[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240904085415.645031-1-frieder@fris.de>
Date: Wed, 4 Sep 2024 10:53:18 +0200
From: Frieder Schrempf <frieder@...s.de>
To: Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org,
imx@...ts.linux.dev,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Rob Herring <robh@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>
Cc: Frieder Schrempf <frieder.schrempf@...tron.de>,
Alexander Stein <alexander.stein@...tq-group.com>,
Conor Dooley <conor.dooley@...rochip.com>,
Fabio Estevam <festevam@...il.com>,
Francesco Dolcini <francesco.dolcini@...adex.com>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Hiago De Franco <hiago.franco@...adex.com>,
Hugo Villeneuve <hvilleneuve@...onoff.com>,
Joao Paulo Goncalves <joao.goncalves@...adex.com>,
Josua Mayer <josua@...id-run.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Mathieu Othacehe <m.othacehe@...il.com>,
Michael Walle <mwalle@...nel.org>,
Parthiban Nallathambi <parthiban@...umiz.com>,
Peng Fan <peng.fan@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>
Subject: [PATCH v3 0/3] Add support for Kontron OSM-S i.MX8MP SoM and carrier boards
From: Frieder Schrempf <frieder.schrempf@...tron.de>
Patch 1: board DT bindings
Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees
Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees
Changes for v3:
* Address Shawn's review comments (thanks!)
* Fix HDMI DDC interface
* Fix gpio-hog pinctrl in DL devicetree
* Fix DT check warnings in DL devicetree
* Adjust LVDS panel node to match that of proposed DL i.MX8MM
Changes for v2:
DT bindings (patch1):
* Add tags from Krzysztof and Conor (thanks!)
SMARC DTs (patch 3):
* Fix GPIO labels
* Add support for TPM chip on SMARC module
* Disable PWM in favor of GPIO5 on SMARC carrier
* Enable LCDIF node to make HDMI work
* Add support for GPIO expanders on SMARC carrier
* Remove SPI flash as its removable and should be in an overlay
* Add CAN regulators to fix transceiver enable
Frieder Schrempf (3):
dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier
board
arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval
carrier
.../devicetree/bindings/arm/fsl.yaml | 13 +
arch/arm64/boot/dts/freescale/Makefile | 6 +
.../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 305 ++++++
.../boot/dts/freescale/imx8mp-kontron-dl.dtso | 110 +++
.../dts/freescale/imx8mp-kontron-osm-s.dtsi | 908 ++++++++++++++++++
.../imx8mp-kontron-smarc-eval-carrier.dts | 254 +++++
.../dts/freescale/imx8mp-kontron-smarc.dtsi | 280 ++++++
7 files changed, 1876 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi
--
2.46.0
Powered by blists - more mailing lists