linux-kernel - [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240906065449.2897-1-kimriver.liu@siengine.com>
Date: Fri, 6 Sep 2024 14:54:49 +0800
From: Kimriver Liu <kimriver.liu@...ngine.com>
To: <jarkko.nikula@...ux.intel.com>
CC: <andriy.shevchenko@...ux.intel.com>, <mika.westerberg@...ux.intel.com>,
        <jsd@...ihalf.com>, <andi.shyti@...nel.org>,
        <linux-i2c@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <kimriver.liu@...ngine.com>
Subject: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled

It was observed issuing ABORT bit(IC_ENABLE[1]) will not work when
IC_ENABLE is already disabled.

Check if ENABLE bit(IC_ENABLE[0]) is disabled when the master is
holding SCL low. If ENABLE bit is disabled, the software need
enable it before trying to issue ABORT bit. otherwise,
the controller ignores any write to ABORT bit.

Signed-off-by: Kimriver Liu <kimriver.liu@...ngine.com>

---
V4->V5: delete master idling checking
V3->V4:
      1. update commit messages and add patch version and changelog
      2. move print the error message in i2c_dw_xfer
V2->V3: change (!enable) to (!(enable & DW_IC_ENABLE_ENABLE))
V1->V2: used standard words in function names and addressed review comments

link to V1:
https://lore.kernel.org/lkml/20240904064224.2394-1-kimriver.liu@siengine.com/
---
 drivers/i2c/busses/i2c-designware-common.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index e8a688d04aee..2b3398cd4382 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -453,6 +453,17 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
 
 	abort_needed = raw_intr_stats & DW_IC_INTR_MST_ON_HOLD;
 	if (abort_needed) {
+		if (!(enable & DW_IC_ENABLE_ENABLE)) {
+			regmap_write(dev->map, DW_IC_ENABLE, DW_IC_ENABLE_ENABLE);
+			enable |= DW_IC_ENABLE_ENABLE;
+			/*
+			 * Wait two ic_clk delay when enabling the I2C to ensure ENABLE bit
+			 * is already set by the driver (for 400KHz this is 25us)
+			 * as described in the DesignWare I2C databook.
+			 */
+			fsleep(25);
+		}
+
 		regmap_write(dev->map, DW_IC_ENABLE, enable | DW_IC_ENABLE_ABORT);
 		ret = regmap_read_poll_timeout(dev->map, DW_IC_ENABLE, enable,
 					       !(enable & DW_IC_ENABLE_ABORT), 10,
-- 
2.17.1