[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6vikrqhdnkefzpahhhtz2hpi62jvcwnzclm7touwtnpxdzvgrf@uc7r6a7bbjek>
Date: Thu, 5 Sep 2024 15:50:53 +0300
From: Dmitry Baryshkov <dbaryshkov@...il.com>
To: Bartosz Golaszewski <brgl@...ev.pl>
Cc: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konradybcio@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH v3 1/4] arm64: dts: qcom: sc8280xp-crd: model the PMU of
the on-board wcn6855
On Thu, Sep 05, 2024 at 02:20:19PM GMT, Bartosz Golaszewski wrote:
> From: Konrad Dybcio <konradybcio@...nel.org>
>
> Add nodes for the WCN6855 PMU, the WLAN module and relevant regulators
> and pin functions to fully describe how the wifi is actually wired on
> this platform.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> Signed-off-by: Konrad Dybcio <konradybcio@...nel.org>
> [Bartosz:
> - write the commit message,
> - rebase Konrad's commit,
> - fix one of the supplies' name]
> Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 108 ++++++++++++++++++++++
> 1 file changed, 108 insertions(+)
>
> @@ -583,6 +668,23 @@ &pcie4_phy {
> status = "okay";
> };
>
> +&pcie4_port0 {
> + wifi@0 {
> + compatible = "pci17cb,1103";
> + reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
> + vddaon-supply = <&vreg_pmu_aon_0p8>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
As you are going to post another revision, please also add
qcom,ath11k-calibration-variant
> + };
> +};
> +
> &pmc8280c_lpg {
> status = "okay";
> };
--
With best wishes
Dmitry
Powered by blists - more mailing lists