linux-kernel - Re: [PATCH] arm64: dts: qcom: sa8775p-ride: add WiFi/BT nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <d6mt6i4a6xa3juvn4gzytuhsot2kx7dn4wmm3kmgwywfj2hcau@leecyxx36wql>
Date: Thu, 5 Sep 2024 15:49:56 +0300
From: Dmitry Baryshkov <dbaryshkov@...il.com>
To: Miaoqing Pan <quic_miaoqing@...cinc.com>
Cc: linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org, 
	agross@...nel.org, andersson@...nel.org, linux-kernel@...r.kernel.org, 
	konrad.dybcio@...aro.org, mchehab@...nel.org, quic_vgarodia@...cinc.com, 
	stanimir.k.varbanov@...il.com
Subject: Re: [PATCH] arm64: dts: qcom: sa8775p-ride: add WiFi/BT nodes

On Thu, Sep 05, 2024 at 02:48:17PM GMT, Miaoqing Pan wrote:
> Add a node for the PMU module of the WCN6855 present on the sa8775p-ride
> board. Assign its LDO power outputs to the existing WiFi/Bluetooth module.
> 
> Signed-off-by: Miaoqing Pan <quic_miaoqing@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 119 +++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi      |   2 +-
>  2 files changed, 120 insertions(+), 1 deletion(-)
> 
> @@ -837,3 +939,20 @@ &usb_2_hsphy {
>  &xo_board_clk {
>  	clock-frequency = <38400000>;
>  };
> +
> +&pcieport0 {
> +	wifi@0 {
> +		compatible = "pci17cb,1101";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;

Please add

qcom,ath11k-calibration-variant = "name";

> +	};
> +};

-- 
With best wishes
Dmitry