| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3eeae62a-e22b-443a-aad4-f1a384c0a3f7@ideasonboard.com>
Date: Thu, 5 Sep 2024 09:48:27 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: Prabhakar <prabhakar.csengg@...il.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Kieran Bingham <kieran.bingham@...asonboard.com>,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
On 05/09/2024 00:07, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
>
> Hi All,
>
> This patch series aims to add the below features,
> - Support subdev active state
> - Support for streams
> - Support for virtual channel
> - Code cleanup
>
> Sending this is as an RFC, I've done limited testing and Im seeing issue
> when route is updated and wanted some feedback on the implementation.
>
> When route is updated for the sensor with below command, and when start
> streaming I get "Dangling sink streams: mask 0x1" error. Should the
> corresponding bridge also need to support routes to fix this? or is it
> something missing Ive missed in the current implementation.
>
> $ media-ctl -R "'ov5645 0-003c' [1/0->0/1[1]]"
>
> Output after route update:
> - entity 4: ov5645 0-003c (2 pads, 1 link, 1 route)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev1
> routes:
> 1/0 -> 0/1 [ACTIVE]
> pad0: SOURCE
> [stream:1 fmt:UYVY8_1X16/1920x1080 field:none colorspace:srgb
> crop:(0,0)/1920x1080]
> -> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE]
> pad1: SINK,0x8
> [stream:0 fmt:UYVY8_1X16/2592x1944 field:none colorspace:srgb
> crop:(0,0)/1920x1080]
I think you actually want 1/0->0/0 routing. The error says that the sink
side device has routing which does not have a stream at stream ID 1, or
no routing support at all, which implies a single stream at stream ID 0.
Tomi
>
> v4l2-compliance log after this patch series:
> --------------------------------------------
> root@...rc-rzg2l:~# v4l2-compliance -u /dev/v4l-subdev1
> v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t
> v4l2-compliance SHA: fc15e229d9d3 2024-07-23 19:22:15
>
> Compliance test for device /dev/v4l-subdev1:
>
> Driver Info:
> Driver version : 6.11.0
> Capabilities : 0x00000002
> Streams Support
> Client Capabilities:[ 53.919041] ov5645 0-003c: ================= START STATUS =================
> 0x0000000000000[ 53.927271] ov5645 0-003c: ================== END STATUS ==================
> 003
> streams interval-uses-which
> Required ioctls:
> test VIDIOC_SUDBEV_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev1 open: OK
> test VIDIOC_SUBDEV_QUERYCAP: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Sub-Device routing ioctls:
> test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK
> test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 12 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK (Not Supported)
> test Requests: OK (Not Supported)
>
> Total for device /dev/v4l-subdev1: 47, Succeeded: 47, Failed: 0, Warnings: 0
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (12):
> media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
> media: i2c: ov5645: Use local `dev` pointer for subdev device
> assignment
> media: i2c: ov5645: Enable runtime PM after
> v4l2_async_register_subdev()
> media: i2c: ov5645: Use dev_err_probe instead of dev_err
> media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
> media: i2c: ov5645: Drop `power_lock` mutex
> media: i2c: ov5645: Use subdev active state
> media: i2c: ov5645: Switch to {enable,disable}_streams
> media: i2c: ov5645: Add internal image sink pad
> media: i2c: ov5645: Report internal routes to userspace
> media: i2c: ov5645: Report streams using frame descriptors
> media: i2c: ov5645: Add virtual channel support
>
> drivers/media/i2c/ov5645.c | 507 +++++++++++++++++++++++--------------
> 1 file changed, 316 insertions(+), 191 deletions(-)
>
Powered by blists - more mailing lists