lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240906145719.387824-3-maxime.chevallier@bootlin.com> Date: Fri, 6 Sep 2024 16:57:17 +0200 From: Maxime Chevallier <maxime.chevallier@...tlin.com> To: davem@...emloft.net, Michal Kubecek <mkubecek@...e.cz> Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, thomas.petazzoni@...tlin.com, Andrew Lunn <andrew@...n.ch>, Jakub Kicinski <kuba@...nel.org>, Eric Dumazet <edumazet@...gle.com>, Paolo Abeni <pabeni@...hat.com>, Russell King <linux@...linux.org.uk>, Christophe Leroy <christophe.leroy@...roup.eu>, Herve Codina <herve.codina@...tlin.com>, Florian Fainelli <f.fainelli@...il.com>, Heiner Kallweit <hkallweit1@...il.com>, Oleksij Rempel <o.rempel@...gutronix.de>, Simon Horman <horms@...nel.org> Subject: [PATCH ethtool-next v4 2/3] ethtool: Allow passing a PHY index for phy-targetting commands With the introduction of PHY topology and the ability to list PHYs, we can now target some netlink commands to specific PHYs. This is done by passing a PHY index as a request parameter in the netlink GET command. This is useful for PSE-PD, PLCA and Cable-testing operations when multiple PHYs are on the link (e.g. when a PHY is used as an SFP upstream controller, and when there's another PHY within the SFP module). Introduce a new, generic, option "--phy N" that can be used in conjunction with PHY-targetting commands to pass the PHY index for the targetted PHY. Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com> --- ethtool.8.in | 21 ++++++++++++++++++ ethtool.c | 28 +++++++++++++++++++++++- internal.h | 1 + netlink/cable_test.c | 4 ++-- netlink/msgbuff.c | 52 ++++++++++++++++++++++++++++++++++---------- netlink/msgbuff.h | 3 +++ netlink/nlsock.c | 3 ++- netlink/plca.c | 4 ++-- netlink/pse-pd.c | 4 ++-- 9 files changed, 100 insertions(+), 20 deletions(-) diff --git a/ethtool.8.in b/ethtool.8.in index 11bb0f9..f16cdbd 100644 --- a/ethtool.8.in +++ b/ethtool.8.in @@ -143,6 +143,10 @@ ethtool \- query or control network driver and hardware settings .B ethtool [-I | --include-statistics] .I args .HP +.B ethtool +.BN --phy +.I args +.HP .B ethtool \-\-monitor [ .I command @@ -588,6 +592,23 @@ plain text in the presence of this option. Include command-related statistics in the output. This option allows displaying relevant device statistics for selected get commands. .TP +.BI \-\-phy \ N +Target a PHY within the interface. The PHY index can be retrieved with +.B \-\-show\-phys. PHY index 0 targets the phy device directly attached to +the ethernet MAC, if any. +The following commands can accept a PHY index: +.TS +nokeep; +lB l. +\-\-cable\-test +\-\-cable\-test\-tdr +\-\-get\-plca\-cfg +\-\-set\-plca\-cfg +\-\-get\-plca\-status +\-\-show-pse +\-\-set-pse +.TE +.TP .B \-a \-\-show\-pause Queries the specified Ethernet device for pause parameter information. .RS 4 diff --git a/ethtool.c b/ethtool.c index 7f47407..4dc05c2 100644 --- a/ethtool.c +++ b/ethtool.c @@ -5739,6 +5739,7 @@ struct option { const char *opts; bool no_dev; bool json; + bool targets_phy; int (*func)(struct cmd_context *); nl_chk_t nlchk; nl_func_t nlfunc; @@ -6158,12 +6159,14 @@ static const struct option args[] = { }, { .opts = "--cable-test", + .targets_phy = true, .json = true, .nlfunc = nl_cable_test, .help = "Perform a cable test", }, { .opts = "--cable-test-tdr", + .targets_phy = true, .json = true, .nlfunc = nl_cable_test_tdr, .help = "Print cable test time domain reflectrometery data", @@ -6191,11 +6194,13 @@ static const struct option args[] = { }, { .opts = "--get-plca-cfg", + .targets_phy = true, .nlfunc = nl_plca_get_cfg, .help = "Get PLCA configuration", }, { .opts = "--set-plca-cfg", + .targets_phy = true, .nlfunc = nl_plca_set_cfg, .help = "Set PLCA configuration", .xhelp = " [ enable on|off ]\n" @@ -6207,6 +6212,7 @@ static const struct option args[] = { }, { .opts = "--get-plca-status", + .targets_phy = true, .nlfunc = nl_plca_get_status, .help = "Get PLCA status information", }, @@ -6228,12 +6234,14 @@ static const struct option args[] = { }, { .opts = "--show-pse", + .targets_phy = true, .json = true, .nlfunc = nl_gpse, .help = "Show settings for Power Sourcing Equipment", }, { .opts = "--set-pse", + .targets_phy = true, .nlfunc = nl_spse, .help = "Set Power Sourcing Equipment settings", .xhelp = " [ podl-pse-admin-control enable|disable ]\n" @@ -6270,7 +6278,8 @@ static int show_usage(struct cmd_context *ctx __maybe_unused) fprintf(stdout, "Usage:\n"); for (i = 0; args[i].opts; i++) { fputs(" ethtool [ FLAGS ] ", stdout); - fprintf(stdout, "%s %s\t%s\n", + fprintf(stdout, "%s%s %s\t%s\n", + args[i].targets_phy ? "[ --phy PHY ] " : "", args[i].opts, args[i].no_dev ? "\t" : "DEVNAME", args[i].help); @@ -6550,6 +6559,19 @@ int main(int argc, char **argp) argc -= 1; continue; } + if (*argp && !strcmp(*argp, "--phy")) { + char *eptr; + + if (argc < 2) + exit_bad_args_info("--phy parameters expects a phy index"); + + ctx.phy_index = strtoul(argp[1], &eptr, 0); + if (!argp[1][0] || *eptr) + exit_bad_args_info("invalid phy index"); + argp += 2; + argc -= 2; + continue; + } break; } if (*argp && !strcmp(*argp, "--monitor")) { @@ -6585,6 +6607,10 @@ int main(int argc, char **argp) } if (ctx.json && !args[k].json) exit_bad_args_info("JSON output not available for this subcommand"); + + if (!args[k].targets_phy && ctx.phy_index) + exit_bad_args_info("Unexpected --phy parameter"); + ctx.argc = argc; ctx.argp = argp; netlink_run_handler(&ctx, args[k].nlchk, args[k].nlfunc, !args[k].func); diff --git a/internal.h b/internal.h index 4b994f5..afb8121 100644 --- a/internal.h +++ b/internal.h @@ -222,6 +222,7 @@ struct cmd_context { unsigned long debug; /* debugging mask */ bool json; /* Output JSON, if supported */ bool show_stats; /* include command-specific stats */ + uint32_t phy_index; /* the phy index this command targets */ #ifdef ETHTOOL_ENABLE_NETLINK struct nl_context *nlctx; /* netlink context (opaque) */ #endif diff --git a/netlink/cable_test.c b/netlink/cable_test.c index 9305a47..ba21c6c 100644 --- a/netlink/cable_test.c +++ b/netlink/cable_test.c @@ -572,8 +572,8 @@ int nl_cable_test_tdr(struct cmd_context *ctx) if (ret < 0) return 2; - if (ethnla_fill_header(msgbuff, ETHTOOL_A_CABLE_TEST_TDR_HEADER, - ctx->devname, 0)) + if (ethnla_fill_header_phy(msgbuff, ETHTOOL_A_CABLE_TEST_TDR_HEADER, + ctx->devname, ctx->phy_index, 0)) return -EMSGSIZE; ret = nl_parser(nlctx, tdr_params, NULL, PARSER_GROUP_NEST, NULL); diff --git a/netlink/msgbuff.c b/netlink/msgbuff.c index 216f5b9..2275840 100644 --- a/netlink/msgbuff.c +++ b/netlink/msgbuff.c @@ -138,17 +138,9 @@ struct nlattr *ethnla_nest_start(struct nl_msg_buff *msgbuff, uint16_t type) return NULL; } -/** - * ethnla_fill_header() - write standard ethtool request header to message - * @msgbuff: message buffer - * @type: attribute type for header nest - * @devname: device name (NULL to omit) - * @flags: request flags (omitted if 0) - * - * Return: pointer to the nest attribute or null of error - */ -bool ethnla_fill_header(struct nl_msg_buff *msgbuff, uint16_t type, - const char *devname, uint32_t flags) +static bool __ethnla_fill_header_phy(struct nl_msg_buff *msgbuff, uint16_t type, + const char *devname, uint32_t phy_index, + uint32_t flags) { struct nlattr *nest; @@ -159,7 +151,9 @@ bool ethnla_fill_header(struct nl_msg_buff *msgbuff, uint16_t type, if ((devname && ethnla_put_strz(msgbuff, ETHTOOL_A_HEADER_DEV_NAME, devname)) || (flags && - ethnla_put_u32(msgbuff, ETHTOOL_A_HEADER_FLAGS, flags))) + ethnla_put_u32(msgbuff, ETHTOOL_A_HEADER_FLAGS, flags)) || + (phy_index && + ethnla_put_u32(msgbuff, ETHTOOL_A_HEADER_PHY_INDEX, phy_index))) goto err; ethnla_nest_end(msgbuff, nest); @@ -170,6 +164,40 @@ err: return true; } +/** + * ethnla_fill_header() - write standard ethtool request header to message + * @msgbuff: message buffer + * @type: attribute type for header nest + * @devname: device name (NULL to omit) + * @flags: request flags (omitted if 0) + * + * Return: pointer to the nest attribute or null of error + */ +bool ethnla_fill_header(struct nl_msg_buff *msgbuff, uint16_t type, + const char *devname, uint32_t flags) +{ + return __ethnla_fill_header_phy(msgbuff, type, devname, 0, flags); +} + +/** + * ethnla_fill_header_phy() - write standard ethtool request header to message, + * targetting a device's phy + * @msgbuff: message buffer + * @type: attribute type for header nest + * @devname: device name (NULL to omit) + * @phy_index: phy index to target (0 to omit) + * @flags: request flags (omitted if 0) + * + * Return: pointer to the nest attribute or null of error + */ +bool ethnla_fill_header_phy(struct nl_msg_buff *msgbuff, uint16_t type, + const char *devname, uint32_t phy_index, + uint32_t flags) +{ + return __ethnla_fill_header_phy(msgbuff, type, devname, phy_index, + flags); +} + /** * __msg_init() - init a genetlink message, fill netlink and genetlink header * @msgbuff: message buffer diff --git a/netlink/msgbuff.h b/netlink/msgbuff.h index 7d6731f..7df19fc 100644 --- a/netlink/msgbuff.h +++ b/netlink/msgbuff.h @@ -47,6 +47,9 @@ bool ethnla_put(struct nl_msg_buff *msgbuff, uint16_t type, size_t len, struct nlattr *ethnla_nest_start(struct nl_msg_buff *msgbuff, uint16_t type); bool ethnla_fill_header(struct nl_msg_buff *msgbuff, uint16_t type, const char *devname, uint32_t flags); +bool ethnla_fill_header_phy(struct nl_msg_buff *msgbuff, uint16_t type, + const char *devname, uint32_t phy_index, + uint32_t flags); /* length of current message */ static inline unsigned int msgbuff_len(const struct nl_msg_buff *msgbuff) diff --git a/netlink/nlsock.c b/netlink/nlsock.c index 0ec2738..0b873a3 100644 --- a/netlink/nlsock.c +++ b/netlink/nlsock.c @@ -291,7 +291,8 @@ int nlsock_prep_get_request(struct nl_socket *nlsk, unsigned int nlcmd, ret = msg_init(nlctx, &nlsk->msgbuff, nlcmd, nlm_flags); if (ret < 0) return ret; - if (ethnla_fill_header(&nlsk->msgbuff, hdr_attrtype, devname, flags)) + if (ethnla_fill_header_phy(&nlsk->msgbuff, hdr_attrtype, devname, + nlctx->ctx->phy_index, flags)) return -EMSGSIZE; return 0; diff --git a/netlink/plca.c b/netlink/plca.c index 7d61e3b..7dc30a3 100644 --- a/netlink/plca.c +++ b/netlink/plca.c @@ -211,8 +211,8 @@ int nl_plca_set_cfg(struct cmd_context *ctx) NLM_F_REQUEST | NLM_F_ACK); if (ret < 0) return 2; - if (ethnla_fill_header(msgbuff, ETHTOOL_A_PLCA_HEADER, - ctx->devname, 0)) + if (ethnla_fill_header_phy(msgbuff, ETHTOOL_A_PLCA_HEADER, + ctx->devname, ctx->phy_index, 0)) return -EMSGSIZE; ret = nl_parser(nlctx, set_plca_params, NULL, PARSER_GROUP_NONE, NULL); diff --git a/netlink/pse-pd.c b/netlink/pse-pd.c index 2c8dd89..3f6b6aa 100644 --- a/netlink/pse-pd.c +++ b/netlink/pse-pd.c @@ -240,8 +240,8 @@ int nl_spse(struct cmd_context *ctx) NLM_F_REQUEST | NLM_F_ACK); if (ret < 0) return 2; - if (ethnla_fill_header(msgbuff, ETHTOOL_A_PSE_HEADER, - ctx->devname, 0)) + if (ethnla_fill_header_phy(msgbuff, ETHTOOL_A_PSE_HEADER, + ctx->devname, ctx->phy_index, 0)) return -EMSGSIZE; ret = nl_parser(nlctx, spse_params, NULL, PARSER_GROUP_NONE, NULL); -- 2.46.0
Powered by blists - more mailing lists