_device *dev = ds->priv;
switch (dev->chip_id) {
- case KSZ8830_CHIP_ID:
+ case KSZ88X3_CHIP_ID:
/* Silicon Errata Sheet (DS80000830A):
* Port 1 does not work with LinkMD Cable-Testing.
* Port 1 does not respond to received PAUSE control frames.
@@ -3050,7 +3050,7 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev))
proto = DSA_TAG_PROTO_KSZ8795;
- if (dev->chip_id == KSZ8830_CHIP_ID ||
+ if (dev->chip_id == KSZ88X3_CHIP_ID ||
dev->chip_id == KSZ8563_CHIP_ID ||
dev->chip_id == KSZ9893_CHIP_ID ||
dev->chip_id == KSZ9563_CHIP_ID)
@@ -3162,7 +3162,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
case KSZ8794_CHIP_ID:
case KSZ8765_CHIP_ID:
return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
- case KSZ8830_CHIP_ID:
+ case KSZ88X3_CHIP_ID:
case KSZ8864_CHIP_ID:
case KSZ8895_CHIP_ID:
return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
@@ -3334,7 +3334,7 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
return interface;
}
-static void ksz8830_phylink_mac_config(struct phylink_config *config,
+static void ksz88x3_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state)
{
@@ -3518,7 +3518,7 @@ static int ksz_switch_detect(struct ksz_device *dev)
break;
case KSZ88_FAMILY_ID:
if (id2 == KSZ88_CHIP_ID_63)
- dev->chip_id = KSZ8830_CHIP_ID;
+ dev->chip_id = KSZ88X3_CHIP_ID;
else
return -ENODEV;
break;
@@ -4592,24 +4592,24 @@ static int ksz9477_drive_strength_write(struct ksz_device *dev,
}
/**
- * ksz8830_drive_strength_write() - Set the drive strength configuration for
- * KSZ8830 compatible chip variants.
+ * ksz88x3_drive_strength_write() - Set the drive strength configuration for
+ * KSZ8863 compatible chip variants.
* @dev: ksz device
* @props: Array of drive strength properties to be set
* @num_props: Number of properties in the array
*
- * This function applies the specified drive strength settings to KSZ8830 chip
+ * This function applies the specified drive strength settings to KSZ88X3 chip
* variants (KSZ8873, KSZ8863).
* It ensures the configurations align with what the chip variant supports and
* warns or errors out on unsupported settings.
*
* Return: 0 on success, error code otherwise
*/
-static int ksz8830_drive_strength_write(struct ksz_device *dev,
+static int ksz88x3_drive_strength_write(struct ksz_device *dev,
struct ksz_driver_strength_prop *props,
int num_props)
{
- size_t array_size = ARRAY_SIZE(ksz8830_drive_strengths);
+ size_t array_size = ARRAY_SIZE(ksz88x3_drive_strengths);
int microamp;
int i, ret;
@@ -4622,10 +4622,10 @@ static int ksz8830_drive_strength_write(struct ksz_device *dev,
}
microamp = props[KSZ_DRIVER_STRENGTH_IO].value;
- ret = ksz_drive_strength_to_reg(ksz8830_drive_strengths, array_size,
+ ret = ksz_drive_strength_to_reg(ksz88x3_drive_strengths, array_size,
microamp);
if (ret < 0) {
- ksz_drive_strength_error(dev, ksz8830_drive_strengths,
+ ksz_drive_strength_error(dev, ksz88x3_drive_strengths,
array_size, microamp);
return ret;
}
@@ -4685,8 +4685,8 @@ static int ksz_parse_drive_strength(struct ksz_device *dev)
return 0;
switch (dev->chip_id) {
- case KSZ8830_CHIP_ID:
- return ksz8830_drive_strength_write(dev, of_props,
+ case KSZ88X3_CHIP_ID:
+ return ksz88x3_drive_strength_write(dev, of_props,
ARRAY_SIZE(of_props));
case KSZ8795_CHIP_ID:
case KSZ8794_CHIP_ID:
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index e08d5a1339f4..bec846e20682 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -200,7 +200,7 @@ enum ksz_model {
KSZ8795,
KSZ8794,
KSZ8765,
- KSZ8830,
+ KSZ88X3,
KSZ8864,
KSZ8895,
KSZ9477,
@@ -628,7 +628,7 @@ static inline bool ksz_is_ksz87xx(struct ksz_device *dev)
static inline bool ksz_is_ksz88x3(struct ksz_device *dev)
{
- return dev->chip_id == KSZ8830_CHIP_ID;
+ return dev->chip_id == KSZ88X3_CHIP_ID;
}
static inline bool ksz_is_8895_family(struct ksz_device *dev)
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index f4287310e89f..e3e341431f09 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -54,7 +54,7 @@ static int ksz_spi_probe(struct spi_device *spi)
if (!chip)
return -EINVAL;
- if (chip->chip_id == KSZ8830_CHIP_ID)
+ if (chip->chip_id == KSZ88X3_CHIP_ID)
regmap_config = ksz8863_regmap_config;
else if (chip->chip_id == KSZ8795_CHIP_ID ||
chip->chip_id == KSZ8794_CHIP_ID ||
@@ -137,7 +137,7 @@ static const struct of_device_id ksz_dt_ids[] = {
},
{
.compatible = "microchip,ksz8863",
- .data = &ksz_switch_chips[KSZ8830]
+ .data = &ksz_switch_chips[KSZ88X3]
},
{
.compatible = "microchip,ksz8864",
@@ -145,7 +145,7 @@ static const struct of_device_id ksz_dt_ids[] = {
},
{
.compatible = "microchip,ksz8873",
- .data = &ksz_switch_chips[KSZ8830]
+ .data = &ksz_switch_chips[KSZ88X3]
},
{
.compatible = "microchip,ksz8895",
diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h
index d074019474f5..2ee1a679e592 100644
--- a/include/linux/platform_data/microchip-ksz.h
+++ b/include/linux/platform_data/microchip-ksz.h
@@ -27,7 +27,7 @@ enum ksz_chip_id {
KSZ8795_CHIP_ID = 0x8795,
KSZ8794_CHIP_ID = 0x8794,
KSZ8765_CHIP_ID = 0x8765,
- KSZ8830_CHIP_ID = 0x8830,
+ KSZ88X3_CHIP_ID = 0x8830,
KSZ8864_CHIP_ID = 0x8864,
KSZ8895_CHIP_ID = 0x8895,
KSZ9477_CHIP_ID = 0x00947700,
--
2.43.0
Powered by blists - more mailing lists