lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMRc=Mfes+=59WP8dcMsiUApqjsFrY9iVFEdKU6FbTKAFP1k_A@mail.gmail.com>
Date: Thu, 5 Sep 2024 20:19:34 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Kalle Valo <kvalo@...nel.org>
Cc: "David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, 
	Jeff Johnson <jjohnson@...nel.org>, linux-wireless@...r.kernel.org, 
	netdev@...r.kernel.org, devicetree@...r.kernel.org, 
	ath11k@...ts.infradead.org, linux-kernel@...r.kernel.org, 
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH net-next v2] dt-bindings: net: ath11k: document the inputs
 of the ath11k on WCN6855

On Thu, Sep 5, 2024 at 5:47 PM Kalle Valo <kvalo@...nel.org> wrote:
>
> Bartosz Golaszewski <brgl@...ev.pl> writes:
>
> >> > +  - if:
> >> > +      properties:
> >> > +        compatible:
> >> > +          contains:
> >> > +            const: pci17cb,1103
> >> > +    then:
> >> > +      required:
> >> > +        - vddrfacmn-supply
> >> > +        - vddaon-supply
> >> > +        - vddwlcx-supply
> >> > +        - vddwlmx-supply
> >> > +        - vddrfa0p8-supply
> >> > +        - vddrfa1p2-supply
> >> > +        - vddrfa1p8-supply
> >> > +        - vddpcie0p9-supply
> >> > +        - vddpcie1p8-supply
> >>
> >> Like we discussed before, shouldn't these supplies be optional as not
> >> all modules need them?
> >>
> >
> > The answer is still the same: the ATH11K inside a WCN6855 does - in
> > fact - always need them. The fact that the X13s doesn't define them is
> > bad representation of HW and I'm fixing it in a subsequent DTS patch.
>
> But, like we discussed earlier, M.2 boards don't need these so I think
> this should be optional.
>

If they are truly dynamic, plug-and-play M.2 boards then they
shouldn't need any description in device-tree. If they are M.2 sockets
that use custom, vendor-specific pins (like what is the case on
sc8280xp-crd and X13s) then the HW they carry needs to be described
correctly. We've discussed that before.

Bart

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ