[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240906062701.37088-26-Delphine_CC_Chiu@wiwynn.com>
Date: Fri, 6 Sep 2024 14:26:51 +0800
From: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>
To: patrick@...cx.xyz,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>
Cc: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org
Subject: [PATCH v15 25/32] ARM: dts: aspeed: yosemite4: add RTQ6056 support
Add RTQ6056 (spider board 3rd source) support in yosemite4 DTS.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>
---
.../boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f73719b3c2f1..03a1e41312e3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1240,35 +1240,35 @@ adc@37 {
};
power-sensor@40 {
- compatible = "ti,ina233";
+ compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x40>;
resistor-calibration = /bits/ 16 <0x0a00>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@41 {
- compatible = "ti,ina233";
+ compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x41>;
resistor-calibration = /bits/ 16 <0x0a00>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@42 {
- compatible = "ti,ina233";
+ compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x42>;
resistor-calibration = /bits/ 16 <0x0a00>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@43 {
- compatible = "ti,ina233";
+ compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x43>;
resistor-calibration = /bits/ 16 <0x0a00>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@44 {
- compatible = "ti,ina233";
+ compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x44>;
resistor-calibration = /bits/ 16 <0x0a00>;
current-lsb= /bits/ 16 <0x0001>;
--
2.25.1
Powered by blists - more mailing lists